GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens

GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens

Item # STL111RCB

lowest price pledge

Retail:$20.97

Our Price: $13.64

You Save: 35%
Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.34 lbs

Quantity: 
STL111RCB - Oval Optronics Trailer Lights
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Tail Lights
  • Oval
  • LED Light
  • Red
  • Recessed Mount
  • 6-1/2L x 2W Inch
  • Submersible Lights
  • Optronics
  • Stop/Turn/Tail
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug. Lowest Prices for the best trailer lights from Optronics. GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens part number STL111RCB can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (593)
  • Q & A (2)
  • Videos (4)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - STL111RCB

6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.


Features:

  • Oval trailer tail light serves 3 functions
    • Turn signal light
    • Tail light
    • Brake light
  • GloLight lens creates a solid light pattern with a smooth appearance
    • Outer band of LEDs functions as tail light
    • Center red LEDs act as turn signal and brake light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows improved heat distribution and thinner construction
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red and clear lens over white LEDs
  • Polycarbonate housing and acrylic lens
  • Recessed mount with grommet (A70GB - sold separately)
  • Accepts industry-standard 3-prong plug (A45PB or A47PB - sold separately)
  • Requires standard 3-prong plug (sold separately) and rubber grommet (sold separately) for installation
  • DOT compliant
    • Meets FMVSS 108 and CMVSS requirements for automotive lighting


Specs:

  • Quantity: 1 tail light
  • Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" deep
  • Diodes: 22
  • Power draw at 12.8 volts:
    • Tail light: 0.259 amps
    • Stop/turn light: 0.59 amps
  • Lifetime warranty on LEDs


Optronics oval Glow lights dimensions

Innovative GloLight Design

Optronics Glow lights lit around the edge

This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.


Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


LEDs vs. Incandescent Lights

The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.


Surface Mount Technology

The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.


PL-3 Wiring Connection

Back of Optronics Glow light showing standard 3-prong plug mount

This GloLight has a standard 3-prong plug as pictured above. A 3-prong pigtail (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer. An optional mounting bracket is also available (BK70BB - sold separately) to make it easier to mount the light on your trailer.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a housing or a grommet (A70GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL111RCB Optronics Glow Light LED Trailer Combination Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - 6-1/2" Oval - Clear Lens - Standard PL3, 3-Prong Plug







Video of GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics GloLight Trailer Lights Manufacturer Review

Brett Johnson: (silence)The Glolight is the stunning combination of premier lighting technology, meeting world-class style and capabilities. The introduction of the Glolight series represents the first truly different approach in years to the visual presentation of stop-tail-turn lamps.Most LED lamps have hotspots or patterns of bright light. Glolight lamps are visually distinctive from other LED lamps, because their lenses diffuse the light, giving them a smooth, bright, glowing appearance.The Glolight optical technology is so different, it's patentable. And Optronics has 35 new products with Glolight technology in its pipeline, right now. Mudd: Lighting is one of the most visibly predominant features on any vehicle, and this is a completely different looking yet highly effective light. We're focused on integrating the latest technology into our manufacturing process, and these new lights clearly represent the innovative partnership between Vanguard and Optronics.

Innovation is important to Vanguard, our customers, and our industry. Robert: Glolight technology looks different because it is different. Different in its optical approach and different all the way down to the circuit boards.We designed and manufactured all of our lamps using the most advanced engineering techniques, and test them in our own world-class, state-of-the-art optical testing facility. Lamps are engineered to resist everything, from shock, to dust, to high-velocity water spray. We're committed to designing and manufacturing erosion-resistant LED lighting products.

And Glolight lamps are produced using solid state, surface-mount device, or SMD, technology.Most LED lamps sold in the heavy duty market today, use what is typically referred to as "through hole" construction. Optronics LEDs are mounted directly to the surface of the circuit board, eliminating exposure to connecting points. LED lamps with SMD technology, like Optronics' new Glolight, are so robust that they can continue to function even if their circuit board is completely submerged in water. The unique Glolight lenses and housings are made of tough polycarbonate material that is sonically welded to create an impermeable seal. Glolight lamps meet all FMVSS 108 and SAE photometric requirements for visibility and safety.

And our lamps are tested at a certified, independent laboratory.I guess it's redundant to say this, but our lamps come with a lifetime warranty. Roush: There's nothing out there that's as eye-catching and effective as these Glolight lamps. Vanguard is always drawn to component supplier products that contribute to our customers' efforts to operate more effectively and safely. Glolight lamps just look different and more noticeable. And that means better safety.

Brett Johnson: With world-class manufacturing facilities, harness making capabilities, and a global market presence, Optronics is now changing the competitive landscape in HD lighting. We always have access to a lighting manufacturer with global sophistication, fleets are enjoying increased product availability, and everyone is befitting from new, innovative technology and the industry's most competitive pricing structure. With Glolight, Optronics is sending a signal that things have changed in the HD lighting industry.


Customer Reviews

GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens - STL111RCB

Average Customer Rating:  4.9 out of 5 stars   (593 Customer Reviews)

6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.

- STL111RCB
by:

I really like these lights. I use them for my rear lighting and rear side marker/turn signals. I went out of the way to use these on my trailer which involved reinforcing the frame since I had to cut a large piece out to install them. Well worth it. They are bright and have a distinctive look. 524591



- STL111RCB
by:

EVERYTHING WENT PERFECT! THANK YOU SO M UCH! 602870



- STL111RCB
by:

Looks great 550639



- STL111RCB
by:

Replaced existing incandescent lights in an enclosed trailer. These LED’s are an excellent replacement, are highly visible, and good looking. 493607



- STL111RCB
by:

Just got my Optronics glolight tail lights.(Thanks etrailer and George J.) They look awesome installed, very unique setup. If you want the best service and price, you must go with etrailer.com!! 483170


Comments

Coudnt be happier with my lights and service from Etrailer. Best ever!!!

Dan W - 03/10/2019

50358

- STL111RCB
by:

I have a trailer project that will end up becoming a teardrop camper. I like the way this tail light looks. 468027



- STL111RCB
by:

This side marker clearance light will be installed on a trailer I am building. The lens cover snaps off for access to the two mounting holes located on the base of the fixture. Once you know that the lens cover comes off, it is easy to determine how to mount this fixture. 465283



- STL111RCB
by:

As always the employees at etrailer answered all my questions and even offered a better solution to my issue that was less money. everything arrived on time and as promised. it is a pleasure doing business with them 450737



- STL111RCB
by:

These have a nice look and was a great upgrade for my snowmobile trailer. 445152



- STL111RCB
by:

Much better than the older led units that the trailer came with. Would highly recommend. 358332



- STL111RCB
by:

The lights came in record time. There LED trailer lights are exactley what I ordered. They work great and look great 350428



- STL111RCB
by:

Great looking light love it. Easy ordering and fast thankyou 296377



- STL111RCB
by:

These lights look and work great! They installed directly in place of the non-LED lights that were on the truck. In my case they are the tail, turn and brake light mounted on the rear post of a 1 ton dump truck. 244035


Comments

These lights are great! Theyre still working like new and are very bright ! If that wasnt good enough E-Trailer Service is the best! Thanks

THOMAS W - 05/20/2017

24031

- STL111RCB
by:

order came wed everything ok am having it put on Friday . thank you 121561



- STL190RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Lights still work great, they give a good look to the trailer. 629339



- STL190RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Had originally ordered a different unit, but Lori called to say they would be on backorder from the maker. She suggested these to replace units that on our 81 Burro rebuild. Great service! 588149



- ST9RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Well packed, good quality, delivered on time.......Great deal 224808


Comments

A no regret purchase. Thank you.

John B - 09/09/2016

20867

- ST9RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Product came on-time..no damage..works great! 148890


Comments

No problems with product. Would purchase again. Thanks.

N.D. - 08/31/2015

14652

- MCL110AKB
by:

Review from a similar Optronics GloLight in Trailer Lights


Everything I have purchased from this company has been great, The quality and ptrice is right on, Thanks.. 568961



- STL190RB
by:

Review from a similar Optronics GloLight in Trailer Lights


The lights on line didn't seem to put out enough light. But I got them installed and they work great, and they are very visible. I rebuilt a 1963 Aristocrat 13 ft. it's called the "Lil Loafer" buy the factory and I wanted round lights to replicate the originals, these are round and almost the exact same size and it doesn't hurt my feelings at all that they are LED lights.. 484192


Comments

I still am impressed as to how noticeable they are at night. No I never regretted purchasing those lights, easy install, work great. And the trailer originally had round tail lights. I have just purchased another set of tail lights from you, just a couple days ago. Again Oval shaped 52 diode LED. These are going on a trailer that I cant find anything about, other than it was manufactured in San Jacinto California in the 1980s. I think these new lights are going to look great on there, I think original was probably an ugly square one. The trailer is a 19 ft. , 1983 Tow Lite fifth wheel single axle. I swear it was built for off road the way it looks, and it looks stock.

Bill - 03/19/2019

50722

- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


These lights are pretty impressive for trailer lights. I would be lying if I said I didn't consider putting a pair of them on my truck. The appearance is excellent, function is excellent, and I am overall very pleased with these lights. I installed them on my flatbed and livestock trailers - both look phenomenal but the vertical mount on the livestock trailer is most impressive. Installation was a snap with the new rubber bushings (purchased from etrailer for less than $1/each). You just can't go wrong for this price. I haven't seen STT lights I have liked as well as these. As far as the shipping goes, I live in West Central Illinois and these items arrived in less than 24 hours with the standard shipping. You cannot, and I mean cannot, beat etrailer for customer-centered service. OUTSTANDING!!! 102044



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great lights. I get asked about them everywhere I go. Super bright and being led they are have very low amp draw. I led a small caravan once in heavy rain. Those that were behind me could not believe how well my trailer lights blasted through the rain. 525292



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


Light requires the use of a grommet to fix it into a recess. A video of how the grommet is installed & works with the light would be helpful. I spend a lot of time getting the grommet with the light to fit nicely note the hole needs to be a little bit larger than the light which is dimensioned in its description. Looks and fits great once installed properly. Nice products! 511515



- STL101RMB
by:

Review from a similar Optronics GloLight in Trailer Lights


Website is awesome instructional video on each product was very hopeful In deciding which product was most suitable for me I purchased all new LED lights for my utility trailer After searching multiple different companies this one was most thorough and had the best selection Ordered multiple different products showed up at my doorstep days later 589199



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Put the STL111RB lights on my boat trailer a year ago, still working GREAT!!! In and out of Florida gulf coast saltwater at least once a week. These lights will probably outlast the trailer they are on. 593671



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


So far so good. Got the lights installed and tested them out and they look great! I will say packaging was questionable, they were loosely packed in a box that was too big with no bubble wrap or stuffing to keep them from bouncing around or against each other. Thankfully none appeared cracked or broken, and hopefully it's a sign of their toughness and not a sign of etrailer's lack of care. 383215



- STL101RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great product. Very bright and love the halo with the led effect. Putting them on all of our trucks now. 336805


Comments

Lights are great. Still working and bright.

Kelsey - 01/30/2018

33976

- STL101RFB
by:

Review from a similar Optronics GloLight in Trailer Lights


etrailer extremely helpful & knowledgeable about the products they sell. very good about getting them to you . will order from Katie at etrailer again. 160535



- STL178RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Awesome product. Very bright! 605721



- STL190RB
by:

Review from a similar Optronics GloLight in Trailer Lights


These look great on our vintage canned ham camper, leds are so bright great product. Best company. 565718



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed. 403017



- STL101RB
by:

Review from a similar Optronics GloLight in Trailer Lights


These lights are just the look I was after for my Jeep. Not the run-of-the-mill, every day LED tail light. 233131



- ST9RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great Product, it's good quality and will fit perfectly for the trailer I use in my Air Conditioning, Heating & Refrigeration Business. The only problem is I ordered the wrong side. Wasn't sure if by the which one was the left or the right? I was looking at the trailer form the front when I determined it was the left one but it appears your suppose to look at the back of the trailer when you do that. Guess I will be ordering the otherside here shortly. Maybe I can get an exchange or if not then I will have a spare and hope if it does get broken again it's the other side. Etrailer has some really good quality stuff at a very good price. I got my hidden hitch from them at a Great Price. They even had a video that showed me how to install it. A couple of the local places here wanted 3 times the amount of what I paid to provide the hitch and install it for me. Will never go anywhere else for any trailer parts or accessories. 21144



- STL108RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Very good glow light trailer lights. I mounted them on a small 1972 Coleman VersaTrailer. Very pleased with quality and the glow light appearance. Very strong light as well. 259906



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Used on a motorcycle with a blinker cir cuit. 649958



- STL101RB
by:

Review from a similar Optronics GloLight in Trailer Lights


As always fast and wonderful service from etrailer. These lights are exactly what I needed. So much brighter and safer than what I had on there before. Easy to install, plug and go! Thanks etrailer! 348342



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Peterson trailer lights started cross feeding between 1157 incandescent brake and taillights. After checking all wire splices and cleaning trailer to tow vehicle plug connection, the problem persisted. It wasn't horrendous but still bugged me; so I tried Optronics LED's. No cross feed with the LED's, and to my eye the LED's are brighter in direct comparison with 1157 still mounted in the lower position. 190153



- STL101RCB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great light & SERVICE'' thanks 143114


Comments

just like a timex watch takes a licking

JOHN M - 07/27/2015

13654

- UCL178RFP2B
by:

Review from a similar Optronics GloLight in Trailer Lights


Being used to put back up lights on trailer. Never had back up lights before. Very well made. 612007



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


Nice bright back up light, would recommend to anyone looking to replace there old style lights with led lights 278762



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


As always the employees at etrailer answered all my questions and even offered a better solution to my issue that was less money. everything arrived on time and as promised. it is a pleasure doing business with them 450734



- STL101RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Although rubber gasket did fit into my 4 7/16" hole the LED tail light did not fit with gasket installed. I had to make my hole 4.5" and then I had to apply a lot of force to get the tail light installed into the rubber gasket. 538284



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


Couldn't find anything like this anywhere. This reverse light far outshines other 6" oval led types I've had and seen. Was rear ended recently, and the old ones of this same style were knocked out and run over. Fits my 2012 ranch hand sport series bumper. 490512



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great Light! Put two on the back of a toyhauler for backing up. You will need the grommet and pigtail to do it right. I had to cut two oval holes for mounting in trailer frame. Take your time with the layout and get the right sized hole saw, makes installation pretty easy. 586398



- STL101RMB
by:

Review from a similar Optronics GloLight in Trailer Lights


I absolutely love my new tail lights. They are extremely bright and I have recommended them to all of my friends with Jeeps! 138043



- STL111RB
by:

Review from a similar Optronics GloLight in Trailer Lights


I ordered replacement LED lights for a trailer I have . The web site was clear and easy to navigate prices are fair and delivery was prompt. What more can I say? 591806



- STL190RB
by:

Review from a similar Optronics GloLight in Trailer Lights


It might be possible to give 5 stars but after purchasing all the products about a year ago, my little fiberglass trailer is not even close to being ready. All the lighting is hooked up and they all seem to work, so that's a good thing. The other products that I purchased have not been installed yet. I would like to mention how pleased I am with e-trailer videos showing everyone how their products look and how they're used. Keep it up, I am a happy customer. Vic 366257



- BUL111CB
by:

Review from a similar Optronics GloLight in Trailer Lights


Excellent product. Brightest reverse light I've seen. Installed on ranch hand bumper on 2012 f150. Customer service from etrailer was amazing! I was notified that my order may be delayed due to availability via phone and email. Was not delayed after all; was notified about the package being shipped days later and the rest is history. All over, I feel very happy with my purchase 238728



- STL178RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Quite frankly, these are one of the nicest LED taillights I've seen. The glow of the tail-lamp is very modern and it's very bright. These replaced old halogen square tail-lights on a 2005 toyhauler, and it helped freshen up the look of the rear. I had to drill a few holes in the metal plate these attached to, as the three wires must have a direct exit so that they don't get pinched. Initially, these flashed an error code on my 2018 Superduty when I tested the turn-signals, but when I tested them again, the error code went away. Be aware that swapping out halogens for LED's on a trailer may make your tow vehicle throw a turn-signal error. 538942



- STL117RB
by:

Review from a similar Optronics GloLight in Trailer Lights


Great set of lights, lots of complements...!! very happy and satisfied with this product...!! 100% recommended 187790


Comments

It is working excellent, no flickering at all. been expose to the whether and still looks new...!!Once again very satisfy with your product...!!Thank you Best regards...Braule

Braüle76 - 04/24/2016

17587
52
610
Show More Reviews

Ask the Experts about this Optronics Trailer Lights






  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Written by:
Tricia G
Video Edited:
Jacob T
Expert Research:
Adam R
Video by:
Kathleen M
Video by:
Dustin K
Photos by:
Jim W
Installed by:
Cole B
Photos by:
Amber A
Video Edited:
Chris R
Installed by:
Andrew S
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.