Is the TecNiq Seven Function Box Style Tail Light TN62XR a Replacement for a Wesbar 271594?

Updated 05/25/2026 | Published 05/21/2026

Products Featured in This Question

TecNiq Contoured Seven Function Box Style Tail Light - Passenger Side

(110)

$21.83

LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger

(268)

$38.81

LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 23 Diodes - Driver Side

(449)

$43.06

TecNiq Contoured Eight Function Box Style Tail Light - Drivers Side

(110)

$24.67

TecNiq 12" 3-Pole - 0.156" Bullet Harness w/ #6 Ground Lug - 90 Degree - 18-Ga Wire.

(12)

$7.07

Question:

Is this a plug and play replacement for the Wesbar 271594?

asked by: Paul

Expert Reply:

No, it is not plug and play Paul but it can be. The TecNiq Contoured Seven Function Box Style Tail Light item # TN62XR passenger side and item # TN42XR driver's side use a 3-Prong PL-3 Plug like item # TN47PV. These lights measure 7-1/2" long x 3-1/2" tall x 3" deep and are commonly used to replace the old discontinued Wesbar 271594 and 271595 lights. You could easily splice the item # TN47PV harness into your existing wiring to make this a plug and play connection.

The older Wesbar 271594 light uses a connection like the LED Trailer Tail Light item # STL36RB for the passenger side and item # STL37RB for the driver side. These are more commonly used as replacements.

The Wesbar lights are about 7" long x 3-3/4" tall x 3" deep. These Optronics lights are 7-7/8" long x 3-1/4" tall x 2-7/8" deep, so they are slightly longer than the old lights.

All of these lights are sealed in a waterproof housing so they are perfect for a boat trailer. I attached a some pictures below so you can see what I'm describing with the plugs and wiring.

What kind of trailer do you have?

You can add this information, along with any other questions you have, where it says Add Comment.