What to Know About the GloLight Thinline LED Trailer Clearance or Side Marker Light Video

You do have the wishbone trailer wiring setup. What that means is that if you have a solid brown wire it attaches to the brown and green wire as well as the brown and yellow wire. Yellow goes to left stop/turn, green goes to right stop/turn, and…

Kenda trailer tires are primarily made in China like most trailer tires. The only Radial trailer tires that I'm aware of that are made in the United States are the Goodyear Endurance line. Carlisle has a bias ply line of tires made in the States,…

For a waterproof LED light kit you would want to use #TLL9RK. I can verify that his kit is listed as waterproof which would include it being submersible. The #STL28RB & #STL29RB is comprised of lights not listed as submersible as you have said.

Thank you for the pictures! We do not have an exact replacement but we have something extremely close. It is the LED Trailer Fender Light item #PE89BR. This light measures 3-7/8" long x 1-1/4" tall x 7/8" deep. It is a dual-face LED…

The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…

Thanks for the picture! The Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal item #MCL48AB only comes with the light not the chrome colored bezel in your picture. The bezel is available to be purchased separately it is the Chrome…

The Yates keel pad, #YR1203SY, is pliable but still fairly rigid. It can bend some but if it needs to bend too much it might not stay secure. The ambient temperature also affects it. It is less pliable when cold. It also bends up at the ends a little…

The Blue #YR1203SB and Yellow #YR1203SY Yates Keel Pads are the only keel pads we carry. While they do have some play you may consider trimming some of the side material on the pads which will allow it flex a bit more.

It is a bit difficult to see in the picture, but there are mounting holes in the 4 tabs along the sides of the #YR1203SY keel pad. You would just need to screw through the tabs to the sides of the cross member. We do not offer any hardware…

There isn't really a lot of differences between the Hopkins 7-Way RV Style Connector with Molded Cable - 8' Long - RV Standard #H20046 and Hopkins 7-Way Blade Style Connector with Molded Cable - 8' Long - Auto Standard #HM20041. Both are…

Hello Jim, Great question! Because there is not a real standard to trailer suspension I do not have a direct answer for the spacing for the hangers to install the #e36FV. It all depends on what size shackle you are using, if the spring is over or…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…