Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2" Diameter. Waterproof, LED trailer light serves as a side marker or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 2-prong plug. P2 rated.
Features:
Specs:
This amber LED light serves as either a side marker light or a clearance light. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate light on your trailer - one as a front or rear clearance light and one as a side marker light.
This GloLight has a standard 2-prong plug as pictured above. A 2-prong pigtail with mating plug (A46PB or A49PB - sold separately) is required to connect this light to your vehicle or trailer. An optional mounting bracket is also available (BK5557GB - sold separately) to make it easier to mount the light on your trailer.
Recessed-mount trailer lights install underneath a housing or a grommet (A54GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brett Johnson: (silence)The Glolight is the stunning combination of premier lighting technology, meeting world-class style and capabilities. The introduction of the Glolight series represents the first truly different approach in years to the visual presentation of stop-tail-turn lamps.Most LED lamps have hotspots or patterns of bright light. Glolight lamps are visually distinctive from other LED lamps, because their lenses diffuse the light, giving them a smooth, bright, glowing appearance.The Glolight optical technology is so different, it's patentable. And Optronics has 35 new products with Glolight technology in its pipeline, right now. Mudd: Lighting is one of the most visibly predominant features on any vehicle, and this is a completely different looking yet highly effective light. We're focused on integrating the latest technology into our manufacturing process, and these new lights clearly represent the innovative partnership between Vanguard and Optronics.
Innovation is important to Vanguard, our customers, and our industry. Robert: Glolight technology looks different because it is different. Different in its optical approach and different all the way down to the circuit boards.We designed and manufactured all of our lamps using the most advanced engineering techniques, and test them in our own world-class, state-of-the-art optical testing facility. Lamps are engineered to resist everything, from shock, to dust, to high-velocity water spray. We're committed to designing and manufacturing erosion-resistant LED lighting products.
And Glolight lamps are produced using solid state, surface-mount device, or SMD, technology.Most LED lamps sold in the heavy duty market today, use what is typically referred to as "through hole" construction. Optronics LEDs are mounted directly to the surface of the circuit board, eliminating exposure to connecting points. LED lamps with SMD technology, like Optronics' new Glolight, are so robust that they can continue to function even if their circuit board is completely submerged in water. The unique Glolight lenses and housings are made of tough polycarbonate material that is sonically welded to create an impermeable seal. Glolight lamps meet all FMVSS 108 and SAE photometric requirements for visibility and safety.
And our lamps are tested at a certified, independent laboratory.I guess it's redundant to say this, but our lamps come with a lifetime warranty. Roush: There's nothing out there that's as eye-catching and effective as these Glolight lamps. Vanguard is always drawn to component supplier products that contribute to our customers' efforts to operate more effectively and safely. Glolight lamps just look different and more noticeable. And that means better safety.
Brett Johnson: With world-class manufacturing facilities, harness making capabilities, and a global market presence, Optronics is now changing the competitive landscape in HD lighting. We always have access to a lighting manufacturer with global sophistication, fleets are enjoying increased product availability, and everyone is befitting from new, innovative technology and the industry's most competitive pricing structure. With Glolight, Optronics is sending a signal that things have changed in the HD lighting industry.
Average Customer Rating: 4.8 out of 5 stars (1278 Customer Reviews)
2" Diameter. Waterproof, LED trailer light serves as a side marker or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 2-prong plug. P2 rated.Very disappointed with etrailer! Whoever packed this either does not care or is clueless in shipping. They used to small of a box. The light fixture was to big for the box, it actually bowed the box outward. It was doomed before it left etrailer. Plus I was shorted on another product that I ordered. VERY DISAPPOINTED!!
The light grommets and electrical connectors work great. etrailer, packs and ships,
whatever I have ordered, with care and I have not ever received a damaged item.
etailer does an excellent job and I look to them first for my trailer and truck parts and accessories.
Easy plug and play installation. Hopefully won't have to change again as long as I own the trailer.
The GloLight LED Trailer clearance light fit my trailer with no problems. I have purchased here before and it's always easy to get the correct part. The price is reasonable and I would recommend it as a very good replacement.
Fast service great parts
I have ordered several items from etrailer for both work and personal use. All items have been top quality and the service is excellent. I have also received a price match guarantee as well.
Everything worked as advertised. The light installed easily and is very bright. I'll order from eTrailer again.
Great look compared to the normal led markers I replaced
Item was of good quility, and set my trailer apart from others.
Had one that was inoperable and waiting to get a replacement.
Product was exactly as ordered and arrived quickly. I will order from them again as needed and i would recommend them to others. Thanks
After a year and them lights are still looking awesome
Delivery was quick and product well package as not to break.
Light was a perfect fit in place of my old unit.
FAST service. product arrived in good condition Thanks.
Super fast shipping. Haven’t installed yet.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan
4/14/2018
Still works and looks geat