Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.Features: This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer Specs: L44649 Bearing inner diameter: 1.063" L68149 Bearing inner diameter: 1.378" L44610 Race outer diameter: 1.980" L68111 Race outer diameter: 2.361" Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 3-1/8" diameter x 1" long Overall spindle length: 6-1/8" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately): Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 10-19 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU77FR 1,750 lbs 3.125" 1.719" 1.378" 1.063" 1.00" 1.00" Round - E-Z Lube and Brake Flange
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 4-1/4" long Overall spindle length: 9" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU74FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 4.25" Round - E-Z Lube and Brake Flange
Replacement #84spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-1/2" wide x 3-5/8" long Overall spindle length: 8-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU47FR 1,750 lbs 1.50" 1.719" 1.378" 1.063" 1.00" 3.625" Square
Replacement #84spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 6-1/2" long Overall spindle length: 11-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU84FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 6.50" Round
Hey Jim! A lot of axles on trailers like your 2022 Geo Pro 19FDS are technically custom axles but they almost always use standard parts. Your particular axle uses 4k hubs #K08-426-91 and Dexter Nev-R-Adjust Electric Trailer Brakes #K23-478-479. This…
The two Dexter hub and drums you mentioned do fit the same spindle as they use the same bearings and grease seal, but they have different capacities, and I verified with Dexter that the actual drum itself is different to compensate for the…
Hey Mitchell, there isn't a difference between the two hubs you mentioned. If the hub you had has an 8-246 on it like the part #K08-426-91 does the numbers and letters after that would not matter and the new hub will fit and work great as…
Hello Anthony, Thank you for all the information, most helpful! Based on our information, the single-axle Geo Pro 19FD with the Dexter axle labeled 3,900-lb uses a #84 spindle. For a bearing kit, you will want the Hub Bearing Kit for Lippert, Dexter,…
The correct hub/drum for a Dexter 4,000 Lb Axle is the Dexter Trailer Hub and Drum Assembly part #K08-426-91. Then for the brakes, you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-468-469. The hubs/drums for a 3,500 lb axle are…
Actually, there's a little more to it than that. The magnets on the #K23-478-479 are a little different, but the primary difference is the mounting bolt pattern. On a typical 3500 lb brake assembly, the mounting studs will all be 2-7/8 inches…
I sure can Mark and thanks for the information! The Dexter 3,900 lb torsion axles use the same bearings as 3,500 lb axles. Which means the correct replacement bearing kit is the item #BK2-100 you were looking at. You'll need one set per hub. Your…
While we don't have your exact axle in stock we have a great solution with the Timbren Axle Less kit part #ASR5200S01 as a great solution that's available now. This is a 5,200 lb axle setup that's similar to the torsion setups but…
We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…
After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…
In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…
To determine if the TruRyde Bearing Kit for #84 Spindle #BK2-100 will fit the spindles on your Dorsey boat trailer, you will want to confirm the bearings in your existing hub assembly. The bearing numbers should be stamped onto the bearings…
Replacement #84spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 3-1/2" diameter x 2-3/4" long Overall spindle length: 8-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU24FR 1,750 lbs 2.00" 3.37" 8.25" 1.72" 1.376" 1.062" Round
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 2-3/8" diameter x 3" long Spindle drop/rise: 4" Overall spindle length: 8-1/4" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately): Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 10-19 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU87FR 1,750 lbs 1.721" 1.376" 1.35" 1.063" 1.00" 1.234" Round - E-Z Lube and Brake Flange
Replacement #84spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 3-1/2" long Overall spindle length: 8-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU64FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 3.50" Round
Minimize grease leakage and maximize the life of your trailer's grease seals by switching to this smooth-operating system. The high-quality neoprene seals ride on consistently greased stainless steel rings for easy, free movement.By using this grease seal set along with your Bearing Buddy bearing protector, you can be sure that the seal and ring always have adequate grease for fluid operation. Note: If your axle spindles already have permanent, stainless steel surface rings, you do not need this spindle seal system. 60010 Bearing Buddy Spindle Seal Kit 10
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 3,500-lb #84spindles used with threaded Vortex setups. ... This hub is built specifically for 3,500-lb axles with #84spindles that originally used a threaded Vortex oil bath hub. Standard hubs will not fit that spindle correctly.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles E-Z Lube and standard grese caps, spindle attachment hardwdare, bearings, races, seal, and lug nuts are included E-Z Lube compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Pre-greased hub-and-drum is easy to install - no need to pack bearings Hub and drum are made in the USA Specs: Application: 3,500-lb trailer axles with #84spindles Wheel size: 13" to 15" Bolt pattern: 5 on 4-3/4" Grease cap flange diameter: 1.988" Wheel bolt dimensions: 1/2" diameter x 1-5/16" long Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles E-Z Lube and standard grease caps, spindle attachment hardware, bearings, races, seal, and lug nuts are included E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Hub is made in the USA Specs: Application: 3,500-lb E-Z Lube trailer axles with #84spindles Wheel size: 13" to 15" Bolt pattern: 5 on 5-1/2" Grease cap flange diameter: 1.99" Wheel bolt diameter: 1/2" Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Replacement #42 spindle welds onto your 5,200-lb to 7,000-lb trailer axle. Works with 25580 inner bearing and outer bearings with 1.25" inner diameter. ... Features: Straight spindle replaces a worn or damaged #42 spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 5,200-lb - 7,000-lb trailer axles Spindle capacity: 3,500 lbs Stub diameter: 2-1/4" x 6" long Overall spindle length: 11" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: varies depending on hub capacity (1.25" inner diameter) Races (sold separately) Inner race: 25520 Outer race: varies depending on outer bearing Grease seal (sold separately): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Part Number Capacity A B C D E F Round/Square TRU57FR 3,500 lbs 2.25" 2.25" 1.75" 1.25" 1.00" 6.00" Round
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, seal, grease cap, wheel bolts, and lug nuts included. ... Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Zinc plating has a 500-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 3,500-lb E-Z Lube trailer axles with #84spindles Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 2-1/4" long Weight capacity: 1,750 lbs Quantity: 1 hub and drum assembly Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 10-19 Inner diameter: 1.719" Outer diameter: 2.565" Corrosion Resistance for Marine Use This trailer hub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer.
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Pre-greased idler hub is easy to install - no need to pack bearings Sturdy iron construction Hub and drum are made in the USA Specs: Application: 3,500-lb E-Z Lube trailer axles with #84spindles Wheel size: 14-1/2" to 16-1/2" Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 1.99" Wheel bolt diameter: 1/2" Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
This hub-and-drum assembly fits 3,500-lb axles with #84spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Filters
