bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 6 on 5-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
  9. 16-1/2 Inch Wheel
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased

Item # AKIHUB-655-35-EZ-K
Our Price: $56.12
Trailer Hubs and Drums
Shipping Weight: 9 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased part number AKIHUB-655-35-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (43)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-35-EZ-K

  • 6 on 5-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • Easy Grease
  • EZ Lube
  • Pre-Greased
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 14-1/2" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KH-749-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased

Compare to Dexter 84655UC1-EZ





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-35-EZ-K

Average Customer Rating:  4.9 out of 5 stars   (43 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

by:

I used these to replace odd-ball 5 on 5.5 hubs. I hate that bolt pattern. So hard to find good rims because hardly anyone uses them. In fact, I did this swap shortly after buying the trailer (read, tires and wheels were still in new condition). The dealer I bought them from was reluctant to give me much money for them. He told me that even he would have a hard time selling them because they were such an odd-ball bolt pattern. As he said this, I'm looking around at his lot of trailers, ALL with hubs with this same bolt patter. Ugh!

I wanted to upgrade the rims on my trailer, and upgrade the tires. So, went with this pattern (on two trailers). Quality product. Would def. buy again.



by:

Everything I ordered was correct. They kept me updated on the back order items suggested an alternative when the hubs gots delayed a second time. Went together great. Hoping this is the last axle and hubs I put on the trailer.



by:

Could not have asked for anything better bearing being pressed in just a simple of installation as you could ask for I will always go back to etrailer.com for all my trailer needs



by:

Perfect replacement for the 16 yr old original hubs. Had both replaced in 15 minutes.



by:

Great product and qualified service customers and delivery. Thank you



by:

There's not much to say. It's a trailer hub. There are plenty of things to say about the customer service, which was great when I called in to make my order and make sure I was ordering to right part. The time of arrival at my doorstep was very quick. I thought I was going to have to order and forget about it until it arrived but not with e trailer; the order arrived within a few days. It was well packaged too.

David C.

2/25/2018

These hubs work great. I got them because I wanted my trailer bolt pattern to match my Toyota Tacoma. It has worked out great so far.



by:

So on the last trailer I converted to hydraulic disc, I used the Titan kit with actuator. This trailer is a cargo trailer for work 14'X8' and not that heavy. I went with Kodiak discs and the Hydrastar actuator. I mounted it inside the trailer to protect it and keep it out of sight. It's so quiet but works flawlessly! Even with the door open, it's tough to hear, so for bleeding, I set up a remote switch to activate the system. It doesn't leak, has plenty of power, and is very smooth coupled with my factory Ford brake controller.. It's been a year, so long time reliability is a wait and see, but so far, I'm very happy.



by:

Excellent timing and customer service



by:

It was the wrong ones. Other than having to buy spindles to fit and waiting STILL for machine shop to weld it, perfect, just perfect. Over a year and still can't use it.



by:

Excellent! Used these to convert from worn 4 bolt hubs with 15 inch tires to larger, higher weight capcity 16 inch commercial Transit van tires. Just towed a scrap auto to the recycler. Its like having a new trailer. Highly reccomended!+++



by:

Purchased several items from you, very happy with service and pricing! Wouldn’t have been able to build our off road camper with your help!



by:

I was needing bearing, but wanted to change hubs to better style (from Mercedes style to regular stud style). It was only a little extra to do the whole hub. The pre-greased already put together hubs took about 10 mins per hub to change. Most of that was cleaning spindles for install. I really like this option. Super easy, quick fix.



by:

Loved the personal service and the help. I tried a few other sources before going online to order from etrailer. One place I tried was an online tool dealer, and their online site was a mess without help and so was a retail location. etrailer, was quick to find me exactly what I needed and got me fixed up in just a few minutes. From now on all my trailer needs will be fulfilled from etrailer!!!



by:

They were a perfect fit to my timberland Axle-less system. A simple stud change and I was able to bolt up stock Toyota wheels to my new trailer.



by:

They came pre packed with grease and fit perfectly! Wow one of the easiest replacements I've used



by:

Items were shipped promptly and arrived on time in good condition. Well packaged. Good quality products that will be a new utility trailer axle for me within the next week.



by:

PRODUCT IS EXCELLENT QUALITY, EXACTLY WHAT I ORDERED AND NEEDED. SERVICE WAS FAST AND ALLOWED ME TO GET MY TRAILER BACK ON THE ROAD.
I WILL HIGHLY RECOMMEND ETRAILER.COM



by:

Look good so far haven't installed them yet but will update when they are done. Shipping has always been great, normally delivered this and my previous orders on time. Will be purchasing my future trailer needs again from your company.



by:

As always, etrailer had the parts I needed, got them to me ahead of time expected, and the order was correct. Great job!



by:

Great customer service. Fast shipping, detailed tracking, and the product was exactly as described.



by:

Very happy with the product! Fast shipping and worked perfect. What impressed me the most though, was that they emailed me a year later
To make sure I was happy with the product. Absolutely will use them again. It’s hard to find good service like this anymore these days. Very impressed.



by:

Appears to be a good items, installed e asily



by:

Perfect! Instant install, pregreased and good quality for a great price!



by:

Thanks everything worked Great and still is!!!!



by:

Exactly what i needed. And ordered was shipped, packed, and delivered in great shape.


25
43
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • What Is The Hub Pilot Diameter Of The Trailer Idler Hub Assembly AKIHUB-655-35-EZ-K?
    I would be happy to help! On the Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K you were looking at the hub pilot has a 3" O.D. as shown in the included diagram. You will need to make sure the pilot hole in your wheel is larger that 3" for this to work properly. If there is a different hub you need this measurement from please just let me know. I included a video of the # AKIHUB-655-35-EZ-K for you to take a look at.
    view full answer...
    Image 1 for
  • Can Dexter 6 Lug Hub/Drum be Replaced with Standard Hub
    Yes, there are hubs that can replace your Dexter hub/drums that you have currently. If the axle is rated for 6,000 or 5,200 lb you would want the hub part # AKIHUB-655-6-EZ-K or if it's rated for 3,500 lb you'd want the # AKIHUB-655-35-EZ-K.
    view full answer...
  • Is Idler Hub With 6 on 5-1/2 Inch Bolt Pattern Available for 3500 lb Axle
    If your existing axle does indeed have a 3500 lb capacity, the # AKIHUB-655-35-EZ-K idler hub which has a 6 on 5-1/2 inch bolt pattern. You can confirm whether you have a 3500 lb axle by pulling one of the hubs, removing the inner and outer wheel bearing and examining the sides of the cages that hold the roller bearings. There will be a reference number engraved on the side of the bearing cages. If the numbers read L68149 on the larger inner bearing and L44649 on the smaller outer bearing,...
    view full answer...
  • Upgrading to 6 Lug Hubs on Dexter 3,700 Lb Axle
    The Dexter 3,700 Lb Axle uses an L68149 inner bearing and a L44649 outer bearing so yes, you can get these bearings with a 6 on 5-1/2" bolt pattern. I am not sure if you're after a hub or hub/drum so I have attached our complete selection below. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-655-35-EZ-K for example is a great option if you need an idler hub or the Easy Grease Trailer Hub and Drum Assembly part # AKHD-655-35-EZ-K if you need a hub/drum. These both have a 6 on 5-1/2"...
    view full answer...
  • Idler Hub To Replace Drum Brakes On Tandem Axle Trailer With 3,500LB Axles
    First you will need to check with the local laws where you plan on using the trailer as some areas require both axles on a tandem trailer to have brakes. If you can operate with brakes only on one axle then you can switch to an idler hub assembly but be sure to match your correct bolt pattern. 5 On 4-1/2" # AKIHUB-545-35-EZ-K 5 On 4-3/4" # AKIHUB-5475-35-EZ-K 5 On 5" # AKIHUB-550-35-EZ-K 5 On 5-1/2" # AKIHUB-555-35-EZ-K 6 On 5-1/2" # AKIHUB-655-35-EZ-K
    view full answer...
  • How to Determine Hub
    That's not enough information to find the hub, and in particular the spindle, as you have to be much, much more specific. To find the right hub, you need to know your bearing numbers and axle capacity. To find this you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper measure your spindle to the...
    view full answer...
    Image 1 for
  • Replacement Trailer Hubs Using L68149 and L44649 Bearings
    It sounds like you have inner and outer bearings # L68149 and # L44649 respectively. That's a very popular combination on a # 84 spindle but the seals are normally 1.719 inches inner diameter. I would verify that number. If this is correct there's a still a number of options that could be your correct hubs depending on whether you have drums, what bolt pattern they are, and whether you have EZ Lube spindles or not. I'll list all the optoins for you. 5 on 4-1/2 bolt pattern: Standard...
    view full answer...
  • Inner Hub Diameters To Fit Old Trailer Axle
    On the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K, the inside dimensions of the hub is based on the bearings and races. If you are looking for the inner diameter of the bearings and grease seal to ensure a fit on your spindle, here are the dimensions: Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" which is equal to hub bore The...
    view full answer...
    Image 1 for
  • What Grease Comes In Trailer Idler Hub Assembly
    The Trailer Idler Hub Assemblies like part # AKIHUB-655-35-EZ-K comes with a lithium complex based (NGLI #2) grease which is very common. We do carry this in a 14 oz. tube, the LubriMatic LMX Industrial Strength Grease part # L11390 but it's red not green. We don't carry the green grease but they can be mixed without issue.
    view full answer...
  • Replacement 3,500LB Spindle and Idler Hubs For Obsolete Trailer Spindle 1.375" Inner, 0.75" Outer
    You are going to need to install 2 new Spindles # TRU74FR as your spindles are obsolete. These new spindles are the size commonly used on 3,500lb axles. It will allow you to use one of the idler hubs below depending on what bolt pattern your wheels are. 5 on 4-1/2" # AKIHUB-545-35-EZ-K 5 on 4-3/4" # AKIHUB-5475-35-EZ-K 5 on 5" # AKIHUB-550-35-EZ-K 5 on 5-1/2" # AKIHUB-555-35-EZ-K 6 on 5-1/2" # AKIHUB-655-35-EZ-K
    view full answer...
  • Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
    We will have several different pre packed hub assemblies for you to choose from depending on if you need a hub for drum brakes or hubs for an idler axle. Here is a list of hubs for both drum and idler axles in the different bolt patterns that use the Outer Bearing # L44649 and Inner Bearing # L68149. All the kits include both a solid grease cap and one with a removable insert for easy grease spindles. Easy Grease Trailer Hub and Drum Assembly, 5 on 4-1/2" # AKHD-545-35-EZ-K Easy Grease...
    view full answer...
  • Replacement Idler Hub Needed for 3500 Pound Axle with 6 on 5-1/2 Bolt Pattern
    If you are positive that your bearings have the same L68149 (1.378" inner diameter) inner bearing and the L44649 (1.063" inner diameter) outer bearing as the #84 EZ Lube Spindle # TRU77FR, we have what you need! You have a 3,500 pound capacity axle with idler hubs (thanks for the photos!) For the hubs, I recommend the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. This comes with the same 6 on 5-1/2 pattern that you need. This is for a non-braking...
    view full answer...
    Image 1 for Image 2 for
  • What is the Thread Pitch Of The Lug Nuts On The etrailer.com AKIHUB-655-35-EZ-K Hubs
    The lugs on the etrailer.com Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-35-EZ-K will indeed be 1/2"-20. This will be the standard used on 1/2" studs on trailer hubs. If you were also looking to lock your wheels to the # AKIHUB-655-35-EZ-K, the Redline Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 will fit right on and includes 1 key and 2 locks.
    view full answer...
  • Recommended Hub and Drum Assembly with 6 on 5-1/2 Bolt Pattern for 2-132, 3,500 Pound Axle
    The etrailer.com Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K referenced in your question is the correct replacement for the idler hub # AKIHUB-655-35-EZ-K. The Hub and Drum Assembly has a 6 on 5-1/2 bolt pattern and is designed for 3,500 pound E-Z Lube trailer axles with #84 spindles. An idler hub and a hub and drum assembly are both going to mount onto the spindle the same way. There will not be any difference in the location, either further out or in, of where the wheel will mount...
    view full answer...
  • Can Timbren Heavy-Duty Axle-Less Trailer Suspension Work With Regular Tires
    Even though the Timbren Heavy-Duty Axle-Less Trailer Suspension, part # ASR35HDS01 says it is for off-road tires(they are usually wider), it will still perform extremely well with regular tires as well. This system is designed with EZ-Lube spindles and has a weight capacity of 3,500-lbs. It does not come with hubs so if you need an idler hub that will work I recommend part # AKIHUB-655-35-EZ-K. If you are interested in a hub and drum that you can use with brakes I recommend part # AKHD-655-35-EZ-K....
    view full answer...
  • What Hubs Do I Need To Work With The Timbren Axle-Less Suspension System # ASR1THDS01?
    The Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K is the correct fit for the Timbren Axle-Less Trailer Suspension System # ASR1THDS01. It has the E-Z lube cap and the 6 on 5.5" lug pattern. If you are in need of a braking axle the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K is the hub you will need. You can pair this with the Electric Trailer Brake Kit # AKEBRK-35-SA for self adjusting drum brakes.
    view full answer...
  • Idler Hubs Compatible With Timbren Axle-Less Trailer Suspension # ASR2KHDS03
    The Timbren Axle-Less Trailer Suspension # ASR2KHDS03 uses the larger #84 size spindle which is commonly found on 3,500lb axles. I recommend using either the 5 on 4-1/2" Hub # AKIHUB-545-35-EZ-K or the 6 on 5-1/2" Hub # AKIHUB-655-35-EZ-K. Since the Timbren is capable of being used with up to a 235/85R16 # AM35010 wheel and tire you may need the larger bolt pattern.
    view full answer...
  • Replacement Trailer Hub for Dexter 8-248 Hub
    The Dexter 8-248 is for a 3,500 lb axle and uses the # L68149 inner and # L44649 outer bearings. To replace this you need one of the following depending on your bolt pattern: - 5 on 4-1/2" Bolt Pattern # AKIHUB-545-35-EZ-K - 6 on 5-1/2" Bolt Pattern # AKIHUB-655-35-EZ-K I've attached an installation video for you to check out as well.
    view full answer...
  • Idler Hub So That I Can Use 5x5.5 Bolt Pattern Jeep Wheels on My Off-Road Trailer
    The lug studs on the Trailer Idler Hub Assembly # AKIHUB-555-35-K are 1/2" studs, which should match the studs used on your Jeep wheels. From what it sounds like, you're trying to replace the hubs on a trailer to use the wheels from a Jeep? While the studs may match up, the wheel offset is going to potentially cause a problem. You'll need to make sure you have enough space between the hub face and the frame to use the negative offset that vehicle wheels come with. You might be best served...
    view full answer...
  • Replacement Hubs With 6 on 5-1/2 Bolt Pattern for Off-Road Trailer With 3,500 Pound Axle
    Assuming that is actually a 3,500 lb axle, and you need a 6 on 5-1/2 bolt pattern, you can use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K. You will need to verify this information to make sure it is correct. I would start by checking the axle tag to see if it is listed. If not, pull the current hubs and check the bearings. Your standard 3,500 lb axle uses # L68149 inner and # L44649 outer bearings. I have attached an installation video below, along with a helpful article...
    view full answer...
  • Availability of Hub With 6 on 5-1/2 Bolt Patter for 2k or 3.5k Axle
    There are hubs that have a 6 on 5-1/2 bolt patter that will fit a 3,500 lb axle. You won't find any for a 2k axle. The Trailer Hub and Drum Assembly # AKHD-655-35-K and Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K both have a 6 on 5-1/2 bolt pattern. For brakes you can use the # AKEBRK-35-SA. If you only want idler hubs you would use the # AKIHUB-655-35-K or # AKIHUB-655-35-EZ-K instead. All of these hubs use # L68149 inner and # L44649 outer bearings commonly found on...
    view full answer...
  • Availability Of 6 on 5-1/2 Idler Hub With LM67048 And L68149 Bearings
    There is one hub that we carry that uses the LM67048 outer and L68149 Inner bearing. This is a hub and drum assembly # 8-407-5UC3-EZ. The only problem is the seal that comes with this is a 10-19 seal which has an inner diameter of 1.719". So this would not effectively seal your spindle. We would also have to put electric brakes on the axle in order to use that hub. This bearing combination is very uncommon these days. It may prove very difficult to find compatible hubs. At this point...
    view full answer...
  • Recommended Timbren Axle-Less System for 6 on 5-1/2 inch Hubs
    Yes, I would be happy to. The Timbren Axle-Less Trailer Suspension item # ASR3500S05 uses inner bearing item # L68149 and outer bearing item # L44649. To add an idler hub or brake drum assemblies with a 6 on 5-1/2 lug pattern you will need the following parts: Idler Hub - Easy Grease Trailer Idler Hub Assembly item # AKIHUB-655-35-EZ-K Hub and Drum Assembly - Easy Grease Trailer Hub and Drum Assembly item # AKHD-655-35-EZ-K These are rated for 3,500 lbs axles and are sold individually....
    view full answer...
  • Axle Replacement on 4x6 Trailer for 6 Bolt Hub Compatibility
    The only axle option we have for a 4x6 foot trailer to get you the bolt pattern you desire is the Universal Fit Timbren Axle-Less Suspension System. This will not have springs, but will instead use Aeon Rubber suspension that is integrated in the assemblies. Then if you don't have a cross brace in the axle location you will need to use a 2 inch square tube (not included) in the integrated holes of the assemblies. I recommend the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.