What Brakes and Bearing Kit do I Need for My Geo Pro 19FD with the Dexter Axle Labeled 3,900-lb?
Updated 09/29/2025 | Published 09/09/2025
Products Featured in This Question
Question:
I have a Geo Pro RV 19FD,with a Dexter axle 9798179 DUE: 2021-06-29 ORD:61054713-3 S/N 601577796 Capacity : 3900 Trying to find part numbers for seals,bearing,brake shoes or backing plate with brakes and magnets. Tried Dexter with no feed back would appreciate some help thank you. Don’t want to take apart to check bearings and seals and not have repair parts on hand.Thanks again.
asked by: Anthony G
Expert Reply:
Hello Anthony,
Thank you for all the information, most helpful!
Based on our information, the single-axle Geo Pro 19FD with the Dexter axle labeled 3,900-lb uses a # 84 spindle.
For a bearing kit, you will want the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100. The # BK2-100 includes new bearings, races, grease seal, tang washer, and even a cotter pin, everything you’ll need in one kit. If you don’t have some grease already, make sure you grab some LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can # L11380.
If you’d prefer to stick with Dexter, you’ll want the # 23-468-469. Or, you can save a couple of bucks and still have great brakes with our etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K # AKEBRK-35-SA.
What kind of adventure are you gearing up for? Where are you going, what are you going to see?
(click to enlarge)
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter hub assembly
- Search Results: dexter trailer hubs and drums
- Search Results: 84 spindle hub
- Q&A: Replacement Brakes for 2022 Geo Pro 19FDS
- Shop: Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles
- Q&A: Are Dexter Hub and Drum 84546UC3-EZ & K08-426-91 The Same
- Q&A: Replacement Trailer Hub/Drum to Replace Dexter Marked with 8-246
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Replacement Hubs/Drums and Brakes for a Dexter 4,000 Lb Axle
- Q&A: Difference Between Dexter 3500 lb and 4400 lb Brake Assemblies
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Recommended Bearing Kit for a Dexter 3,900 lbs Torsion Axle
- Q&A: Replacement Axle Solution for 2020 Rockwood Geo Pro G19BH
Kate F.
9/29/2025
Hey Anthony, Did you find the parts you needed for your Geo Pro RV? I'm curious to know if the suggested bearing kit and brakes worked out for you, as it could help others in a similar situation.