How to Find Correct Bearings for 2000 Dorsey Boat Trailer
Updated 05/08/2017 | Published 05/05/2017
Products Featured in This Question
Question:
Hi...will these fit a Yr 2000 Dorsey Boat Trailer?
asked by: Craig C
Expert Reply:
To determine if the TruRyde Bearing Kit for #84 Spindle # BK2-100 will fit the spindles on your Dorsey boat trailer, you will want to confirm the bearings in your existing hub assembly. The bearing numbers should be stamped onto the bearings themselves. If you cannot locate them, then you can also measure the trailer spindle at various locations. I have attached an image that shows what measurements are needed. I recommend using a digital caliper like # PTW80157, as the measurements will need to be exact.
This Bearing Kit has a # L44649 outer bearing, # L44610 outer race, # L68149 inner bearing and # L68111 inner race. It is designed for #84 spindles on a 3,500 pound axle.
I have also attached a couple of articles on trailer bearings and hub assemblies that you may find helpful.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ad2527e grease seal
- Shop: Dexter DX7.5L A-60XL Surge Brake Actuator w Electric Lockout - Disc - 2" Ball - Primed - 7.5K
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: grease seal 58846
- Search Results: boat trailer brakes
- Search Results: axle brake flange
- Search Results: hydraulic brake lines
- Search Results: 84 spindle hub
- Search Results: 84 spindle bearing kit
- Shop: Dexter Hydraulic Trailer Brakes - Free-Backing - 10" - Left/Right - 3.5K
- Shop: Replacement Black Plastic Filler Cap for Dexter 7,500-lb Brake Actuators
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX47FR
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Grease Seal
- Q&A: What is Difference Between Kodaguard and Dacromet Coated 3,500 lb Kodiak Disc Brake Kits
- Video: DeeMaxx Disc Brake Kit Spec Review
- Video: All About the DeeMaxx Disc Brake Kit
- Video: Feature Review Kodiak Disc Brakes
- Q&A: Replacement Bearing Kit and Brakes for a 2003 Boat Trailer with 3,500 lb Axles
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Correct Replacement Brakes for Dorsey Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Article: How to Measure Your Trailer Wheel Bolt Pattern