Flat tow brake systems stop working right when power drops. This direct-wire 12V outlet connects to your towed vehicles battery so your braking system stays powered and ready every time you tow.Specs Electrical Voltage: 12V Fuse rating: 15 amps Dimensions Wire length: 120" Connections Connector type: 12V power outlet socket Wire gauge: 14 AWG two-wire Included Components 12V outlet socket Wiring harness In-line fuse holder ATC blade fuse Connectors Shrink tube Mounting screws Warranty 3-Year limited
Connect this isolator in-line with 2 batteries - 1 that is charged by your alternator and another that connects to an outside source - and it will transfer power in either direction to keep both batteries charged. Shuts off if battery drops to 12.7V.Features: Dual-sensing battery isolator connects in-line with 2 batteries and transfers power in either direction Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Pulls power from auxiliary battery that is connected to outside power source to charge start battery Isolator function stops power transfer from the charging battery if its voltage drops too low Prevents excessive discharge and dead battery Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Durable housing protects sensitive electronics Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 8-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 100 amps Standby current: less than 5 mA Output connection: 12V DC Overall dimensions: 3-1/8" long x 2-15/16" wide x 2-1/2" tall 2-Year warranty This dual-sensing battery isolator can transfer charge from either your start battery or your auxiliary battery to keep both batteries in your setup charged.
This 100-amp dual-battery isolator pulls power from your start battery to charge your auxiliary battery. Isolator switches off to prevent dead battery if start battery voltage drops too low. Compact design for versatile mounting.Features: Battery isolator protects start battery from auxiliary drain in multiple battery setups Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Stops charge transfer if start battery voltage drops too low, preventing excessive discharge Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 8-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 100 amps Standby current: less than 5 mA Output connection: 12V DC Overall dimensions: 3-1/8" long x 2-15/16" wide x 2-1/2" tall 2-Year warranty With this dual-battery isolator, you can transfer power from your start battery to an auxiliary battery without draining your start battery.
This 200-amp dual-battery isolator pulls power from your start battery to charge your auxiliary battery. Isolator switches off to prevent dead battery if start battery voltage drops too low. Compact design for versatile mounting.Features: Battery isolator protects start battery from auxiliary drain in multiple battery setups Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Stops charge transfer if start battery voltage drops too low, preventing excessive discharge Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 4-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 200 amps Standby current: less than 5 mA Output connection: 12V DC Overall dimensions: 3-15/16" long x 3-3/4" wide x 3-1/2" tall 2-Year warranty With this dual-battery isolator, you can transfer power from your start battery to an auxiliary battery without draining your start battery.
Connect this isolator in-line with 2 batteries - 1 that is charged by your alternator and another that connects to an outside source - and it will transfer power in either direction to keep both batteries charged. Shuts off if battery drops to 12.7V.Features: Dual-sensing battery isolator connects in-line with 2 batteries and transfers power in either direction Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Pulls power from auxiliary battery that is connected to outside power source to charge start battery Isolator function stops power transfer from the charging battery if its voltage drops too low Prevents excessive discharge and dead battery Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Durable housing protects sensitive electronics Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 4-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 200 amps Standby current: less than 5 mA Output connection: 12V DC Overall dimensions: 3-15/16" long x 3-3/4" wide x 3-1/2" tall 2-Year warranty This dual-sensing battery isolator can transfer charge from either your start battery or your auxiliary battery to keep both batteries in your setup charged.
Adapts 7-way trailer connector at the rear of the vehicle to a 12V plug Add a power inverter (sold separately) to adapt for 110V AC accessories Tin-plated copper terminal pins Provides access to power for TVs, electric coolers, portable work lights or 12V power tools
Add (2) 12-volt outlets to your ride with this SAE plug-and-play adapter. Simplifies connection of auxiliary equipment like GPS, mobile phones, handlebar heaters, and heated clothing. ... Features: This y-splitter cable connects your SAE battery lead or SAE outlet to (2) 12-volt sockets Powers accessories such as GPS, phone, or USB chargers Locking sockets keep accessories in place Includes weatherproof socket caps and SAE rubber seal Specs: Input: SAE connector Output: (2) 12-volt Cord length: 12" Gauge: 16 3-Year limited warranty Note: Requires an SAE battery lead or an SAE outlet to operate (sold separately)
Connect this isolator in-line with 2 batteries - 1 that is charged by your alternator and another that connects to an outside source - and it will transfer power in either direction to keep both batteries charged. Shuts off if battery drops to 12.7V.Features: Dual-sensing battery isolator connects in-line with 2 batteries and transfers power in either direction Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Pulls power from auxiliary battery that is connected to outside power source to charge start battery Isolator function stops power transfer from the charging battery if its voltage drops too low Prevents excessive discharge and dead battery Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Durable housing protects sensitive electronics Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 6-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 100 amps Standby current: less than 5 mA Output connection: 24V DC Overall dimensions: 3-1/8" long x 2-15/16" wide x 2-1/2" tall 2-Year warranty This dual-sensing battery isolator can transfer charge from either your start battery or your auxiliary battery to keep both batteries in your setup charged.
Connect this isolator in-line with 2 batteries - 1 that is charged by your alternator and another that connects to an outside source - and it will transfer power in either direction to keep both batteries charged. Shuts off if battery drops to 12.7V.Features: Dual-sensing battery isolator connects in-line with 2 batteries and transfers power in either direction Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Pulls power from auxiliary battery that is connected to outside power source to charge start battery Isolator function stops power transfer from the charging battery if its voltage drops too low Prevents excessive discharge and dead battery Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Durable housing protects sensitive electronics Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery 3-Gauge cables, fuses, and connectors sold separately Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 200 amps Standby current: less than 5 mA Output connection: 24V DC Overall dimensions: 3-15/16" long x 3-3/4" wide x 3-1/2" tall 2-Year warranty This dual-sensing battery isolator can transfer charge from either your start battery or your auxiliary battery to keep both batteries in your setup charged.
Don't be kept in the dark about the status of your battery's charge! CTEK's Comfort Indicator lights up w/ all the information you need to keep your battery healthy and fully charged.Features: Works w/ all CTEK 12V Comfort Connect chargers Easy-to-use system allows you to plug in charger without first removing indicator Allows quick-glance access to your vehicle's battery-charge level Battery to be tested must have had at least one hour to rest after driving or charging in order to display properly Simple, traffic-light-style display demystifies charging "mumbo jumbo" Green: Battery is in good condition and does not need to be charged Yellow: Battery should be charged to avoid damaging stratification Red: Battery needs charging to enable restart Equips you w/ the information you need to prolong the life of your battery Properly charged batteries last longer - saving you time and money Specs: Application: all CTEK 12V Comfort Connect chargers Chargers that have the orange oval connector Model: 56-382 Eyelet-terminal size: 8.4 mm Battery cable fuse: 15A Battery cable length: 16" Includes 1 battery-indicator cable w/ 8.4-mm eyelet terminals 5-Year warranty CTEK Comfort Indicator wiring cables plug together w/ any Comfort Connect end plug and are compatible w/ CTEK Comfort Connect 12V chargers.
Add a 12-volt outlet to your ride with this SAE plug-and-play adapter. Simplifies connection of auxiliary equipment like GPS, mobile phones, handlebar heaters, and heated clothing. ... Features: This SAE to 12-volt socket cable helps you add an auxiliary 12-volt port to your ride Plugs into an existing SAE battery lead (sold separately) Internal locking mechanism keeps your accessory secure while riding Attaches to handlebar, fairing, or dash Specs: Input: 2-pole SAE Output: 12-volt, 21 mm socket Cord length: 20" 3-Year limited warranty Note: Requires an SAE battery lead or an SAE outlet to operate (sold separately)
Rechargeable, commercial jump starter quickly revives semis, construction equipment, and trucks up to 400 times off a single charge. Multi-function design with digital voltmeter, LED work light, and charging ports for 12V and USB devices.Features: Portable lithium-ion jump starter revives dead 12-volt and 24-volt vehicle and equipment batteries Perfect for gas or diesel trucks, semis, RVs, buses, and construction equipment Powerful lithium-ion battery provides up to 400 jump starts off a single charge Holds charge for over a year with minimal power loss Fully recharges in under 8 hours from a 12V AC or DC power source Digital voltmeter displays battery voltage to help determine if the battery is discharged Rechargeable LED work light has multiple modes, including emergency strobe and SOS 12V plug powers accessories like a tire inflator, power inverter, fan, cooler, or coffee maker 2 USB ports let you charge smartphones, tablets, headphones, or portable speakers Removable, heavy-duty battery clamps are spark-proof and have reverse polarity protection Cam-lock cable connectors won't slip or disconnect when cables are pulled Simple operation with LED-lit buttons and indicators Manual override button allows you to jump a battery with a charge below 2-volts Compact, lightweight design - stores in a cargo area or toolbox Includes jump starter, Boost Max battery clamps, 12V accessory cord, and carrying case Specs: Application: 12-volt and 24-volt lead-acid battery systems Battery types supported: wet cell, gel cell, maintenance-free, enhanced flooded, and AGM Engine size compatibility: Gas and diesel engines: up to Class 8+/CE Starting current: 6,250 amps Internal battery: 266 watt-hour lithium-ion USB output: 2.1 amps Battery clamp span: 24" long LED worklight light output: 2,200 lumens IP rating (with ports closed): IP65 Operating Temperature: -22 F to 122 F Dimensions: 12-1/4" long x 8-3/16" wide x 6-3/8" deep Weight: 19.25 lbs 1-Year limited warranty The NOCO GB500 Boost Max jump starter provides commercial grade performance in a compact and portable design.
This powerful, all-weather eight-step charger uses a patented, pulse-maintenance system to charge, maintain and help recondition 12V batteries. Backup power supply allows you to change vehicle batteries without losing complicated program settings.
This kit is designed to bring an additional 12volt power source protected by a 20 amp fuse. This will help protect your towed vehicle's electrical system.
This 100-amp dual-battery isolator pulls power from your start battery to charge your auxiliary battery. Isolator switches off to prevent dead battery if start battery voltage drops too low. Compact design for versatile mounting. Wiring included.
Keep backseat passengers warm and cozy with this compact, 300-watt heater. Bolt the unit to the floor of your Jeep or other off-road vehicle and wire it into any 12V power source, and it will radiate heat throughout your vehicle.Features: Backseat heater provides extra warmth for your Jeep or other off-road vehicle 300-Watt unit radiates heat quickly and efficiently Easy-to-access toggle switch lets you turn heater on and off Integrated swivel mount allows you to adjust position of unit Simple, universal installation Wires into any 12V power source Bolts securely to vehicle's floor with pre-drilled mounting bracket Specs: Dimensions: 8" tall x 7" wide x 6" deep Power draw: 12volts Current draw: 25 amps Wattage: 300 watts Limited 1-year warranty
Designed for use with LiFePO4 batteries, this load disconnect isolator connects to your Redarc Manager30 battery management system or BCDC battery charger to protect your auxiliary battery from excessive discharge. Voltage spike protection built in.
This powerful, all-weather, 6-step charger uses a patented pulse-maintenance system to charge and maintain 12V batteries. Designed to charge small batteries like those for motorcycles, snowmobiles, yard maintenance machines and trailer breakaway kits.Features: 6-Step fully automatic system constantly monitors and maintains 12V battery charge Performs reliably and is virtually maintenance free Won't overcharge or undercharge like typical trickle chargers Switches automatically to pulse-maintenance phase when full charge has been reached Reduces risk of overheating, sulfation and premature battery failure Easy-to-use, quick-disconnect system features Comfort Connect end plugs - charger plugs right in Eyelet-terminal cable permanently attaches to battery terminals Clamp-terminal cable temporarily clamps to battery terminals Safe, versatile design Approved for indoor and outdoor use Prevents reverse-polarity mistakes Convenient accessories (sold separately) provide additional security and convenience LED indicator battery cable lets you monitor your battery's charge at a glance Additional battery-hookup cables simplify charging multiple vehicles Includes 12V battery charger, 1 set of 16" battery cables with battery-terminal clips, 1 set of 16" battery cables with M6 (6.4-mm) eyelet terminals, owner's manual and protective case Specs: Application: most starter and deep-cycle, 12V lead-acid batteries Includes wet, MF , AGM and most gel batteries Charges batteries with capacities from 1.2 Ah to 32 Ah Maintains batteries with capacities up to 100 Ah Charge cycle: 6-step, fully automatic charger with pulse maintenance Input voltage: 110 V AC - 120V AC Charging voltage: 14.4V Charging current: 0.8A Dimensions: 5-1/2" long x 2" wide x 1-1/2" tall 5-Year warranty This CTEK charger comes with two battery cables: one with clamp terminals and one with eyelet terminals.
Features: Unique oscillating pattern covers both high and low zones Convienent 12-volt adapter plug with 6' cord Includes clamp and plate for permanent mounting W1658 Performance Tool 6" Oscillating Fan 12-Volt - Clamp-On
Easy-to-use mini inflator fills a standard automotive tire in about 10 minutes. Perfect for topping off car tires and filling up sports equipment. Small size is perfect for transporting and storing out of the way.Features: Miniature tire inflator fills standard tires in approximately 10 minutes Ideal for topping off your tires and filling various inflatables Compact size for easy storage Plugs into your 12-volt accessory outlet Specs: Output pressure: 45 psi Voltage: 12volts Hose length: 4" Power cord length: 9' Mini inflator dimensions: 4-3/4" long x 3-3/4" wide x 2-1/4" tall The compact size of this mini tire inflator makes it simple to transport.
USB charger fits standard 12-volt outlet in your car, truck, motorcycle, or boat. Current adapts to your device's amperage for safe recharging. Removable weatherproof cap protects ports when not in use. ... Features: USB charger fits a standard 12-volt outlet to charge your devices in your car, truck, or boat 3.3-Amp charger adapts to your device for safe recharging 2 USB ports can be used at the same time or use 1 for USB-C fast charging Luminescent face makes it easy to find port in the dark Specs: Charging amps: 3.3 3-Year limited replacement warranty
Use this load disconnect isolator with your Redarc Manager30 battery management system (BMS) to protect your auxiliary battery from excessive discharge. Voltage spike protection reduces the risk of damage to the BMS and your vehicle's equipment.
Mount this compact heater on your dash to quickly defrost windshields and other surfacts. Plugs easily into a 12-volt accessory outlet.Features: 12-Volt heater mounts easily on your dash to defrost your windshield and other surfaces Plugs into a 12-volt accessory outlet 3-Position heat swich allows for different levels of heating Separate switches are used to operate the fan and LED flashlight Handle swings out to use heater as a spot defroster Specs: In-line blade fuse: 15 amps Length: 5-1/2" Thickness (at thickest point): 2-1/4" Width: At widest point: 7-1/8" At narrowest point: 3-5/8" Mounting base: 4-1/8" long x 2-3/8" wide Power cord: 7' 90-Day warranty Note: This is not recommended to be used for more than 20 minutes at a time.
Filters
