Review of the Buyers Products 8" Wheel Chocks with 3' Rope Video

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

What you're seeing isn't that uncommon with the way the coil springs attach, and the air bags will still function properly. The Air Lift 1000 Air Helper Springs #AL87CD are confirmed to fit all models of the 2022 Ford Explorer as long as you…

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

I would recommended checking with your local law enforcement or state highway patrol because laws and regulations vary from state to state. On the other hand, I have seen a couple license plates mounted to the wheel fender. I would recommend a…

For this you will want the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU. It has the same 770lb weight capacity as the Jack #ORJW350D that you found but the ratcheting jack allows you to lock the wheel in place. You will be able to free…

The Ultra-Fab #UF21-001095 wheel chocks are made in China. If you'd prefer a chock manufactured in the US, I'd recommend the #337WC24483 from Buyers Products. If you click the provided link, you can see a video of my buddy Randy demonstrating…

The Buyers Products 8" Wheel Chocks With 3' Rope #337WC24483 weighs 6-lbs.

The 16 inch tire will be safe. The clearance between the fenders is more important for the suspension movement but there won't be enough front to back to have an issue with tires 2 inches apart at rest. For your replacement I recommend the…

For your 2013 Jeep Wrangler JK Unlimited I recommend the Hidden Hitch Ball Mount #80232. This ball mount has a length of 15-3/4"(400mm) from center of hitch pin hole to center of ball hole. That will give you an additional 3-15/16"(100mm)…

In order to get the clearance you need for your bike rack on your 2021 Ford Bronco I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR. This Class III hitch has a 2" receiver and bolts onto your rear bumper beam. It has a maximum…

On trailers, the turn signals and brake lights are combined. You could install the Vehicle to Vehicle Taillight Converter, #118158, but your side marker lights must be dual function lights, like our Optronics Oval LED Turn Signal and Parking Light,…

The #UF48-979002 feature oversized footplates that are 4-1/2" wide by 9" long, so you could use them without leveling blocks. However, it's not uncommon for people to use leveling blocks like #A10-0918 or even wooden blocks under these…