Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input - 27" Long
(12 reviews)
Price: $15.99
Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input - 27" Long
Item # 31300006
Retail:$34.30
Our Price: $15.99
You Save: 53%
Need help with installation?
Locate installers near me- All Info
- Reviews (12)
- Q & A (0)
- Videos (1)
- Photos
Voyager Accessories and Parts - 31300006
- RV Camera System
- Camera Adapters
- Voyager
Camera adapter allows you to connect Voyager cameras to multiplexing systems, video recorders, or digital recorders.
Features:
- Camera adapter allows you to connect Voyager cameras to multiplexing systems, video recorders, or digital recorders
- Molded cable terminals resist moisture
- Includes 12-volt DC power leads
- Length: 27"
31300006 Voyager Adapter Cord - 4 Pin Female Camera Adapter to RCA Connector
California residents: click here
Video of Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input - 27" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Voyager RV Camera System - Camera Connector to RCA Male Inputs - 31300006
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Voyager 27-inch long camera adapter. It's a 4 pin female camera connector to the RCA male inputs. Now this camera adapter will allow you to connect your Voyager cameras to multiplexing systems, video recorders, or digital recorders. They do use molded cable terminals to resist moisture, and if you notice, it does include the 12-volt DC power leads.
Now basically the white and yellow RCA male plugs will plug into your female RCA ports on your device, and then the 12-volt leads will connect, the red one will connect to 12-volt power, and the black to the ground. And as we mentioned, the total length on this extended out is about 27 inches long. So that should do it for the review on the Voyager 27 inch long camera adaptor 4 pin female connector camera connector to the RCA male inputs.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Too difficult to install
Customer Reviews
Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input - 27" Long - 31300006
Average Customer Rating: 4.7 out of 5 stars (12 Customer Reviews)
Camera adapter allows you to connect Voyager cameras to multiplexing systems, video recorders, or digital recorders.by: Peter08/30/2023
etrailer was fast and effiecient. I tracked my order through usps to the border where it stopped moving for about 4 days, but then showed up on my door this am.
I guess they can't be expected to track in Canada.
These adapters will enable me to keep the existing cameras from my JRV212 and allow me to connect them to any stereo (mine will be a Kenwood).
by: Casey01/30/2023
The camera adaptors arrived five days after being notified they had been shipped. I consider that good considering all that could have gone wrong. Haven't installed them as yet however I tried one for fit and it's exactley what I needed. Down side- nothing explaining the two additional wires I assume are trigger and ground wire. Forth time I have used etrailer and I haven't been disappointed yet with their service or the products they handle. They go the extra mile. They are competitive as well. Give them a try.
by: Murray 04/07/2023
Received 3 adaptors as ordered. Parts appear to be correct. Still need more parts to complete install in RV.
by: Andy 05/02/2023
Just what I need to get the cameras goi ng
by: Russell01/18/2022
While the measurement from the plug to the power cable leads is 27", the video/audio cable portion is 20". While not insurmountable, it creates more work to buy or make extensions. As usual, etrailer was spot on with shipping. This is not an etrailer issue though.
by: Joe 02/22/2023
by: Lucas 03/14/2023
by: David 09/21/2022
by: James 10/06/2022
by: Richard 09/14/2020
by: Walter 08/13/2022
by: Tim 07/17/2021
12
12
See what our Experts say about this Voyager Accessories and Parts
- How To Install The Voyager Camera Adaptor On An RVYes, the Voyager Camera Adaptor # 31300006 is meant to be installed to 12v power. You'll want to plug the white & yellow RCA plugs into your radio, the red wire to 12v power, and the black wire to a ground.
view full answer... - Observation Camera Recommendation for Alliance Adventure 32RLSThe Furrion Vision S systems like the part # FOS05TASF are by far the best choice for an RV observation system. These have the best reception and the clearest image. That said there isn't a way to integrate it into the dash of your 2023 Chevy Silverado and you would also need to wire in this adapter part # 31300006 on your truck too though since it doesn't have the correct voltage for the Vision S.
view full answer... - Solution for Furrion Vision S Not Working with 2021 Chevy Silverado 2500HDThe newer Chevy trucks like your 2021 Chevy Silverado 2500HD don't have the power available at the 7-way connector for the Furrion cameras to function properly. The solution for this is to use the Furrion adapter part # FR87PR or wire in the Voyager # 31300006 for more of a permanent solution.
view full answer... - Parts Needed to Install a 7-way on a 2011 Damon Daybreak MotorhomeSince it sounds like you already have a factory 4-way on your 2011 Damon Daybreak, you would need the Universal Installation Kit for Trailer Brake Controller # ETBC7 to adapt that 4-way into a 4-way and 7-way. Given the length of your vehicle you will also likely need additional wire length. The # ETBC7 comes with 25'. If you are installing a brake controller you can use the Deka Jacketed 2 Wire # 10-2-1, if you are just wiring it for the 7-way with no brake controller you can use the 10...
view full answer... - Extension Cable and RCA Adapter For Voyager RV Motorhome Side CamerasTo use the Voyager RV Side Cameras, Driver # VCMS12LGPR and Passenger # VCMS12RGPR on your motorhome with the RCA connections you will need a Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input # 31300006 for each camera. You will also need either a 15' Extension Cable # CEC15 or 25' # CEC25 to route the camera cable to your monitor based on your camera placement.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Matthew E
Edited by:
Amanda M
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.