Hello David, Thanks for writing in! Yes, the #C57003 adapter will fix the issue you’re seeing. Your 2026 GMC Sierra’s trailer light monitoring system is designed to look for a certain level of power draw to confirm the trailer lights are working.…
Yes you will need a new electric over hydraulic actuator to go from drum to disc as the disc brake setups require a higher psi rating. The best option is the HydraStar part #HBA16 as it has the best reputation for reliability and is the fastest…
The wire color code on the Bargman 7-Way Molded Trailer End Connector, part #50-67-103, is White - Ground Red - Left Turn and Brake Brown - Right Turn and Brake Green - Tail Lights Blue - Electric Brakes Black - 12v power Yellow - Auxiliary/Reverse…
Hey Michael, we have the Peterson Led Wire part #PET23NV which is a female style connector that is designed to work with the Peterson LED Side Marker and Clearance Light #PET25NV.
Hello Kerry, thanks for reaching out. That is referring to the taillights on the vehicle. The Curt T-Connector #C93RV will fit the 2025 Camry, but will not work on models with LED lights. What lights do you have on your Camry? Please let me know if…
The best way to make your Freightliner compatible with a trailer 7-Way is to test the functions with a circuit tester #PTW2993 and match sure they match. I'm attaching pin-out diagrams of both the trailer and vehicle 7-Ways that you can use as a…
If you're installing the RedArc BCDC #331-BCDC1225D using the 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger #331-RK1260 you will connect the relay to the vehicle ignition. I've also linked the wiring diagram for this…
The Pollack 2-Pole Connector #PK12801 is designed to have the wires attached with ring terminals. By crimping on ring terminals to the ends of the wires and then holding them on with the included screw.
The #PK12801 has the following dimensions: Top to Bottom: 3-5/8" Side to side: 3-3/4" Cut out: 1-13/16" I've also added a diagram with these dimensions for you to check out.
According to the instructions for the 60-Amp Relay Kit #331-RK1260, the power wires need to be at least 6mm (squared) which is the equivalent to 10 Gauge Wire #10-1-1.
Since the estimated length of the wire run you'll have with the part #331-BCDC1240D is between 18 and 20 feet you'd want to use 4 gauge wire. If the run was less than 16 feet you could use 6 gauge. The two relay kits you mentioned actually…
The three wires of the taillights of your 2005 GMC Jimmy are for, ground, low intensity (running light), and high intensity (blinker/stoplight). The colors of the wires aren't what you need to pay attention to. You need to test the wires for…
Filters
