Search: lippert 5200 axle   >  

The distance from the leaf spring hangers when using the Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2570 should be 29-1/2" or 30-1/2". The hanger spacing is determined by the trailer manufacturer and should not be…

Yes, we've checked with Roadmaster in the past and they've confirmed for us that the Roadmaster Comfort Ride Leaf Spring Suspension Kits like the #RM-2460-2570 that you referenced can be used on under and over slung axle setups. I attached a…

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 is a new system for 7,000 lb axles that isolates each axle. It uses both slipper springs and shock absorbers to accomplish this and give…

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2450 can be used with both underslung and overslung axles. As per the instructions you will need to bolt up the extension plates in the correct orientation for your axle(See…

Yes, you can still install the Roadmaster Comfort Ride Leaf Spring Suspension Kit even though the trailer rides slightly nose high when coupled to the tow vehicle. When installing one of these kits you'll most likely need to get longer U-bolts…

I believe you are referring to the wear pad where the leaf springs make contact on the #RM-2460-2560. You can use an all purpose grease here at the point of contact. Assuming that is where the sound is coming from this should eliminate the squeaking.…

Since the Lippert 4,400 lb trailer axles are 3 inch in diameter the Roadmaster Comfort Ride system part #RM-2460-2560 is correct as that is what diameter axle it is designed to fit. It is also perfectly compatible with the other dimensions you…

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

Yes, the Roadmaster Comfort Ride Shock kit part #RM-2460-2570 will work great on your 2021 Grand Design Reflection 337RLS that has 6k axles currently. Based on the axle tag pics you sent in I can tell you would need an axle we currently do not carry…

You will need to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 for your 2022 Winnebago Minnie 2529RG travel trailer. These leaf springs are rated for 5,000lb axles while the ones in the Kit #RM-2460-2580 you found are rated…

Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…

Yes, the Roadmaster Comfort Ride Slipper Spring System part #RM-2560 will work great with 5,000 lb axles. If you wanted to add shocks to the kit to allow it to have an even smoother ride you'd want the shock kit part #RM-2460 which is designed…