Which Roadmaster Comfort Ride Kit Fits 2022 Grand Design 2910BH with Lippert 4,400 lb Axle

Question

Question:

i have a 2022 Grand Design 2910bh with lippter 4400 lb. axels my springs are 1 3/4 wide but my springs are 26 ins. long Iwant the kit with shocks thanks my thanks again

asked by: David S

0

Expert Reply:

Since the Lippert 4,400 lb trailer axles are 3 inch in diameter the Roadmaster Comfort Ride system part # RM-2460-2560 is correct as that is what diameter axle it is designed to fit.

It is also perfectly compatible with the other dimensions you mentioned as well.

expert reply by: Jameson C

0

Answer 1

Hey Todd, thanks for the information. Since you have Dexter 4,400 lbs capacity axles you'll need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers item #RM-2460-2560. This kit is designed to fit 3" axles and won't…

view full answer...

Answer 2

Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560 is designed to work on axles up to 5,000lbs. So it will work on your 2022 Wildcat with the 4,400lb tandem axles.

view full answer...

Answer 3

I would recommend the Roadmaster Comfort Ride system part #RM-2460-2560 for your 2021 Jayco Jay Flight SLX 184BS that has 4,400 lb axles. This kit will give you all new suspension/leaf springs like you are looking for but since it comes with shocks…

view full answer...

Answer 4

I checked it out, and it looks like your 2019 Grand Design Momentum 2600RB has a 3" axle beam which would indicate that it has 5,200-lb to 7,000-lb axles. So, with that said, you'd need the Roadmaster Comfort Ride Leaf Spring Suspension Kit…

view full answer...

Answer 5

The bushings for the slipper springs in your Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 would not need grease so you can definitely swap out the wet bolts with some standard bolts…

view full answer...

Answer 6

Going from standard leaf springs - even with a rubber equalizer - to a whole new suspension system will 100 percent upgrade the ride of your 2021 Grand Design Reflection 303RLS. While you will certainly get some benefit by going to the Comfort Ride…

view full answer...

Answer 7

If the slipper spring in your Roadmaster Comfort Ride System #RM-2460-2570 is contacting the side of the slipper spring box then either the box is out of alignment with the hangers or the hangers are bent and forcing the spring in at an angle causing…

view full answer...

Answer 8

The Roadmaster Comfort Ride systems do not add height to the trailer if that is what you are asking about. You also can't use them without the shock kits. What diameter axles do you have and what capacity?

view full answer...

Answer 9

I was able to locate that you have the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570. The shocks with that system are 17-1/2" extended and 11-1/2" compressed (loaded). If I misunderstood what you were…

view full answer...

Answer 10

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…

view full answer...

Answer 11

Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…

view full answer...

Answer 12

I spoke to my contact at Roadmaster and they informed me that you should use the 5,000 Lb Rated Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2560 with 5,200 lb axles. I asked about using the 7,000 Lb Rated Roadmaster Comfort Ride…

view full answer...

Which Roadmaster Comfort Ride Kit Fits 2022 Grand Design 2910BH with Lippert 4,400 lb Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching