Checking Out the Replacement EZ Lube Drive-In Grease Cap Video

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item #ET7WK. This includes a 7-Way connector, a…

The Dexter Trailer Hub Assembly #8-258-50UC1-EZ that you referenced will fit well on your axle. I spoke with Dexter and they confirmed the bearings used for your axle are L44649 for both the inner and out bearings and the grease seal has a 1.500 inch…

Thank you for the photo of your vintage utility trailer's spindle. The simplest and surest way to identify a compatible trailer hub is to identify the inner and outer bearings and the grease seal it uses. Matching up those components along with…

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…

I was unable to find a cross reference for the number 41i you said is on the grease seal on your homemade trailer. I have attached a drawing that shows where you can normally find the numbers on seals bearings and races. You may need to use a digital…

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

The correct 54" Yakima Tracks for a Camper Shell is part #Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part #Y01127 and part #Y64MR are for metal roofs and ladder racks respectively. Since…

The Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 will replace your missing rubber cap on your Dexter E-Z lube axle hub.

The 1.18" width on the Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 is the only size that is offered.

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

The rubber cap needed to use with the #21-41-1 is the part #RG04-010. It does not come with the cap.

To protect the galvanized coating on the Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel #AM31994 you do not need to add any protectants or coatings. You will simply need to keep the wheels clean using a soap and water. It is…