bing tracking image
  1. Trailer Leaf Spring Suspension
  2. Roadmaster
  3. Boat Trailer
  4. Camper
  5. Car Hauler
  6. Snow Trailer
  7. Utility Trailer
Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles

Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles

Item # RM-2460-50
Retail:$298.73
Our Price: $252.35
You Save: $46.38
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 28 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2460) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. Fits 3" axles. Great Prices for the best trailer leaf spring suspension from Roadmaster. Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles part number RM-2460-50 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (126)
  • Q & A (0)
  • Photos
  • Why etrailer?

Roadmaster Trailer Leaf Spring Suspension - RM-2460-50

  • Boat Trailer
  • Camper
  • Car Hauler
  • Snow Trailer
  • Utility Trailer
  • Suspension Kits
  • Round Axle - 3 Inch
  • Triple Axle
  • Shocks
  • Roadmaster

Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2460) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. Fits 3" axles.


Features:

  • Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2460) for use with a triple-axle trailer
  • Bolt-on installation
    • Included tie plates with extension pieces replace your existing U-bolt plates
    • Upper brackets mount on trailer frame with included hardware
    • Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle
  • Limited Lifetime Warranty


Specs:

  • Application: triple-axle trailers with leaf spring suspensions
    • Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle)
  • Shock length:
    • Extended: 17-1/2"
    • Compressed: 11-1/2"
  • Quantity: 2 shocks
  • 1-Year warranty


2460-50 Roadmaster Comfort Ride Shock Absorbers - Triple Axle Add-On Kit- 3" Axles





Customer Satisfaction Score:


Customer Reviews

Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles - RM-2460-50

Average Customer Rating:  4.8 out of 5 stars   (126 Customer Reviews)

Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2460) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. Fits 3" axles.

by:

Installation Review (will update after road test) Great tutorial video. Highly recommend a quality bolt/nut loosening solution. Makes a big difference. Rented an angle drill for the top bracket 5/16th" holes due to low clearance (I ended up buying one it was so useful). Job went smoothly. I wouldn't cut your underbelly until after the install. I may not cut mine at all. Top of shock pushes against it but that shouldn't cause a problem. I added a number of photos, to include the solvent and jack. Top notch company with high quality merchandise.




by:

What I like better than the products are the people and support received
from EVERYONE I have talked to at etrailer. If Forest River was half this good, I might buy another one, but most of the questions or problems I have come across with our fifth wheel have been solved by someone here after talking to a generic moron at the manufacturer.
eTrailer ROCKS!!!




by:

This has got to be one of the best purchases that I have ever made. Angela was awesome to deal with when ordering, the package was delivered in great shape all items accounted for, clear precise instructions and the final result that I was expecting. All in all a great place to do business




by:




by:




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Install wasn’t bad. Grand design welds a V bracket inside the spring hangers for more strength so that was my only challenge on install. This caused a problem on the center hanger as the spacer wouldn’t fit. Had to grind about a quarter inch off the spacer so it would fit as I could only bend the bottom of the hangers so much. Will be towing about 100 miles this weekend so it will be nice to hopefully not have broken drawers in the back of the trailer as well as shelves in the fridge door dislodged. I also did the X factor cross braces on the front and rear hangers for more strength. Will post back after we get more miles on it, but given all the other positive reviews I don’t think I’ll be unhappy.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Excellent product! Absolutely TRANSFORMED my towing experience! Installed on a 2017 Open Range 310BHS travel trailer. Approximately #10,500 loaded. Trailer doesnt bounce or jolt over the road. Ride is substantially bettter. System is tough, thick, and seems it will last. Instructions are pretty clear, and all tooling neede is pretty basic. I reccommend a digital inclinometer to be able to set your shock angles precisely. They're cheap on [online]. I reccommend this kit to every single person who has the same bouncing issue. Could not be happier with the purchase!




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


The Roadmaster Comfort Ride Shock Absorber kit on our Forest River Surveyor travel trailer was a great upgrade on our travels on rural highways and areas with wind. On our trip last fall from the Oregon Coast to Northern Idaho was a good test of this system and made for more relaxed driving! Should be installed at the factory!




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Along with the new springs....everything works as advertised. Well satisfied. No complaints.
I had to modify the one set of shock brackets to fit, as I have raised the trailer 5 inches
to match up with the 4 inch raised truck.
Otherwise...no swaying....no bouncing........no problems.
Thanks etrailer for your help.


Comments
Great. On a 32 ft. WildCat fifth wheel..No problems. In the driveway, I installed the Shock system, heavier springs. I had to modify the shock-to-frame brackets, as the trailer has been raised 5 inches. Along with the MorRyde Stabilizers the trailer tows like a dream. Be sure to have the wet bolt grease nipples pointing out to the side of the unit for easier access. Next project will be to replace the scary Magnetic Brakes with a hydraulic system. Thanks etrailer. Kudos to your wonderful support crew. It was just like calling my buddy next door.
Delta D - 08/02/2021


by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Great kit, really beefy high quality components, nice powder coating. Because my axles are above the leaf springs which I believe is relatively rare, the kit needed some modification, not too bad if you're handy and have additional tools. This kit is a no brainer for axles underneath leaf springs, pretty much bolt on from seeing the eTrailer videos, dramatically improved ride quality on my 20 mile test drive, looking forward to our next trip.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Instructions where easy to follow and install went without incident. Only took the trailer for a short test drive after install so can't determine if trailer is riding better of rough roads.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


OMG! After having the trailer bottom out on the stock springs while traversing a RR crossing, this system has proven to be amazing. Returning from a VA campground I crossed multiple RR crossings and traveled some rough pavement. I found I had left a bottle of shower soap on the ledge in the shower! It was still there when I set up in my yard. Not possible with the stock suspension!


Comments
This was the best thing I could have done to make the 5th wheel experience a good one. Prior to installing failing to properly secure things in the trailer would not end well. After the install, items remained where they were last placed.
Bruce H - 04/11/2021


by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


I put this kit on my fifth wheel camper. The installation was was relatively simple. It made a noticeable difference in ride quality that I can feel even in the truck. When you hit a bump or a dip in the road the trailer doesn’t continue to bounce down the road. I’ve put over 5,000 miles it since the shocks were installed and I’m very happy with this upgrade. I would highly recommend it.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Just finished installing the Roadmaster shock system on my Momentum 398M tri-axle. The kit arrived well packaged and all items were included. The instructions that come with it are pretty straight forward and easy to understand. This would probably be a lot quicker install with some helping hands, but I did it by myself in about 6 hours. The hardest part of the entire setup is all of the overhead drilling, but with a little redneck ingenuity I was able to make that bearable. As far as this kit goes, the ordering process and the outstanding customer service from Angela W, etrailer.com rocks!! This could be the start of a wonderful relationship..


Comments
Still feel it is the best upgrade you can do short of going independent. Still a great product for the price.
Johnny - 04/19/2020


by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Product came with good instructions and installed exactly as advertised. Haven’t tested it on the road yet. I am going on a trip from Texas to New Mexico. The roads are terrible. Hope this makes the trip easier.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


I would recommend this over other type upgrades. It may cost more but like the saying goes you get what you pay for. Install was not difficult.Installed on a 2015 Fuzion 325 toyhauler,towability plus road jarring much improved having ridden in trailer before and after,you can sit in the rear in your seat and not get thrown out.The other notable upgrade was the reese goose box fith wheel hitch,a real good upgrade. Tow vehicle 2016 RAM 3500 CAB CHASSIS 4×4 CUMMINS 6.7 DSL Bradfofd built Aluminum 4 box bed.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


So far so good on my 2015 Open Range 3X427BHS!

Overall, the old suspension system was just rusted and worn out and the tires were a maximum of 1" apart, which made me really nervous while pulling. It was tough to remove, but nothing a little WD-40 and some praying couldn't fix!

Installation was pretty straight forward using the included directions and [online video] University. Looking forward to seeing how it rides this weekend on our next trip.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Installation was difficult. I had to release the spring shackles to drive the screws, but the chaos in the trailer appears to be reduced




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


The system was installed on a 35', 10.5K lbs (GVW), bumper pull travel trailer. It tows fine and the bouncing has improved, but not as much as I had anticipated. Your advertisement indicated the ride was greatly improved but I find things still falling over/bouncing around. I would suggest the system improves the trailer handling as the axle placement, connect point, road condition etc also effect the trailer handling...




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


I don’t know what I did without my Roadmasters! Best decision I ever made! The ride is sooo much smoother!




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


After 1 year we are still very pleased. Have about 5000 miles towing and it is a much better ride. Worth the money. Ride is much better. We did have it professionally installed. It's a pretty big project for a driveway mechanic


Comments
Continues to perform very well.
Philip - 04/09/2021


by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


This is a great product, it smothered out my fifth wheel nearly eliminating the chucking.


Comments
Still working great. It was a great addition to my RV
David A - 07/06/2020


by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


Great addition to my camper. After being frustrated with broken leaf springs, stuff broken in the camper and being jarred from pot holes, I installed these shocks to help the ride. Easy to install (just takes time) and a great addition.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


I've installed this on a 5th wheel about 1 year ago and I have to say I've been very pleased with this purchase. While stuff in the trailer still gets out of place, it feels like it has improved the handling of the trailer over rough roads and during windy conditions. I've probably put about 5,000 miles on my trailer after installing this kit and have to say I have no regrets with this purchase.




by:

Review from a similar Comfort Ride in Trailer Leaf Spring Suspension


We bought a new Grand Design 22 foot Travel Trailer and Ford Expedition Tow Vehicle. Even after we installed a Curt Trunnion Bar Equalizer Hitch, the trailer bucking was unbearable for long trips. It was so bad we were ready to sell the whole rig. The suspension of all travel trailers is sub-standard.
We bought the Roadmaster RM-2450 Shock absorber kit and installed it ourselves. It made a WORLD OF DIFFERENCE in the ride! However, the installation was not easy for a 76 year old man. Thanks to a neighbor with a flat paved driveway and an extensive tool inventory, I got it done. You need pre-planning and high jack stands. Read the instructions and view some online videos before committing. Verify that there are no gas or water pipes next to the trailer frames.
Determining the location of the upper shock frame bracket is tricky. This measurement sets the angle of the shock absorber, and has to be done BEFORE you lift the trailer and remove the wheels! You have to have the trailer loaded, the wheels on the ground and the tow vehicle connected. Then install one shock absorber from the bottom up and measure where the upper bracket sets on the frame. Then you can disconnect and lift the trailer up on jack stands and drill the frame holes. I was lucky that I was close to the IDEAL 35 degree angle on my trailer. I don't know what you would do if you are outside the 25 to 40 degree allowable range.
The instructions say you have to get 12" long drill bits to drill into the bottom of the frame. There's not enough clearance to insert a standard drill between the springs and frame. Pushing the drill up overhead, and having the bit tight to the springs makes it almost impossible to get the holes straight. So when you drive the self tapping bolts into the holes it is very easy to strip them. A better solution is to have a low profile angle drill. Otherwise you'll be welding the brackets or glueing bolts.
We also installed heavy duty shackles, wet bolts and bronze bushings while the trailer was up on the jack stands. You have to refer to other reviews for that. The Trailer Mfg. stock components are junk.


Comments
Great. We’ve towed all over the country about 13,000 miles, and we’re still pleased with the ride.
Roger - 05/23/2021

25
126
Show More Reviews

See what our Experts say about this Roadmaster Trailer Leaf Spring Suspension

  • Should 2019 Cyclone 4005 with Triple Axles be Fully Loaded when Installing Comfort Ride Shock Kit
    What you want to do is load your trailer about halfway so that your suspension will be sitting in the middle of fully loaded and dry for installing the Roadmaster Comfort Ride Shock Absorbers # RM-2460. I confirmed this with my contact at Roadmaster. Please note that since you have a triple axle trailer you also need the Add-On Kit # RM-2460-50. Attached is a review video and the written installation instructions for you to check out.
    view full answer...
  • Recommended Suspension Enhancement for 2017 Grand Design Momentum 376th Toy Hauler
    I have a solution for your 2017 Grand Design Momentum 376th, but there is a not a SuperSprings or Sumo Springs product designed for this application. The best solution to improve the handling and reduce chucking and porpoising on your trailer is the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460 and Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles # RM-2460-50. This heavy duty shock system with...
    view full answer...
  • Are New U-Bolts Needed When Installing New Suspension On An RV
    When installing a new suspension system like the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers # RM-2460 you mention, it is not required but a good idea to replace your old U-Bolts. Reason being that, any bolt, of any grade, when torqued, stretches. The better the grade the less it stretches, and I'm assuming manufacturers aren't using the top grade. That being said, when you look at how the suspension system is designed, there is 4 U-Bolts holding the axle, to the springs,...
    view full answer...
  • Will Roadmaster Comfort Ride Shocks RM-2460 Fit A 2019 Forest River Sierra 357RE 5th Wheel Trailer?
    Based on the pictures you provided the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460 will fit your 2019 Forest River Sierra 357RE 5th wheel trailer with tandem 7000lb Dexter axles. The # RM-2460-50 you were looking at is a single add on kit for a triple axle trailer, and isn't what you would use on your tandem axle trailer. This kit will do a fantastic job of improving the ride and towing quality of your trailer as the nitrogen filled...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Comparing Roadmaster Comfort Ride Shock Absorbers for Triple Axle Trailers to Tandem and Add-On Kit
    You are correct that they are the same thing. The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers # RM-2460 combined with the Roadmaster Comfort Ride Add-On Kit # RM-2460-50 will have the same parts as the Roadmaster Comfort Ride Shock Absorbers for Triple Axle Trailers # RM-2460-3. So there is no difference aside from that fact that one is for tandem axles with the add-on kit to upgrade for triple axles and the other comes with everything in one kit for a triple axle trailer.
    view full answer...
  • Will the Roadmaster Comfort Ride Add-On Kit Work On Underslung Axles
    Yes, the Roadmaster Comfort Ride Add-On Kits like part # RM-2460-50 for 5,200 lb - 7,000 lb axles will work on both overslung and underslung axles without issue.
    view full answer...
  • Shock Kit Recommendation for 2022 Coleman Dutchmen Lantern 17B
    The best shock kit for your 2022 Coleman Dutchmen Lantern 17B that has 3 inch underslung axles is the Roadmaster Comfort Ride kit part # RM-2460-50. This will make a huge difference in the smoothness of your trailer's ride.
    view full answer...
  • Can I Use the Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers on a Single Axle Trailer?
    I spoke with my rep at Roadmaster and he said as long as you have a 3" axle then the Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers item # RM-2460-50 will fit your 22’ Apex Nano trailer as a single axle application. The upper brackets will mount on the trailer frame with included hardware and you will replace your existing u-bolts with tie plate extensions that the shocks will attach to.
    view full answer...
  • Shock Absorber Kit That Will Work on Single Axle Trailer With 3 Inch Diameter Axle
    We do have a shock kit that will work for your 2022 Jayco Jay Flight with a 3" diameter single axle; it is technically called an add-on kit for Roadmaster's Comfort Ride shocks but can be used for a single axle trailer, which Roadmaster has verified for us. The correct part is the following: - Roadmaster Comfort Ride Add-On Kit # RM-2460-50 The # RM-2460-50 says it is for 5,200 lb to 7,000 lb axles, but it is really for 3" diameter axles - it's just that the most common 3" diameter axles...
    view full answer...
  • Roadmaster Comfort Ride Shock Absorbers for a 2020 Jayco 405 Talon Trailer
    For your 2020 Jayco 405 Talon it's going to depend on what size axle you have. The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 8,000-lb Axle item # RM-2470 fits 3-1/2" axles. The Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles item # RM-2460-50 fits 3" axles. You will need to determine what size axles you have to decide which kit to buy. I have linked a review video so you can see this system in action.
    view full answer...
  • Shock Kit for Forest River Vengeance 5th Wheel
    If your 2016 Forest River Vengeance has tandem 2-3/8-inch axles you can use Roadmaster Comfort Ride Shock Absorber kit # RM-2450 which has nitrogen shocks to reduce the bounce from your leaf spring suspension. If it is a triple axle you will also use the Add-On Kit # RM-2450-50. If instead you have tandem 3-inch axles you can use kit # RM-2460 and add part # RM-2460-50 for a triple axle setup. Lippert kit # LC281281 is for single axle trailers.
    view full answer...
  • Will the Roadmaster Comfort Ride Add-On Kit Work On Underslung Axles?
    Yes, there are single axle shock kits for underslung axles. This are typically used to add on shocks for the extra axle on triple axle trailers but they also work on single axle applications. These shocks will work on overslung and underslung axles. If you have a 2-3/8" diameter 3,500 lbs axle you will want the Roadmaster Comfort Ride Add-On Kit item # RM-2450-50. If you have a 3" diameter 5,200 lbs to 7,000 lbs axle you will need the Roadmaster Comfort Ride Add-On Kit item # RM-2460-50.
    view full answer...
  • Best Fit Bolt-On Shock Kit for a 2019 Palomino Puma 5th Wheel Trailer
    For your 2019 Palomino Puma 5th Wheel Trailer, I recommend you use the Roadmaster Comfort Ride Shock Kit part # RM-2460-50 instead of the Lippert Components Bolt-On Shock Kit part # LC281281. The reason for this is because the Roadmaster Kit is designed to be mounted on the inside and to the bottom of the frame rail. Therefore, you won't have to worry about the minimal frame to tire clearance that you have now. Unfortunately, I cannot advise on notching the frame, using wheel spacers,...
    view full answer...
  • Timbren Suspension Versus Shock Absorbers for Triple Axle Trailer
    All around, shock absorbers like the # LC281255 would provide a smoother ride than a rubber spring like the Timbren SES type system like # TTRA1032. You'll want to be sure to use the correctly rated system for your axle capacity. The # LC281255 you'd looked at is rated for 3500 lb axles, you'd need three of them. For a higher rated 5200-7000 lb axle, use # RM-2460 along with the # 2460-50 add-on.
    view full answer...
  • Can SumoSprings Or Timbren Springs Pair With Roadmaster Comfort Ride Suspension For 7,000LB Axles?
    If you were to add either the SumoSprings # SS26MV or Timbren # TTRA1032 to a trailer with the Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2570 it would still provide you with more stability. This can be very helpful on a 5th wheel which has a full kitchen or large slide out on one side of the camper. The shocks included with the Roadmaster do help to absorb road shock and vibration but do not give you additional support like both the SumoSprings or Timbren jounce springs....
    view full answer...
  • Recommended Bolt-On Shock Mount Kit For A 2022 Jayco Jay Flight SLX 7 195RB
    The correct kit will depend on the weight capacity and diameter of your axle, but we definitely have a couple options for you to look at. From what I could find about your 2022 Jayco Jay Flight SLX 7 195RB, the GVWR will be 3,995 pounds, so I definitely recommend double checking the axle capacity before going with one of these. With that out of the way, first we have the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281255 for a 3,500 pound 2-3/8" axle or # LC281281 for a 5,200...
    view full answer...
  • Recommended Shock Absorbers For Trailer With Single 3" Diameter Axle
    I have another option for you but the Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles # RM-2460-50 is an add-on for a tandem axle kit to add shocks to a triple axle trailer and will not work on a single axle trailer. Since there is not a Roadmaster Comfort Ride option for a single axle trailer I recommend the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Axle # LC281281 which will fit your 3" axle perfectly. You...
    view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee David F
Installed by:
David F
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830