Pro Series Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs

Video Transcript for Pro Series Trailer Jack - Side Frame Mount Jack - PS1400980376 Review

Today we're gonna be taking a look at the Pro Series Square Jack. This jack is perfect for agricultural, construction, live stock, or heavy duty utility applications. It's made from a sturdy steel construction. It's got a nice painted black finish on it, so it will offer some rust and corrosion resistance. It's a really nice design. The side handle, the crank handle is included.

It's a nice, heavy duty, very strong and durable design. It's going to feature a weather-resistant inner and out tube that has that black paint finish on it. It does have a drop leg with a non-spring return, so that's gonna increase overall extension for maximum adjustability. Plunger pin is positioned to the front. This is a direct weld design, meaning that it will directly weld onto the framing of your trailer or at the mounting location. Again, side-crank, and hardware to get that installed is included. It's got the nice integrated, large footplate.

That's going to prevent sinking on softer surfaces, really helps spread out the applied weight on the jack. It's got nice handles here on the footplate. And that footplate's at the base of the drop leg, so those handles are designed to allow you to easily guide the drop leg when lowering it into position. That foot plate measures about eight inches by eight and a half inches. When it comes to the overall height, right now the unit's in the fully retracted position. It's gonna be about 28 1/4 inches from the bottom to the top.

When it's fully extended, that's around 40 3/4 of an inch. So, if you subtract those two measurements, that's gonna give this jack a travel measurement of 12 1/2 inches. Then your drop leg provides and additional 13 3/4 travel. So, really nice design. Drop leg is very easy to operate. You just pull this pin.

It's on a spring, so you pull it, rotate it, and then you can easily lower the drop leg. So, if I just lift up on this portion here, that's your drop leg. That's a four hole design, and those holes are separated on center by 3 3/8 of an inch. So that's gonna be your incremental height adjustment. The unit's gonna feature a lift capacity of 10,000 pounds, with a static capacity of 12,000 pounds. The unit's set up to where the handle can be installed on either side of the jack. When it's not being used, you can rotate it out of the way. And it does come with a hanger that can be welded on to your frame, and what that is designed to do is to simply hold the handle out of the way when it's not being used. So, if you have that welded on, you can move the handle to the stored position. So that's a nice feature that's included as well. Last thing I want to mention is that when it comes to maintenance, pretty simple with this jack. On the jack there's gonna be two greases Zerks, one right here, and then one, it's hard to see but kinda just up in this area at the tip of my finger. Two grease Zerks on the unit allow you to easily attach a grease gun, pump grease in to lubricate internal components to keep them working as they should. So maintenance on this unit is very easy as well. That's gonna do it for today's look at the Pro Series Square Jack.