Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
We have heard about these problems with the Ram OEM TPMS sensors not working on aluminum wheels because of the thickness of the rim. It sounds like you're having the same issue and don't have enough threads to get the sensors all the…
view full answer...Thanks for the pictures and the additional information! I just spoke with my rep at Lippert and your 2021 337RLS Grand Design Reflection 5th Wheel has a 1621 Pin box. You will want the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter…
view full answer...I am not aware of any instances where a king pin has actually broken off, but I can confirm that using an adapter can be rough on the fifth wheel frame. In fact, Lippert, who manufactures the fifth wheel frames for many different fifth wheel…
view full answer...Yes, 5 mountain bikes with 3 inch wide tires would fit on the Curt Premium 5 Bike Rack #C18065 that you referenced. I attached a picture that shows the rack fully loaded with bikes and you can see that mountain bikes fit pretty easily on this rack.…
view full answer...Thanks so much for the photo; based on that I was able to verify with Lippert that what you have is a Lippert 1116 pin box. The correct Goose Box to replace the 1116 is the following: - Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler…
view full answer...Thanks for the pictures! I would be happy to help you find the correct pin box. I just spoke with my rep at Lippert your 2017 Eagle HT 27.5RLTS has a standard 1621 pinbox with a 15,500 lbs capacity. You will need the Reese Goose Box item #RP85FR you…
view full answer...In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…
view full answer...Have you considered something like a scissor jack, #JSC-24. You would attach this to the bottom of a flat surface. When fully retracted, it hangs down only 4 inches. These jacks are sold in pairs. For a single jack, it is #JSC-24-IND. If you can tell…
view full answer...The head of the B and W Companion hitch part #BWRVK3370 is fully articulating meaning it can tilt forward and back as well as side to side. If you check out the review video I attached you can see the head of the system's ability to pivot and…
view full answer...I looked up the G-HDSJ-24 jack you're mentioning and it comes back to a scissor jack with a 7.5K capacity. Since we do not carry the Domar brand we are not going to have a direct replacement, however the Lippert Scissor Stabilizer Jacks w/ Handle…
view full answer...The Rhino-Rack Artificial Rain Gutters #739A are a universal fit since you'd be drilling through the wall of the trailer and bolting them in place. The only issue you might have is just with the bolt length. If the wall is too thick then…
view full answer...It sounds like you might be trying to pick out a set of stabilizer jacks for your trailer. If that is the case then what you will want to do is park your trailer on flat-level ground and then level it. Once this is done you can then measure from the…
view full answer...Related Searches
Filter Your Search
Contact and Help