Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2
(478 reviews)
Price: $138.73
In Stock
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2
Item # UF48-979002
Retail:$147.17
Our Price: $138.73
You Save: $8.44
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (478)
- Q & A (102)
- Photos
- Why etrailer?
Ultra-Fab Products Camper Jacks - UF48-979002
- Leveling Jack
- Stabilizer Jack
- Scissor Jack
- 6500 lbs
- Bolt-On
- Weld-On
- Ultra-Fab Products
- 24 Inch Lift
- 2 Jacks
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Features:
- Scissor jacks level and stabilize 5th-wheel, travel, horse and cargo trailers
- Heavy-duty worm-gear jacking mechanisms prevent slippage
- Perfect for stabilizing loads
- Large footplates provide excellent stability
- Bolt-on or weld-on installation
- (2) 3" Wide x 10" long mounting plates have multiple holes to fit most applications
- Mounting hardware not included (3/8" bolt is recommended)
- E-Z crank handle included
- Sturdy steel construction
- Black powder coat finish resists corrosion
Specs:
- Quantity: 2 jacks
- Lift: 24"
- Collapsed height: 4-3/4"
- Collapsed length: 26"
- Support capacity per jack: 6,500 lbs
- Combined support capacity: 13,000 lbs
- Footplate dimensions: 4-1/2" wide x 9" long
- Mounting plates: 3-1/2" x 7-1/4"
- Lifetime warranty
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.
48-979002 UltraFab Scissor Jacks - 24" - 2 Pack
Customer Reviews
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 - UF48-979002
Average Customer Rating: 4.8 out of 5 stars (478 Customer Reviews)
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
- UF48-979002
Steven - 11/09/2020
by: Steven11/08/2019
if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.
Comments
Perfectly! Keep em clean with a coat of lubricant & theyll serve you well!
Steven - 11/09/2020
- UF48-979002
by: Oldguy04/27/2021
These replaced my BAL scissor jacks with the hook crank on them. These have the socket end, which is Super nice if you use a drill, but the manual hand crank is very cheaply made, the socket isn't even centered with the crank rod. the rubber on the handle to hand crank is nasty feeling, not of quality at all. These jacks come with a Lifetime warranty, which is why I purchased them, but the steel is a thinner stamped steel, not the Quality steel they make them sound to be. only reason for a 2 star and not a 1 star, is because these have the socket end on them, and not the little hole with hook.
- UF48-979002
WhoisMe58 - 10/18/2020
by: WhoisMe5810/16/2019
All 4 Jacks arrived as stated. I Have placed them on the RV. They are doing as described. Very Happy. This the 2nd time I have ordered Stabilizer Jacks. These are for a second Trailer. I also have quick Jack Releases for the Jacks as to be easily removed for storage. I will continue to order again from this company.
Comments
Great I am always on the move and they make it so much easier. A lot better than my original Jacks.
WhoisMe58 - 10/18/2020
- UF48-979002
by: Scott D.03/09/2016
The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.
- UF48-979002
weszab - 01/17/2015
by: weszab01/17/2014
Easy to mount jack Closes to a very small size Load and unload without the trailer connected.
Comments
The jacks are still working great. Thanks again!
weszab - 01/17/2015
- UF48-979002
by: Dave B.04/23/2014
eTrailer processed the order quickly and I had the jacks within 3 days....thank you eTrailer. They were really easy to install and operate flawlessly. I was concerned that they threading would be too fine and the jacks would take forever to raise and lower, but I was wrong. They operate smooth and fast with no issues. If you need to stabilize the back end of your trailer I would certainly recommend these.
- UF48-979002
by: Mark Cornell05/11/2020
The jacks worked excellent and will definitely recommend this company to anyone needing parts for their RV... I will be buying more things for my camper soon
- UF48-979002
by: Ronald04/01/2021
Very good company to work with... Despite a delay, they went above and beyond to communicate routinely on the status and outlook for delivery. The product quality was outstanding as a consideration,
- UF48-979002
by: Harry06/03/2019
I purchased these stabilizers to replace the electric stabilizers on my 2017 Jayco. The electric stabilizers were terrible. They rusted in two years and didn’t do much to stabilize the camper. These new ones installed quickly and easily and I immediately noticed the difference. They arrived within 3 days of ordering.
- UF48-979002
Harry R - 08/16/2020
by: Harry08/15/2019
These jacks are clearly more heavy duty than the original. Now to remember that you have to turn the screw backwards. Received very quickly.
Comments
Jacks work great. Much sturdier than the originals.
Harry R - 08/16/2020
- UF48-979002
by: Michael Maldonado05/03/2020
The strength n purpose is great. I would like better tool for extending n rising jack but it’s doable. I know you must keep lubricated even under cover rust quickly. Overall very nice product probably overkill with my 900 lb trailer . Any suggestions on best lubricant? Thank you
- UF48-979002
by: David02/10/2021
Construction of the jacks appear to be much more substantial than the cheap original jacks installed by Catalina. So far they have not been any problem.
- UF48-979002
by: Ryan04/21/2021
Mounted them on the rear of my toy hauler. They worked great.
- UF48-979002
by: Jerry06/05/2018
Excellent people to deal with, fast shipping and I mean fast. Excellent product did exactly what we wanted, no more swaying.... Yay. Only took 2 hours to install, fast and easy
- UF48-979002
Gene S - 08/12/2015
by: Gene S08/12/2014
By weight alone, two of the removed OEM jacks weighed what one of the jacks I just received weighs. The Quality it great and they fit right where the previous jacks fit. The Travel Trailer feels more stable with the new jacks and I can now get a little help when minor level is required when parked on uneven surfaces. I should have done this right away, not after coming back from a 7000 mile trip. The OEM jacks would twist if I put too much load on them and the new jacks do not have that problem.
Comments
Jacks more better than original jacks. OEM Jacks barely supported my trailer, but after installing the new jacks in all four corners my Travel Trailer is more steady than it ever was.
Gene S - 08/12/2015
- UF48-979002
Wayne S - 05/02/2021
by: Wayne05/01/2020
Fast easy delivery
Comments
Great. Still working and holding strong.
Wayne S - 05/02/2021
- UF48-979002
by: Scissor Jacks12/20/2019
Attempted to buy jacks from another company but never heard back from them, sent one message with measurements to etrailer, heard back within 24 hours that the product i inquired about would not work, BUT this item would. Ordered, received quickly and 4 bolts later jacks installed without any additional drilling or need for self tapping screws. From this point forward etrailer will always be first choice to look at.
- UF48-979002
by: Rick04/26/2021
Seems very heavy duty
- UF48-979002
by: Tony06/27/2018
New jacks and tires arrived quickly. Installation was easy since no new drilling was required.
- UF48-979002
by: Kathleen06/16/2020
Etrailer is a very good place to buy your trailer parts. Everything I bought from them so far has been quality. The only thing I was disappointed in was how long it took to get the stuff I ordered (but it was free shipping so I shouldn't complain)
- UF48-979002
by: Gary L09/26/2019
Unfortunately after mangling one of my scissor Jacks during a recent camping adventure, I found this twin pack from Etrailer. They were delivered within three days even with free shipping. These Jack's were the exact replacement for my Flagstaff Classic hard sided pop up camper. The Jack's are more heavy duty than the factory original and had it replaced in just a few minutes. Now I even have a spare. Thanks Etrailer
- UF48-979002
by: Daniel11/01/2017
First....ordering and receiving 2 pair of stabilizer jacks (UF48-979002) was as expected ..fast! Second....I ordered this particular set because when lowering the jack both sides of the jack come together instead on just one meaning more support and lift on the "transmission" side which is both sides instead of just one. Third.... which worked out great for me.....my old jacks were welded on from the factory and the new jacks were of heavier quality and lucky for me I was able to pull the two bolts holding the jacks on their welded bracket, drop the old jack and insert new jack in place of the old one. Price...shipping....quality..... was all great!
- UF48-979002
by: Frank T05/23/2016
I have a 2016 Winnebago View 24J. The jacks will easily stabilize the RV. Very good construction and should last a good long time. The only reason I did not give it 5 star rating is that I am disappointed that I could not permanently affix the jacks to the RV. The holes on the top plate of the jack does not line up with the holes of the RV stabilizer points. Although I could modify the jacks to make them fit, there would be two other problems. 1-The jacks would point to the center of the RV, making it awkward to attach and use the handle to screw up the jacks. And...2-Although of good construction, I don't think they would last very long if permanently affixed to the RV and subjected to constant road dirt, grime, and water. So, I will just store them in a compartment. Not that big a deal.
- UF48-979002
by: John of Salt Lake City08/05/2019
The original jacks on my Forest River Trailer met with a catastrophe. The jacks / stabilizers from etrailer were built with heavier materials and have been used for many trips to western states and British Columbia.
- UF48-979002
by: Scott S06/25/2017
I used 4 of the ultra fab 6500lb scissor jacks for stabilizing our 26' coachman motor-home. They worked great! Rear ones mounted to the coach frame using existing holes in the frame and jacks. I was worried about mounting the front ones permanent due to perceived clearance so just placed them under after parking.
33
489
Show More Reviews
Ask the Experts about this Ultra-Fab Products Camper Jacks
- Can Ultra-Fab Ultra Scissor Jacks Be Used without Leveling BlocksThe # UF48-979002 feature oversized footplates that are 4-1/2" wide by 9" long, so you could use them without leveling blocks. However, it's not uncommon for people to use leveling blocks like # A10-0918 or even wooden blocks under these jacks to provide extra stability (see photos). This is especially helpful in soft surfaces like grass or dirt. What you do want to make sure is that you chock your wheels to prevent your travel trailer from rocking and rolling when parked. For that,...
view full answer...![Image 1 for]()
![Image 2 for]()
- Recommended Flatbed Cargo Trailer Stabilizer Leg for Rear of TrailerFor your Sure Trac ST9614 HLODOD-B-140 trailer I recommend adding the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. I believe these will work well to stabilize your trailer for loading. They can be adjusted using the hand crank or you can use the Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005 if you prefer. If you want more of a solid mount drop leg stabilizer that you would weld on, we have the Square Drop Leg Stabilizer Jack...
view full answer...![Image 1 for]()
![Image 2 for]()
![Image 3 for]()
- Heavy-Duty Scissor Jacks for 15,000 lb Tiny HomeWe have scissor jacks that will work for you, just keep in mind that scissor jacks are only designed to stabilize a portion of your weight as opposed to the full 15,000 lbs. The scissor jacks with the largest capacity are the Ultra-Fab Ultra Scissor Jacks # UF48-979002 (24" lift) and # UF48-979031 (30" lift). These jacks have a 6,500 lb per jack capacity so the pair will have a total support capacity of 13,000 lbs. So long as part of the weight is spread out on your tiny home these jacks...
view full answer... - Scissor Jacks for Rockwood Mini to Use with JTs Strongarm KitThe most stable and heavy duty scissor jacks we offer are the Ulftra Fab set part # UF48-979002. We've had customers install the JTs Strongarm kits like part # LC191025 on them without having to drill so these would have correct bolt size.
view full answer... - What System Can I Use to Both Stabilize and Lift my Camper?I have a solution for you but using any type of stabilizer jack to lift your camper is a no go. They are designed specifically to stabilize they are not rated for lifting. In most cases during storage it is not required to lift your wheels off of the ground they will generally keep their round shape as long as they're inflated properly and will be just fine when you pull it out for use. We do have a storage option generally used for vehicles but that will work great if you are concerned...
view full answer... - Can the Scissor Jack part # UF48-979002 Lift Trailer Enough to Level TrailerYou would want to use the Scissor Jack part # UF48-979002 to level the trailer and would not need to also use a separate jack to do the lifting. These scissor jacks would operate similarly to jacks that come with vehicles for changing the spare. That being said you would not want to use these to lift the wheels in the air.
view full answer... - Manual Scissor Jack to Replace Electric Jacks on Springdale Summerland Series SM2450 by KeystoneWe have scissor jacks like the Ultra Fab Jacks part # UF48-979002 that have 24 inches of lift and a 6,500 lb capacity. When you remove your old jacks and wiring basically you'll just have to start by removing the wiring near the jacks and switch and work your way back to where it connects to your RV's power source and then take it all out. Or if you want to leave the wiring in place you can disconnect it from the battery and then remove only what's easily accessible.
view full answer... - How Does JTs Strongarm Kit Attach to Base of Scissor Stabilizer Trailer JacksActually if you are using the JT's Strongarm kit for scissor jacks part # LC191025 with the Ultra Fab jacks part # UF48-979002 you are supposed to be using the replacement jack base bolts instead of what comes with the jack so that they are long enough for the kit to attach. That might be your issue as to why you couldn't get the old set to fit properly.
view full answer... - stabilizing jacksOn your 1985 Ford Econoline Class C I recommend using the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 they will be a perfect match. The 24" of lift will work even in uneven terrain while camping. They will also make a world of difference when it comes to keeping everything steady and prevent all of the shifting you currently get. When using these they should be attached to your frame. When collapsed they are only 4 3/4" thick if you'll install these to the frame half way between the...
view full answer... - Replacing Old Atwood Drop Down Stabilizer JacksReplacement parts are not available for the stabilizer jacks that you have. Your best option would be to replace them. I actually recommend going with something a little more stout that will last longer such as a set of scissor jacks like # UF48-979002. You could then use speed socket # UF48-979005 with an electric drill to make raising and lower the jacks super fast.
view full answer... - Recommended Upgrade Replacement for BAL Stabilizer JacksThe closest thing we have to your jacks are the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. These are BAL jacks that have a restricted height of 4-3/4 inches and an extended height of 28-3/4 inches. I've attached a video to assist and the mounting holes dimensions of each so you can compare the differences.
view full answer...![Image 1 for]()
![Image 2 for]()
- Stabilizer Jack Recommendation for 14 Foot Enclosed Cargo Trailer for MotorcyclesThe stabilizer jack I recommend for your enclosed cargo trailer is the Drop Leg Stabilizer Jack # TJ01RT because it will work well to stabilize your trailer for loading and unloading and is easy to engage when needed. The # TJ01RT drop leg stabilizer jack will install on the bottom of your enclosed trailer and can either be welded or bolted onto the trailer. I've attached an installation video for you to see an example of a bolt on installation. Additionally, this jack can support 1,000...
view full answer... - Replacement Husky Stabilizing Scissor Jacks for Heartland TrailerTrailer components like jacks and stabilizers are not typically trailer-specific and most any properly rated scissor jack should work great as a replacement on your Heartland Trailer. You will just want to make sure the weight capacity is at least equal to what you currently have installed and that the jack height is comparable. The Ultra-Fab Leveling Scissor Jacks # UF48-979002 referenced in your question have a 6,500 pound support capacity per jack (combined support capacity of 13,000...
view full answer... - Recommended Stabilizer Jacks for a M416 TrailerI do have options for you but none of our swing down stabilizer jacks have an extended length longer than 18". Instead, I recommend using the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 which have a 6,500 lb weight capacity and 24" lift. The jacks can either be bolted or welded to the trailer frame. You can also use the Ultra-Fab Speed Socket part # UF48-979005 to lift and power the jacks with a power drill. I have attached a review video of the above jacks for you as well.
view full answer... - Scissor Jack Recommendation for Front Stabilizers of 2017 Coachmen Catalina 281 DDSI looked at pictures of your 2017 Coachmen Catalina 281 DDS and found that at the front on the frame standard scissor jacks are mounted on it. We have the Ultra Fab scissor jacks part # UF48-979002 which would be a great option to replace the ones on your trailer that were damaged.
view full answer... - Replacement Weld On Scissor Stabilizer Jacks For Camper TrailerThe Ultra-Fab Ultra Scissor Jacks part # UF48-979002 will work well to replace the weld on jacks on your trailer. You just want to make sure the width of the foot plate is not going to be an issue. The mounting plates of the 2 Ultra-Fab stabilizer jacks included in this part number are 3-1/2" x 7-1/4". I have attached a diagram for your reference.
view full answer...![Image 1 for]()
- Recommended Replacement Leveling Jack for 1998 Sunnybrook Travel TrailerFor your 1998 Sunnybrook travel trailer, I recommend the Ultra-Fab Ultra Scissor Jacks - 24" Lift # UF48-979002. With these jacks you can use the Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 for an easy system. If you just need one jack, you can use # UF48-979006. You also may be interested in the CIPA Wireless Trailer and RV Level w/ Hand-Held Device and LED Indicators # CM03001 to make leveling easier.
view full answer... - Can Scissor Jacks Be Used to Stabilize a 31 Foot Class C RVYes, scissor jacks like # UF48-979002 work well as stabilizers for trailers and RVs. You also might want to consider the 4-pack of stabilizers, # UF48-979004. Each one of these has a capacity of 6,000 pounds. They are for stabilizing only and not for lifting. They stack or nest together or easy storage. They are height adjustable from 11 inches to 17 inches. A great option if you do not want something permanently attached to the trailer.
view full answer... - Recommended Scissor Jacks For Primetime Avenger Travel Trailer That has 8,400 Lbs Dry WeightWe do carry scissor jacks that can handle the weight you described for your 2014 Primetime Avenger 32BIT Trailer. I recommend the Ultra-Fab Products Trailer Jack, part # UF48-979002. This comes with 2 jacks in the set and each jack has a weight capacity of 6,500 lbs, which gives you a total weight capacity of 13,000 lbs. That is more than enough to handle the 8,400 lbs you said you have. These jacks can be bolted or welded on for installation. To make it easier to raise and lower...
view full answer... - Scissor Jacks Slowly Lowering on Their OwnI spoke with my contact at Ultra-Fab, who is one of the leading names in stabilizer jacks, and she said that she has never come across the issue that you are having. The best we could come up with is if you are using the stabilizer scissor jacks to jack up your trailer instead of stabilizing it once it is already jacked up then that could have possibly damaged the scissor jacks. Since your scissor jacks seem to be defective I recommend checking with the manufacturer to see if they have...
view full answer...![Image 1 for]()
- Can Scissor Jacks be Used to Level a 5th Wheel Trailer and Will it be Hard to Manually Crank ThemUltra-Fab Ultra Scissor Jacks # UF48-979002 are designed to stabilize and support a trailer. To do so they will push up on the trailer but they cannot lift the trailer up off the ground so keep that in mind. This is true for all scissor jacks. Considering that the jacks will be placed where the trailer is the heaviest it would be difficult to manually crank the jacks. But if you used drill attachment # UF48-979005 and an electric drill it would make it a lot easier and faster. Another...
view full answer... - How To Determine Fit of the Ultra-Fab Ultra Scissor JacksThe Ultra-Fab Ultra Scissor Jacks part # UF48-979002 are universal in fit and not specific to any one make and model. That said, I don't see any reason as you why you could not install these jacks on your trailer so long as you have space under the frame rail for them to mount. If you are simply replacing existing stabilizers then there will be no issue. I recommend using two sets of jacks, one on each corner as this will best help stabilize the trailer. The Ultra-Fab Ultra Scissor Jacks...
view full answer... - Recommended Stabilizer Jacks for a Class A MotorhomeFor your Class A Motorhome you are probably going to want to use the Ultra-Fab Ultra Scissor Jacks part # UF48-979031 instead of the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 as they offer more lift which will be needed. They are designed exactly for what your asking which is to help stabilize the motorhome while parked. They will do an excellent job of this and you can install as many of them as you like but you will want to match the numbers on each side. They will require...
view full answer... - Recommended Leveling Jacks for 2016 Coachmen Freelander RV To stabilize your 2016 Coachmen Freelander RV, I recommend looking at scissor jacks like the Ultra-Fab # UF48-979002. These can be either bolted or welded to the frame of your RV and they feature large footplates to provide excellent stability. They include an E-Z crank handle for easy operation and each single jack has a weight capacity of 6,500 pounds. Mounting 4 of the jacks (2 sets) to the bottom of the frame at the four corners of your RV will provide great stability and keep it from...
view full answer... - Will Stabilizer Scissor Jacks Help with Movement in an RV From People Moving AroundThe Ultra Fab Scissor Jacks part # UF48-979002 are designed to do exactly what you are looking for. They will stabilize the RV so that when people move around the hole trailer doesn't move. You may also be interested in slide-out stabilizers as well like the part # JB-30. This will further help stabilize the trailer by bracing the slide out as well.
view full answer... - Can Scissor Jacks Be Used to Level a 24 Foot Heavy Duty Car Hauler TrailerScissor jacks # UF48-979002 are meant to support weight but not lift it like you said so these jacks would not be the best option for your trailer. Scissor jack # JSC-30-IND is listed as having the ability to raise, lower, and stabilize so you could use it with handle # JCH-1. Or use drill attachment # UF48-979005 to speed up the process.
view full answer...
Do you have a question about this Camper Jack?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality camper jacks for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper jack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Kristen H
Updated by:
Halie H
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.