1. Camper Jacks
  2. MORryde
  3. Stabilizer Jack
  4. Manual Stabilizer
  5. Bolt-On
MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs

MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs

Item # MR82AR
lowest price pledge
Retail:$209.99
Our Price: $198.50
You Save: $11.49
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 20 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability. Call 800-298-1624 to order MORryde camper jacks part number MR82AR or order online at etrailer.com. Free expert support on all MORryde products. Guaranteed Lowest Price and Fastest Shipping for MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (34)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

MORryde Camper Jacks - MR82AR

  • Stabilizer Jack
  • Manual Stabilizer
  • Bolt-On
  • MORryde

Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.


Features:

  • Cross braces permanently attach to your scissor jacks to reduce your RV's movement while parked
  • Braces extend and retract with scissor jacks for easy setup and storage
  • Included tension handle lets you adjust the braces for maximum stability
  • Black powder coat finish resists corrosion
  • Easy, bolt-on installation with included hardware - no drilling required


Specs:

  • Tube dimensions:
    • Fully retracted: 69" long x 1" wide
    • Fully extended: 78" long x 1" wide
  • Weight: 20 lbs
  • 1-Year limited warranty


Notes:

  1. Bolts securing the footplate and mounting plate to jack must be 3/8" in diameter. If the bolts on your jacks are smaller than 3/8", you will need to enlarge the bolt holes prior to installation.
  2. Scissor jacks must be mounted at a 90-degree angle from your trailer's frame.


SP54-181 MORryde Scissor Jack X-Brace Stabilizer





Video of MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for MORryde Scissor Jack Cross Brace Stabilizer Review

Hey everyone. Shane here with etrailer.com. Today we're going to be taking a look at the MORryde Scissor Jack Cross Brace Stabilizer. Most campers or travel trailers are gonna come standard with scissor jacks. Scissor jacks are designed not to lift the trailer up but to stabilize it. Problem we find with scissor jacks, are they don't stabilize completely.

So you're still gonna get a lot of movement inside the camper. Adding the MORryde cross brace stabilizer onto your existing scissor jacks, is gonna take a lot of the extra movement out of those jacks that you otherwise would have, if you didn't have the cross braces on there. Now there are different types of stabilization systems out there for your camper. This setup, in my opinion, is gonna be more of an economical solution. Now with the the other types of systems out there, we would have to remove our factory scissor jacks, in order to get them installed.

With this setup, we can maintain the use of our factory scissor jacks and our cross braces are gonna mount directly to 'em. Now, if we didn't have our crossbars on there, each jack is going to support that side of the camper or that portion of the camper. Adding these on they're gonna go from the top side of one jack to the bottom side of the other on the front and back side. This allows us or gives us more of a single stabilization unit while still allowing each Jack to be adjusted independently for different terrain levels. Each bar when fully retracted is gonna be 69 inches long.

When fully extended, it's gonna go up to 78 inches long. As I mentioned before, even though we have these on, we're still gonna be able to use our Jack independently for unlevel terrain. So if we have one a little bit higher or a little bit lower than the other, we're gonna have plenty of adjustability in our bars to allow for those changes. This setup is gonna come with a handle and how they adjust is on the top side of each bar. You're gonna have a pin that sticks out like this.

On the end of your rod, it's gonna have two cutouts. You simply place it on and you twist. It allows you to change the tension on the bar. One thing to keep in mind when you're adding tension to it, you wanna make sure that you're not overdoing it because what we're doing, is we want the tension or we want our feet to sit flat on the ground. If you put too much tension what happens is the outside of the foot will start to lift up and you don't want that. One thing to keep in mind, if you're interested in this type of setup, you need to make sure that your scissor jacks are running diagonally across the camper. Some setups may have scissor jacks that are turned at an angle. If your jacks are turned in that angle, this setup will not work for you. Our bars are gonna to be a nice metal construction with a black powder coat finish that are really going to help resist rust and corrosion. As far as the installation process, they're going to come with all the hardware necessary to get them installed. A couple things to keep in mind, if the existing hardware that you're gonna be replacing your deck is smaller than the hardware that comes in the kit, those holes will have to be drilled out. The other thing to keep in mind. Is some jacks are a little bit wider. So the hardware that comes in the kit may or may not be long enough that at which time you can just replace them with longer bolts. Now these are only gonna come in a set of two or set for two jacks. So if you want any second set for your other jacks you can find those here at the etrailer. Now that we've gone over some of the features, let's walk with you how to get them installed. To start your installation. One kit is gonna come with two short bars. They are gonna be the outer and two long bars which are going to be the inner tubes. We're gonna take the longer one. At the end, there's gonna be a hole. We need to make sure that that's facing down. On our short outer tube, on the end, it's gonna have a hole. We need to make sure that's facing up. We're gonna slide the longer one inside the shorter one. We're gonna spin this end clockwise and make sure that it's pushing the longer tube out. Once we know it's pushing it out, we're gonna spin it counter-clockwise to the shortest position. Next thing we wanna do is you're gonna extend your jacks down toward the foot is just touching a solid surface. We don't want to make sure that we're not supporting any weight or else we're not going to be able to remove any hardware. Then what we're gonna do is you're gonna measure from the center of the jack up by the frame rail from one side to the center of the jack by the frame rail on the other side. If it's under 72 inches, we can move on to installing our cross braces. If it's over 72 inches or 72 inches or over, on your crossbar or your support braces, these longer inner tube on the end there's gonna be a nut and a bolt. You're gonna remove that. You're gonna extend this out and then re-install that nut and bolt. It's not really, it doesn't really matter what side you start on. I'm gonna start on the passenger side. This is gonna be the front of the drag, rather the side that faces the front of the camper. We're gonna take our stabilizer bars. The larger and the short tube. This end is gonna mount. There's two bolts at the very top. It's gonna mount to the inside. So what we're gonna do is we're gonna remove that inside nut and bolt. We're gonna use a 12 millimeter wrench on the head side and half inch socket on the nut side. Remove that bolt. Your kit's gonna come with new hardware. And in your kit you're gonna get two different sized bolts, longer and a shorter. Our longer one is gonna go in the top. You may find that this bolt that comes in your kit is a little bit bigger than the one you pulled out. You can always drill out the hole, open the hole in this plate here, big enough to get that bolt through. We're gonna be installing the head side on the backside of our Jack or left side across brace the hole there. That is gonna go on the end. I'm gonna slide spacer block on first and gonna make sure this is facing up. We'll slide that on. And then we'll install the nut. Next we'll come back with a 9/16 socket and wrench. We're gonna tighten the hardware down. We wanna make sure that we're not over tightening it. And what I suggest doing, after you get one installed, go ahead and rotate your, the bolt or the drive nut for your Jack and make sure your arms are moving. If they're not and their binding up, that means you have the bolts too tight and you loosen them up a little bit. Next, we're gonna take out this inside lower bolt. We're gonna repeat the process we did on top for removing that bolt and getting our new one to fit with the exception that the bolt head is gonna be on the front side and not the backside of the jack. Once you have your bolts in place, put on our spacer. we're gonna take the opposite end of the second support brace. We're gonna slide it on. Once we get that installed, we'll install the nut and then we'll tighten it down. Now we're gonna come over to the other side of the camper. We're gonna repeat the same process on the Jack with the exception, the bar that's on that's mounted to the top, on the other jack, is gonna mount to the bottom on this side and then vice versa for the one on the backside. Once you get one installed, if you bought a second set you can repeat the process for the second two jacks. That's gonna do it for a look at and installation on the MORryde Scissor Jack Cross Brace Stabilizer..


Customer Reviews

MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs - MR82AR

Average Customer Rating:  4.6 out of 5 stars   (34 Customer Reviews)

Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.

- MR82AR
by:

I bought 2 sets of these, one for the front and one for the rear (I wish they sold a full set of four as a package) These stabilizers remove almost all the bounce from the camper. The only bounce now is if you actually jump up and down. I picked the MORryrde over others because there was no drilling into the frame, it was a simple bolt on install making the extra cost worth it. I did have to buy longer bolts for my particular jacks.



- MR82AR
by:

I have installed the scissor jack cross bars on front and back of our 30 ft elite passport travel trailer. I can still feel movement when you walk around in the trailer. Not sure if they are worth the xxx.xx I spent on them.


Comments
I am sorry you are still having a lot of movement. Please note that scissor jacks must be mounted at a 90 degree angle from your trailer frame and also the mounting plate to the jack must be 3 eights in diameter.
-- Etrailer Expert Sierra K - 08/27/2021


- MR82AR
by:

Love this product! Really helps to keep the camper from rocking when people are walking around. Highly recommend.



- MR82AR
by:

The product arrived quickly and in good shape. The installation was quick as all accessories fit perfectly. Solved the shaking problem of my trailer.



- MR82AR
by:

The package looked pretty beat up. But all parts looked good.



- MR82AR
by:



- MR82AR
by:



- MR82AR
by:



- MR82AR
by:



- MR82AR
by:



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


The initial problems with broken box and losing parts in shipping were solved early. The lacking instructions were also solved also in a timely manner. The stabilizers are installed and work as good as hoped! Now I just have to level up the 5th wheel and line up the holes put the pins in, turn until snug and I’m done.



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Must buy! We have a 36’ Forest River 5th wheel, no auto levelers. Our trailer would move side to side easily even with King pin stand. Installed this in 30 minutes. Tightened up the shafts and couldn’t budge the trailer. I’m 300lbs and put all my weight into it, my son said he could feel I was trying to move it but didn’t shake at all. Game changer. No more side to side. Can’t say enough on how much this stopped the side to side movement. So easy to install. Set up one set takes 20 seconds to tighten. Must buy if your having the same problem I was having. Wife can sleep better even when I roll to the side. No shakes!



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


I just want to say etrailer is the best I had gotten a MORryde product shipped to me from etrailer A important piece was missing talked to Paula at etrailer and the next day part was in my hand great job I have bought from e trailer before and is always the best at getting me the product I ordered fast



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


This is very good system for our use. Would have given 5 stars but the ratchet strap was missing. No big deal as I have many. It’s just the point.


Comments
Thank you for the review and for bringing that to our attention. Our Customer Service Team will be reaching out to you.
-- Etrailer Expert Brooke M - 08/26/2021


- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Great site easy to navigate. Ordering is a snap and the staff is always friendly and knowledgeable. Love etrailer!



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Trailer is very sturdy after install. Quick and easy without taking up alot of storage space



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Stabilizer works great. Much improved stability as we move around 5th wheel.



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Simple to install. Does its job. A bit expensive, but I look at it as an investment in my 5th wheel.



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


We haven’t yet tried this stabilizer out yet but will at or next camp trip in a couple of weeks. There’s no installation instructions enclosed and I don’t see a link on their site for one. I imagine we can figure it out but would be nice to have the help.



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Stabilizer is very sturdy and easy to u se.



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


It was easy to install



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Excellent response on everything thank you.



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Another quality MORyde product.



- MR22AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Excellent product, price and quick deli very.



- MR72AR
by:

Review from a similar X-Brace Stabilizer in Camper Jacks


Thanks for your help Everything works p erfect.


25
33
Show More Reviews

Ask the Experts about this MORryde Camper Jacks

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Shane H
Test Fit:
Shane H
Employee Jonathan Y
Video by:
Jonathan Y
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624