Complete Breakdown of the 3rd Brake Light Logic Module Video

Hey Paul! To power the 3rd brake light you will need to tap into the yellow and green wires on the towing harness and use the 3rd Brake Light Logic Module #PP20-702 to filter out the turn signals. Older Silverado's had a dedicated wire but it is…

For your 2021 Chevrolet Silverado you will have to splice into the factory wiring to use the 3rd Brake Light Logic Module #PP20-702 to connect the left and right turn signals, along with the green wire. You can also combine this harness #PP20-702…

The logic box that you are asking about is our Pacer Performance 3rd Brake Light Logic Module #PP20-702. This is a piece of equipment that is required when using an LED light as a 3rd brake light. If there is a specific light style that you are…

Since your trailer uses a combined wiring system where the stop and turn signals run on the same circuit, in order to add a third brake light to your trailer you would need to use a 2-Wire to 3-Wire Converter, like part #118158. This will convert the…

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into…

Thanks so much for the picture. It looks like you're wiring up the Pacer Module #PP20-702 to a trailer side 7-Way connector, which you then plug into the 7-Way on your truck to power the topper's lights. I was able to zoom in on the connector…

Hello Jean-Marc; to connect the third brake light you can use the 3rd Brake Light Logic Module #PP20-702. You will tap into the left and right brake/turn signal wires and run that up to your third brake light. The module will filter out the turn…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

The 3rd Brake Light Logic Module part #PP20-702 is what we recommend and use when powering the third brake light on a camper shell as it's designed for this exact purpose. There are two input wires (both yellow) in which you'll attach the…

Hello again John; when First Brands took over as the parent company for Bargman they discontinued most of their lights. That includes the direct replacement for the 30-91-010 and 30-91-011. Typically we recommend the the Peterson Trailer Tail Light…

Hey Geroge! You can use the Curt T-Connector Vehicle Wiring Harness #C59DR, but you'll also need an adapter that separates out the stop signal from your turn signals. The 3rd Brake Light Logic Module #PP20-702 is a great tool to use for this, but…