Search: 1.5 inch hitch   >  

Yes, the etrailer Trailer Hitch Receiver part #e98848 which is what I recommend, is a confirmed fit for a 2023 Honda CR-V Hybrid Sport Touring. It also has a 2" opening so it will be great for towing or other hitch mounted accessories like…

Yes! We do have those parts for your Yakima SwingBase #Y34VR. The replacement parts you need the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR (Yakima part 8880953) and the Replacement Hitch Bolt Threaded Insert…

I checked with Yakima and for the Exo Swingbase part #Y34VR the correct replacement hitch pin bolt is the part #Y52FR.

I spoke with Yakima and they informed me that the part you are looking for has been discontinued and is no longer available for purchase. There is also not a direct replacement either but they did say the Replacement Hitch Bolt and Clip for Yakima…

Thanks for the picture of hitch pin, but what was really helpful was actually the set of instructions you have in the background. Based on that you have the first version of the BigHorn which was made around 2001 and the correct hitch pin replacement…

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt and is the same bolt that comes with the part #8890260. The size wrench you would use to install or remove this bolt is 15/16…

Good news! I was able to go out to the warehouse and measure the pin that is included in the Replacement Hitch Bolt kit #Y8780022 and found that when placed in the lock you will have 3.66 inches of pin length between the lock and the head of the…

It sounds like you are trying to get the best hitch mounted suspension for your vehicle to not transfer the shock. The Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop, 3-1/2" Rise - 7K #325-GH-12001 will absolutely…

Looking at the setup of a 2017 Forest River R-Pod 182G, you won't be able to put anything on the rear of the trailer so your only real option is going to be on the trailer A-frame. I recommend using the Extra Offset Trailer Spare Tire Carrier by…

To use the Curt 2 Inch Trailer Ball, #40038, with the B&W Ball Mount, #BWBMHD30010, you will want to use the Reese Hitch Ball Bushing, #58184. This will not reduce the towing or tongue weight capacity of the hitch ball or the ball mount, but you…

The Saris Traps Fork-Block Bike Carrier Base - Single Track - 47" Long #SATRK14 has a width of 3 inches. The Saris Traps Fork-Block Bike Carrier Base - Triple Track - 47" Long #SATRK34 has a width of 7 inches. The fork block #SATR1BLK is…

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…