Hitch Adapter 1-5/8" to 2"
(31 reviews)
Price: $72.58
In Stock
Hitch Adapter 1-5/8" to 2"
Item # HT58
Retail:$78.18
Our Price: $72.58
You Save: 7%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (31)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Brophy Hitch Adapters - HT58
- Hitch Expander
- Fits 1-5/8 Inch Hitch
- 7-1/4 In Extension
- 1-5/8 Inch to 2 Inch
- Bike Racks
- Cargo Carriers
- Brophy
Features:
- Converts 1-5/8" to 2" receiver hitch
- Black powder coat finish
- For use with bike carriers and cargo carriers
- Not to be used for towing or with snow plows
- Measurement from hitch pin hole to hitch pin hole: 7-1/4"
Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter
HT58 Brophy Hitch Adapter 1-5/8" to 2"
Video of Hitch Adapter 1-5/8" to 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Hitch Adapters - Hitch Expander - HT58 Review
Today well be reviewing part number HT58. This is the Brophy hitch adapter, thats going to convert your inch and five-eighths hitch to a two-inch hitch. It has a really nice black powder coated finish thats going to help stand up against rust and corrosion.Keep in mind that this extender or this adapter is for use with bike carriers and cargo carriers. Probably need to stay away from some larger, heavier items, so its not to be used for your regular towing or with snowplows. When using this adapter, your weight capacity of the hitch will be reduced by fifty percent. You also need to use a hitch pin and clip, that is sold separately.
This is available as part number PC3. This part right here is the part thats going to slide into the receiver tube of your hitch, and heres your two-inch conversion, so youll be able to slide in your accessory. Youll secure your accessory by using the pin and clip, and you can also secure this to your hitch by using the pin and clip. Now Id like to go over some basic measurements. The overall length of our adapter is right around eleven inches. From the center of one hole to the center of the other, we have about seven and a quarter inches.
The receiver sleeve measures at six and a half inches, and the part that slides into the hitch on our vehicle is right around four inches. Thats going to complete todays review of part number HT58, the Brophy hitch adapter, thats going to convert your inch and five eighths hitch to a two-inch hitch. .
Customer Reviews
Hitch Adapter 1-5/8" to 2" - HT58
Average Customer Rating: 4.9 out of 5 stars (31 Customer Reviews)
by: Sean D08/07/2013
Thank you for the 1 5/8ths - 2 inch adapter. This product is not easy to find. Shipping was fast, and fits great. Fantastic follow-up all the way from shipping to receiving. Will be shopping with you again.
Comments
by: Terry03/26/2022
This hard-to-find hitch adapter is exactly what I have been looking for - and the delivery was very quick.
Next time I know to start my search a etrailer.com.
by: Steven06/20/2022
this is exactly what I needed. It works great thank you
by: Bob05/06/2022
Fast delivery and quality item.
by: fekadu09/15/2020
: Excellent customer service along with great tracking system. I have already start using the hitch adapter. My transaction and product quality have exceeded my expectations. Previous customers’ reviews had helped me to decide shopping at etrailer & I highly recommend etrailer.
by: Gerald 07/03/2020
Had to buy a carrier to haul my father’s scooter. This adapter now allows me to also carry our bikes. The product in of very good quality and gets the job done.
by: Roger K.06/05/2016
I ordered this adaptor because the 1 5/8" receiver welded to my '99 Jeep Wrangler was useless. Nothing is 1 5/8". Because the Jeep has been on more than it's fair share of truly crappy goat paths, the receiver had been tweaked a bit out of shape, and the adaptor didn't fit. However, a few minutes with a grinding wheel applied to the adaptor remedied the situation. The Brophy adaptor now fits just fine, I can now use 2" hitches, and I am a happy camper.
by: James L.07/17/2019
Reduces capacity of existing hitch
by: Matthew S.02/14/2014
Product looks great and fits great. I have used this yet but it fits my hitch well and looks great. High quality.
Comments
by: James02/14/2020
Items arrived quickly, well packed, and were exactly as depicted on the website. I will be purchasing more items from these folks in the future. Thanks etrailer.com!
by: Randy B07/17/2016
Fits and works great. You can't get a 1"5/8 receiver hitch since they don't use them anymore.
by: C Cam09/17/2020
Odd size hitch adapter fit my Jeep YJ perfectly! Shipping was on time. Overall great experience!
by: Mike 05/21/2021
Arrived fast than anticipated. Very good customer service.
by: angela09/19/2016
Hitch adapter was perfect, shipping was fast and the item was exactly as described. I would use this company again.
by: Mario 05/22/2021
Great site, covers all hitch needs
by: Richard F04/06/2017
Bought for son to adapt his jeep receiver. Very good quality.
by: Rick05/10/2017
It was difficult to find, but you had it. Thank you..the hitch was just what I needed.
by: JOsh07/27/2015
The product I received was an example of excellent workmanship. I am very happy with my purchase.
by: MM02/11/2014
Thanks, it fits great! No more welding and grinding steel shims!
I'll send pics...
by: Andrew 07/01/2022
by: John H.05/15/2014
Very nice quality on a hard to find item and a great price!
by: Robert P06/15/2015
Very pleased with the product and the service.
by: Joshua 07/22/2022
by: Dwain06/12/2018
This is a rare adapter but just what I needed.
by: Daniel H08/30/2021
25
31
Show More Reviews
See what our Experts say about this Brophy Hitch Adapters
- Will the Brophy Hitch Adapter # HT58 Convert a 1-5/8 Inch Hitch to a 2 Inch OpeningThe Hitch Adapter # HT58 that you referenced is designed to be inserted into hitches with a 1-5/8 inch opening to convert them to a hitch with a 2 inch opening. So yes, the small end of the adapter is 1-5/8 inches and should work well for you.
view full answer... - Hitch Adapter Recommendation for a 1-5/8 inch HitchThe only thing we offer for a 1-5/8 inch hitch is an adapter like part # HT58 that will convert it to a 2 inch hitch. Adapters like this do cut the capacity of the hitch in half. I also attached a link to a page that has all of the 2 inch hitch ball mounts we carry.
view full answer... - HT58 Hitch Adapter DimensionsI wasn't sure exactly which dimension you are looking for on the # HT58 so I attached a picture that has all of the dimensions on it we have.
view full answer...
- How Long is the 1-5/8 Inch Portion of Brophy Trailer Hitch Adapter # HT58I went out to the warehouse and pulled Brophy hitch adapter # HT58 to take some measurements. The overall length of the 1-5/8 inch part is 4-3/8 from the end to the larger part but 4-1/8 inches when measuring to the weld bead. The overall length is approximately 10-3/4 to 10-7/8 inches. From the center of one hitch pin hole to the center of the other it is 7-1/4 inches.
view full answer...
- Is Hitch Adapter Available To Reduce 2 Inch Receiver To 1-5/8 Inch For Bike CarrierWe do not offer a hitch adapter that will reduce the 2 inch hitch on your new vehicle to accommodate the 1-5/8 inch shank on your bike rack. Anytime you use an adapter on your hitch it will reduce the load carrying capacity of the hitch by 50 percent. My recommendation is to find a bike carrier that will mount to your new 2 inch receiver. If you want to send me information about your vehicle and how many bikes you wish to carry I can make some recommendations for you. I have attached...
view full answer... - Distance from Pin Hole to End of Hitch Adapter 1-5/8" to 2" # HT58The distance from the pin hole of the Hitch Adapter 1-5/8" to 2" # HT58 on the smaller end back to the end of the shank is 1-5/8 inches. I attached a picture that shows this dimension as well as a review video as well.
view full answer...
- Distance from Pin Hole to Back of Hitch Tube HT58From the center of the hitch pin of the hitch extender part # HT58 to the back of the hitch opening measures 2-3/4 inches. I added the dimension to the picture you submitted.
view full answer...
- Availability of Hitch Adapter to Go From 1-5/8 inch to 2 inch HitchThe only size available for a hitch extender to go from 1-5/8 inch hitch to 2 inch hitch size is the part # HT58 which is 7-1/4 inches long. This 1-5/8 inch size is not very common at all which is why the options are limited.
view full answer... - Trailer Hitch Adapter to Go to a 2 Inch Receiver on a 1972 Chevy Monte CarloTrailer hitch receivers on passenger vehicles come in 1-1/4 inch, 2 inch, and 2-1/2 inch. Make sure you are measuring the width of the receiver opening, not the outside width. If it turns out you have a 1-1/4 inch receiver opening then you would need adapter # HTAD. Please note that the use of an adapter will reduce the tongue weight capacity of the trailer hitch by 50 percent.
view full answer... - Hitch Adapter with Size Close to 1-3/4 inch to 2 inchSince 1-3/4 inch isn't a standard hitch size we don't have an adapter for what you described. Most likely you'd need a 1-5/8 inch adapter like the # HT58 that you referenced or 1-1/4 inch to 2 inch like the # HTAD since these are current trailer sizes.
view full answer... - Is Locking Hitch Pin Included With Brophy Hitch AdapterThe Brophy Hitch Adapter, part # HT58 does not come with a hitch pin or lock included. This adapter is not intended to be used for towing or for snow plows, but can work with hitch mounted bike racks and cargo carriers. When using this adapter, you will reduce the tongue weight capacity of the hitch by 50 percent. For a locking hitch pin I recommend the etrailer Trailer Hitch Receiver Lock, part # e98882. If you are looking for a non-locking hitch pin I recommend part # PC3. This includes...
view full answer... - Is There a Cargo Carrier that Can Fit Hitch Opening at Rear of Bike RackWhat you listed having is not a standard hitch size so we don't have a hitch adapter for it. While I don't know what bike rack you have most likely what the purpose of the second hitch opening is to expand the bike rack to go from a 2 bike rack to a 4 bike rack. Or if it's a Hollywood Racks bike rack you could add a hitch carrier directly with the # HR1485 which fits their Sport Rider racks like the # HR1400Z.
view full answer... - Hitch Receiver and Towing Set Up for a 2021 Kia SoulThe only hitch receivers available for your 2021 Kia Soul are class I. They do not make class II hitches for your Kia. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # 24985. This hitch receiver is custom fit and bolts directly to your Kia's frame with included hardware. It has a maximum gross trailer weight of 2,000 lbs and a maximum tongue weight of 200 lbs. It also has a wide range of accessory options like the Swagman Chinook Bike...
view full answer...
Do you have a question about this Hitch Adapter?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality hitch adapters for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate hitch adapter information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.