bing tracking image
  1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Adjustable Ball Mount
  4. Fits 2-1/2 Inch Hitch
  5. Drop - 15 Inch
  6. Rise - 15 Inch
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K

Item # 325-GH-626
Our Price: $781.99
Trailer Hitch Ball Mount
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed. Great Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K part number 325-GH-626 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (252)
  • Q & A (0)
  • Videos (2)
  • Photos

Gen-Y Hitch Trailer Hitch Ball Mount - 325-GH-626

  • Adjustable Ball Mount
  • Fits 2-1/2 Inch Hitch
  • Drop - 15 Inch
  • Rise - 15 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • 21000 lbs GTW
  • Class V
  • Gen-Y Hitch
  • Built-In Pintle Hook
  • Stacked Receivers
  • Steel Ball
  • Steel Shank - Gray

Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.


  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
  • 6 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
    • 2 Pins included to secure accessories to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Ball mount can be used in drop position only
  • Stabilizers attach to vehicle's frame to brace ball mount and distribute load
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


  • Application: 2-1/2" x 2-1/2" trailer hitch receivers
  • Built-in receiver size: 2-1/2" x 2-1/2"
  • Maximum drop: 15"
  • 2" Ball capacity:
    • Gross towing weight: 16,000 lbs
    • Maximum tongue weight: 1,500 lbs
  • 2-5/16" Ball capacity:
    • Gross towing weight: 21,000 lbs
    • Maximum tongue weight: 3,000 lbs
  • Overall height: 18-1/2"
  • Total length from center of pin hole with included ball mount installed: 13-1/4"
    • Total length from center of pin hole without ball mount installed: 10-1/4"
  • Distance from center of pin hole to first weld on shank: 4"
  • Distance from center of pin hole to base of receivers: 5-5/8"
  • Hitch pin hole diameter: 5/8"
    • Distance between pin holes: 1"
  • Accessory pin hole diameter: 5/8"

dimensional diagram

Multiple Stacked Receivers for Easy Adjustment

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 6 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.

pintle hitch

Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.

With the 6 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. This heavy-duty mount is built with a 3,000-lb tongue weight, so you can even use multiple hitch accessories at the same time, as long as there are no clearance issues.

Stabilizers Eliminate Wobble and Help Balance Your Load


Because this mount has such a significant drop, a stabilizer kit is included to prevent any wobble and to keep the mount stable and sturdy as you tow. Simply bolt or weld the brackets onto your truck's frame, and connect the stabilizer bars to the back of the Gen-Y mount. The stabilizer bars can easily be adjusted to span the distance between your vehicle's frame and the Gen-Y ball mount.

If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.

How to Measure Drop on Adjustable Ball Mount

GH-626 GenY Hitch Adjustable Versa Ball Mount with Pintle Lock and Stabilizer Kit for 2.5" Hitch Receivers - 15" Drop - 21,000 lbs

Video of Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable Ball Mount - 325-GH-626

Hello everybody. This is Jeff at Today we're gonna take a look at this Gen-Y adjustable 2-ball mount with the pintle lock and the stabilizer kit for a 2 and 1/2 inch hitch. Has a 21,000 pound gross towing weight capacity. Now this is an adjustable ball mount that'll let you hook up your trailer to your tow vehicle. This shank right here, will slide into a 2 and 1/2 inch hitch receiver on your vehicle.

And then up front you'll have either a 2 5/16 diameter ball or a 2 inch diameter ball to provide the connection points for your trailer coupler. Now, this part here includes this pintle lock accessory. When this is paired with the larger 2 5/16 diameter ball, it'll provide a connection point for a lunette ring coupler. And a lunette ring coupler is the large, heavy duty couplers that have the large lunette ring on the front. And they're made to just drop over the ball, but you do wanna make sure they stay on the ball.

So that's why they include this pintle lock accessory. And what you'll do with that is just pop the pin and clip, slide this back out of the way, drop your lunette ring over that. Once it gets over that, then just push your pintle lock over that, and then you'll line up your hole, put your pin and clip on, and that'll lock it over the lunette ring. So it keeps it from going off. I just wanted to pop up an insert to show you.

There's an example of a lunette ring coupler hooked to this type of ball mount. And you can see that pintle lock over it to hold that into place. And then if you don't want to use it, if you're not using it for a lunette ring and you just wanna use it on a regular trailer coupler, what you can do is take out your pinning clip, slide it back to the other hole, and that'll lock it in the storage. So you don't lose the pintle lock, and it'll keep it there, but it's out of the way. You can still use a regular coupler.

Now because this Mount has such a significant drop of 15 inches, this stabilizer kit right here is included to prevent any wobble and keeps the mount stable and sturdy as you tow. Basically, what you'll do, you'll see on the end of these, right here, these stabilizer bars, they have brackets. And these brackets will go up. And what they'll do is they'll bolt or weld on to the truck's frame, and it connects the stabilizer to the back. And then you can see it's connected to the backup Gen Y Mount pinned into place. So that'll help stabilize since it's such a big drop, keeps any movement from happening. And these can be adjusted. So these bars can easily adjust at the span, the distance between your vehicle's frame and the Gen Y bulb mount. The other nice thing about it is if you happen to remove this mount from your hitch, these stabilizer bars can be disconnected from the brackets using the included pins and clips. Just zoom in to show you that. You can see they use the same pin and clip over here and over here. You can just take that, take out the stabilizer, take it out of there, and you can remove your ball mount. Very simple to install or remove. Now, one thing I do wanna mention, because this has such a large 15 inch drop, this ball mount cannot be used in the rise position. Now the capacity of this ball mount will depend on the ball size you use. So if you use the larger 2 and 5/16 diameter ball, it's gonna get you a gross towing weight capacity of 21,000 pounds, maximum towing weight capacity of 3000 pounds. If you flip it over and use the smaller two inch ball, it's gonna get you a gross towing weight of 16,000 pounds, maximum towing weight of 1500 pounds. And you can see, it does have these stacked receivers. If I rotate this just a little bit, you can see it has 1, 2, 3, 4, 5, 6 different stacked, 2 1/2 inch receivers. And it'll accept the included ball mount pintle lock, as well as other Hitchmount accessories. And then it also comes with these two 5/8 inch diameter stainless steel pins and clips. This will secure the ball mount and the pintle lock to the shank. And one thing I wanted to show you is on these clips, there is a unique feature. They use a twist clip design, makes it a little easier to remove or install. But to remove it, you just twist the clip, and it comes right out, simple as that. Remove your pin, and then when you go to install it, put your pin back in, put one side of the clip in, and then as you push it, that clip will twist and lock into place. Very simple to use. I really like that feature. It's pretty nice. The adjustable height will let you tow trailers of different heights with the same vehicle. Works well if you have a lifted truck. This ball mount itself can be lowered or raised, put in any of these stacked receiver openings to match your application. As we mentioned, the maximum drop on this, if you put this ball mount in the very lowest position, gives you a maximum drop of 15 inches. And just to show you how the ball mount, you can change it. Again, take out your pin and clip, just slide out your ball mount. Flip it over if you wanna use the smaller 2 inch, and again, you can put it in any position for the height you need. I'm just gonna put it back into where we had it, and slide it in until the hole line's up. And then, get your pin to go through there, just like that. Clip it into place, and now you're ready to go with the smaller ball, simple as that. This is a heavy duty steel construction. The ball mount is a nice zinc primer and black powder coat on the ball mount, on the pintle lock accessory, and even on the stabilizer bars. And in the shank itself, has a primer. And then they use a nice durable silver vane epoxy powder coat on the shank to resist corrosion. Now when you do install this into your hit receiver, it will require a hitch pinning clip or a hitch lock for securing it to the hitch receiver. It is not included. We do sell those separately on our website. And they will use a. The hitch pit hole diameter here is 5/8 of an inch diameter. This part is SAEJ684 certified. It is made in the USA. Application again fits 2 1/2 inch by 2 1/2 inch trailer hitch receivers. And one last note, I do wanna mention on this part, is this ball mount does have many different dimensions to it. So what I do recommend for you to do is go to the product page of this part number, and you can verify any dimension that you might need for your application. But that should do it for the review on this Gen Y adjustable two-ball mount with the pintle lock stabilizer kit for a 2 1/2 inch hitch..

Customer Satisfaction Score:

Customer Reviews

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K - 325-GH-626

Average Customer Rating:  4.8 out of 5 stars   (252 Customer Reviews)

Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.


This thing is a monster. I installed it on a chevy 2500 with a 6.5" lift and 37" tires. With 5 different height options I can not imagine any trailer i couldnt keep level. The best part is no more changing hitches just changing the hight. Also, the pintle adapter is an amazing addition too. It's so simple to use and works great. This hitch is expensive but totally worth it.


Great products, great service, quick and really good priced shipping



I wanted to be able to tow any trailer with a single hitch and that is why I purchased this model. Any size ball and pintle hitch all in one implement is great.... the drawback, this thing weights a lot. I don't like leaving the hitch on the truck if I'm not towing, but this thing is too heavy to move and I'm worried about this much weight bending the toolbox on the truck if I hit a bump.

For measurement purposes... This is a 2000 F-350 4x4 on stock 16" rims and tires and a CM flatbed. I got the 5" drop\rise model and it looks like it is going to be great. In case i need it, I added the 1 7/8" ball to the drawbar. When I can afford to get three matched key pins I will order them.


The Gen-Y hitch is a beast and should last forever. It weights approx 55 lbs. Haven’t had a chance to use it yet and I hope that it doesn’t rust like I have seen in some reviews on YouTube etc. My big disappointment is the fact that it does not take my 2 1/2” to 2” sleeve (the 2 ball mount is 2 1/2”) so I can use another hitch with it to move a small trailer that rides lower than this hitch goes. I even talked to someone at Gen-Y to verify that it would work. They said it would. IT DOES NOT. To much pain to send it back. I’m sure I would have to pay shipping.


Overall the hitch is heavy duty and solid. I have ready some reviews about the Pintle option and have used mine for the first time towing an empty trailer. It is showing some wear behind the ball where the wedge is welded. I will try it with a load and see how it holds up.
i hate to give a negative review but for the money it should not have that excessive amount of wear with it’s first use.
I have a curt hitch with the Pintle and it has worked perfectly. I was looking for something that had a better curb appeal with the Gen Y.


Just received my new hitch and my first impressions is that this is a very stout hitch. The hitch is very heavy, so I won’t be taking it off and on much. I’ll leave the stacked receiver on the truck, I had a locking pin to secure it to the truck. I will store the 2-ball mount in the cab for now until I get some locking pins. Don’t want to become a victim of theft! When I obtain the locking pins, I will leave the balls attached. If you want a very stout adjustable hitch, I definitely recommend this Gen-Y hitch. Can’t wait to test it out on the road!


The best hitch you can buy! I run these in my company trucks. Makes connecting to anything we have simple and easy. No searching for lost hitches or figuring out who is using what.


Best hitch on the market . I have them on 33 trucks


best hitch I've owned. I have no doubt it will pull any of our equipment with no problem. odelelia was a big help and so nice when I ordered it a year ago.


Heavy duty, strong and reliable. The black color on the ball scratched off fairly quickly, and the additional length of the hitch may keep some safety chains from reaching the vehicle. These are just things I noticed, but the quality of the hitch is tremendous.


Very good but could of added 1 more pin for the pintle.


Very strong hitch


It’s heavy duty. I think it weighs as much as my equalizer hitch. I just got a new truck so we’ll see on a hitch height but on my old truck I wish I’d gotten the hitch with one height up so I had more adjustment and so it’s off hitting the ground. Oh well I tried guessing. I should of listened to the spirit. But a great heavy duty hitch.


We love these hitches so much we’re replacing all we have in the fleet with the Gen-Y. Etrailer’s customer service is the reason we don’t shop anywhere else.


I used adjustable ball mount to haul a tow dolly and also carry a hitch haul with wood. It worked great.


I just installed the Gen-Y and its way better than my last one (much more stout). I put it on a 2011 f350 with a leveling kit on 35s and Im defiantly glad that I got one with the 7 inch drop. Im also going to be putting it on a Kubota M-120 to pull a 12ft box scraper.


This is a very functional and versatile hitch. Incidentally, the extended horizontal length allows me to drop my tailgate and not hit my trailer jack. The only theoretical downside is the increased torque on the receiver because of the horizontal extension inherent with the hitch design, as well as the massive weight. these issues do not seem to be functionally relevant however. Pintle may come in handy someday. I would buy again.


WOW. That is pretty much the word that sums it up. WOW. Not only because it weighs roughly 60 pounds, but she is pretty to look at to boot. Aside from that - the construction on this thing in a monster. Overbuilt by Hercules to pull down a mountain kind of over built. Exactly how we expect anything truck related to be. You do not want failure at any point, ever. This takes your drop hitch to a whole new level. I have owned B&W and Bulletproof before - and while there is nothing wrong with them - I do not think I will ever use another brand again. This is as good as they come.


It's a great hitch. Fits our needs. Only negative thing I can say is the paint/coating rubbed off almost immediately after putting it to use so there's a rust ring around it where it meets the receiver.


Another great purchase with etrailer. Fastest shipping and the same price as the lowest competitor.


Arrived on time and as specified.


Tow hitch is 100% expensive but towing my trailers has been so smooth it’s defiantly good quality and worth what you pay , defiantly recommend buying a $10-$20 lock so nobody steals it off your truck though!


Very quick!


Bought this product from etrailer and was amazed at the high level of customer service and knowledge. The product arrived ahead of schedule and was packaged well. This product is made well and I’m glad it’s a product of the USA.

Show More Reviews

See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kathleen M
Installed by:
Kathleen M
Employee Thomas T
Installed by:
Thomas T
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee John S
Video Edited:
John S
Employee Alexander C
Written by:
Alexander C
Employee Conner L
Video by:
Conner L
Employee Mike S
Updated by:
Mike S
Employee Manda E
Updated by:
Manda E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.