Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...The best option we have to replace the AV615BHM is the Furrion RV Stereo #DV1230BL. This is also a double din stereo with a DVD player and Bluetooth connectivity; just keep in mind it does require a cutout of 6-15/16" wide x 4" tall…
view full answer...A TruRyde rvd-h-865 7k hub/drum like #AKHD-865-7-2-K uses 1/2-inch drive-in studs that are 1-5/16-inches long. For a replacement stud you can use #165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter. They are also…
view full answer...It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…
view full answer...Although you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox #LG-179015 which will work with…
view full answer...While we do not have a video of the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit #DM8552006-71 being installed on your 2001 Ford F-250 we do have a video of a similar Reese Kit #RP30035 being installed that I have…
view full answer...Good news! I was able to go out to the warehouse and measure the etrailer landing gear #RVLG-8HDL for you. I found that the distance between the weld stops from the outside to outside is 17-1/2 inches and from the inside to the inside of the weld…
view full answer...The base on the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball part #DM8550046 is too wide to fit down into the trough you have on your Cm Truck Bed. It should make full contact at the base so it is not the best idea.…
view full answer...For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…
view full answer...You will need to lock out the sliding function on your Pull Right 5th wheel hitch to use the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item #KPG5-R30IP. If you can not lock out your slider than I recommend the Curt Spyder Gooseneck Trailer…
view full answer...We do have 4-way trailer wiring that fits your 2021 Toyota Venza Hybrid with the Curt T-Connector trailer wiring harness #C57ER.
view full answer...If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
view full answer...Related Searches
Filter Your Search