View Cart

Blaylock Industries Gooseneck Trailer Locks - Gooseneck Set Screw Lock - BLTL-51 Review

content loading



Customers compare BLTL-51 to these similar products




Products Featured in this Video



Review of Blaylock Industries Gooseneck Trailer Locks BLTL-51


Speaker 1: Today we're going to take a look at the Blalock Aluminum Easy Lock Set Screw Lock for the gooseneck couplers. Now this coupler lock will help prevent theft of your gooseneck trailer that has an adjustable coupler. It's designed to slide over the set screw. Does include this aluminum bracket. The steel pin with the washer and then the large steel washer. Now this heavy duty bracket will secure around the coupler set screw, prevents removal of the inner tube from the outer tube on your coupler.

The steel pin right here is what will slide through the bracket and under the screw and then you put a padlock through that hole right there on the pin and that'll secure the pin in place.Now the padlock is sold separately. We do sell that on our website and it's listed on this product page as a related product. Now this is made of an aircraft grade lightweight aluminum construction. It's very strong, resists wear and corrosion. Part is made in the U.S.A.

Again, the application is for set screws on most adjustable gooseneck couplers.Few dimensions on this. Overall height of it, it's going to be right at three and one-eighth inches tall. Total width is about two and three-quarter inches wide. Total depth on it is right about two and three-eighths inches deep. The diameter on the steel pin is three-quarters of an inch and total weight of this when it's all put together is about one pound.Basically, what you would do is go ahead and start your pin through there.

Put your washer right on there. Then what you'll do is this large steel washer, this will install onto the set screw of your gooseneck coupler. What you'll do is remove the set screw, put the washer on there, tighten and put the set screw back in, tighten it down, and it'll hold this washer on the set screw. Then what you'll do is, there's these .. You can see these slots right in here, this will slide down right over the washer, on the set screw, and hold it into place like that, and then you'll put your padlock right here through the hole in that pin and that'll hold it right into place so it keeps anybody from removing that set screw and removing your inner tube from your outer tube.That should do it for the review on the Blalock Aluminum Easylock Set Screw Lock for the gooseneck coupler..


Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Zack K
Installed by:
Jeff D
Video by:
Andrew L
Installed by:
Shane T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.