Troubleshooting One Leg on Landing Gear Not Working
Updated 09/25/2018 | Published 09/24/2018
Products Featured in This Question
Question:
I have a Crossroads Cruiser 5th wheel that one of the front landing jacks stopped working, the other works fine, they are driven by the same motor. could something be stripped out
asked by: James R
Expert Reply:
Although you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox # LG-179015 which will work with Stromberg Carlson landing gear as well as Lippert and Venture.
Another option that could work is using a repair kit such as the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 or Follow Jack Repair Kit # LG-146060 depending on what jack is not working and what landing gear you have.
These repair kits will give you replacement gears and pins for the legs that would allow you to make repairs and possibly get the leg working again.
Product Page this Question was Asked From
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 6001 - 7000 lbs
- Electric Jack
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Search Results: 5th wheel landing gear
- Q&A: How Do You Determine What Landing Gear Is On Your Trailer?
- Shop: Lippert Electric Landing Gear w/ Handle - Inside Mount - 34-3/4" Lift - 5,000-lbs
- Shop: Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
- Shop: Lippert Electric Landing Gear Set - 37" Lift - 6,000 lbs
- Shop: Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
- Shop: Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs
- Shop: Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs
- Q&A: Repair Parts for Venture VMC940RB 5th Wheel Landing Gear
- Q&A: Replacement Landing Gear for 2010 Open Range 5th-Wheel Trailer
- Q&A: Stromberg Carlson Landing Gear Replacement for 2001 Fleetwood Prowler LSI 30 5G
- Q&A: Recommendations For Complete Fifth Wheel Landing Gear For 2004 Jayco Eagle
- Q&A: Replacement Landing Gear Follow Leg for 2003 Keystone Everest
- Q&A: Recommended Replacement Lead Leg for Bent Leg on Jayco 5th Wheel Trailer
- Video: The Low-Down on the Replacement Motor for Stromberg Carlson Electric Landing Gear
- Search Results: fifth wheel landing gear switch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer tires and wheels
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
on Camper Jacks
