Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.
(167 reviews)
Price: $136.73
In Stock
Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.
Item # DL22580
Our Price: $136.73
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (167)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22580
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 12 Inch Lift
- With Wheel
- Steel
- Dutton-Lainson
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.
Features:
- Easy to install:
- Bolt on mounting
- Can be mounted in a variety of ways on various sizes of trailer tongues
- Bolt on mounting
- Smooth operating
- Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle
- Made from heavy-gauge steel for strength and durability
- The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw
- Has maximum manueverability because of the offset swivel caster assembly
- Ergonomic hand grip with textured surface
- Made in the USA
Specs:
- Capacity: 1,500 lbs
- Lift: 12"
- Fits square tongues up to 3" x 5"
- All mounting hardware included
- 2-1/2" Diameter mounting hole in swivel bracket
- Fits most other brands of mounting hardware
- Zinc plated TUFFPLATE finish for longer life
- 3-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
22580 Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.
Compare to Fulton F141133
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs. - DL22580
Average Customer Rating: 4.7 out of 5 stars (167 Customer Reviews)
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.by: Michael 03/30/2024
This double wheel jack was the only one i could find that would replace the jack on my Ranger Bass Boat, The Ranger has a welded swivel mount and with somecareful thought it is a relacement for that jack using thr welded portion of the original.
by: Joseph10/15/2023
FYI: Received the jack and mounted it using the existing hardware. When I went to lock the jack I discovered that the locking pin on the 1500 dual wheel jack is 1/2 inch and the pin from the old 1000 winch is much smaller. Now I have to disassemble and make the holes bigger to accept the pin. It would have been helpful if that was pointed out. Hoping the holes line up.
                                             Joseph Bara
by: Craig01/26/2023
The overall build appears hefty.Tilt works well and stays at 90 degrees when supporting 3 snowmobiles on my dual axle trailer. My 13 year old granddaughter can one hand the crank when raising the trailer with the Jack.Not sure how well the double wheels will work when pushing the trailer in the garage to store but so far no problems.One upgrade they could do is us a better quality handle on the crank.This Jack came assembled!!Handle and wheels on.Quick install!!!
by: Rick09/12/2022
Purchased to replace the broken jack on a 1997 Coleman Destiny Taos pop-up I am rebuilding. I chose to use this bolt on on the opposite side of the original welded jack so I can convert the old jack into a swinging standing foot, or replace it later with an auxiliary weld o jack. Extremely easy installation for this jack. The method of attachment allows me to move the jack forward or backward on the tongue as I see fit. Crank is smooth and easy. Spring-loaded pullout bolt allows for very easy swivel. The original jack had a single wheel and was for a tongue weight of #500, while this new jack has a double wheel and allows for a tongue weight of #1500. As a result, moving the trailer by hand is like pushing butter. As always, the folks at etrailer did a great job of providing information, photos, and videos, to allow me to make the proper choice of item, and they did a great job in contacting me and shipping this to me.
by: ARM07/05/2023
I ordered a dual wheel 1,500 jack and received a single wheel 1,000# jack. When I notified etrailer, they made me feel like it was my fault, they didn't have mine in stock....went to Northern Tool and purchased what I needed. Still have not received my refund :-(
Jenny N.
7/7/2023
I sincerely apologize that we sent out the wrong jack. I will have our Customer Service team contact you about the refund.
by: Mark 04/20/2024
Super fast delivery. Excellent service would highly recommend ordering anything from this site
by: Mark03/23/2020
Fits as needed
My old single wheel jack was not enough
I have a sand car in the trailer it needed to be well made. It is. Time will be the true test.
by: Sean07/02/2023
2nd jack, handle breaks within 2 months, don't waste your time. Go Fulton.
by: Rick B07/30/2014
I purchased this item to replace an original trailer jack that was a little too "lightweight" for the trailer/boat. Based on the hardware included with this jack, I was pleased to learn this jack can be installed on virtually any trailer. I was not able to use the original trailer mount from the original jack, but WAS able to mount this one directly behind the original welded mount. This jack makes any raising/lowering and moving the boat/trailer much easier than the original AND much safer.
Rick B.
7/30/2015
GREAT! I did have to trim the bolts that came with mounting this jack, so it could be rotated to the stored positioned when trailering. This was nothing more than a few minutes with a hack saw. Despite having two wheels, this jack is STILL very easy to rotate when trying to move the boat a short distance by hand. Still a STRONG 5-Star product.
by: trailer jack11/21/2013
etrailer is an excellent source for trailer parts. Great selection, easy straight forward ordering and fantastic delivery. The jack was an easy 5-minute installation and appears to be more robust than the factory installed jack. Operation is smooth and sturdy. The double wheel configuration makes moving the trailer easier and more stable than the single wheel configuration that came on the trailer originally.
Trailer J.
11/21/2014
The trailer jack has worked perfectly for me and appears to be holding up well to the elements, particularly the hot Texas sun.
by: Robert 12/28/2022
The double wheel design is much more stable than the original single wheel we had on the boat trailer. Very easy to use great quality!
by: Kraig 08/11/2023
Amazing service! and great people to work with!
by: Carlo 04/08/2021
Trailer jack mounted with ease,looks good.Excellent dilevery tome
Carlo P.
4/9/2022
great!
by: Brad02/15/2018
Well made jack & easy to install. However most manufacturers including this jack use 100% HD plastic/polymer wheels which are simply terrible. Gravel or rough asphalt (chip seal) just tears up the wheels. They need rubber tread over plastic or aluminum wheels. I have already had to replace the wheels that came on this jack after just one year.
by: Myrna04/09/2019
This product suddenly showed up on the front porch before noon and I thought it was a good fast delivery, coming much sooner than expected. Kudos! Won't have time to open it up and look at it for a few days, just hoping it's as good as one I bought ten years ago that has been hanging out on two boat trailers. This new one is sort of overkill but I hope but will be a nice upgrade to the single wheel one on the utility trailer and stay on that trailer, not migrate to the latest boat. Looking forward to installing it soon. Thanks for good service.
by: Jose04/16/2023
Great service; on time delivery and no visible damage to the products.
by: Rich 09/12/2022
Product works well. Significant improvement over my original jack. Delivered on time. Fair price.
by: Joseph 06/16/2020
Product is much better than the standard jack that came with camper will worth the investment.
Etrailer.com is very good shipment was done in a timely manner
by: Seth08/27/2015
Great strong trailer jack at a fair pri ce!
by: David01/17/2023
Works great
by: Peter 05/08/2020
Great product excellent service from the seller that is etrailer would definitely buy more when I needed something suggest to anyone no problems at all this is not my first time buying from them either
by: Randall 08/12/2022
Fast shipping. Fit perfect. I will shop with etrailer again.
by: sjn01/18/2023
quality product !
by: George s03/01/2018
just installed it.real nice product works great.
George S.
3/1/2019
great.heavy duty.
by: James 06/25/2022
good quality. works as advertised.
25
167
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Recommended Trailer Jack For Enclosed Cargo TrailerIf you have a square frame trailer I recommend a jack like part # DL22580. This is a swivel jack and it has dual tires that make it easier to move. This jack can be used on trailers with a frame up to 3 x 5-inches. Instead of adding a jack to your trailer you may want to consider just using a trailer dolly. We have several tow dollies to choose from based on what you need. If you need a 1-7/8 inch hitch ball for your trailer you can use the Rack'em Trailer Dolly, part # RA20. This...
view full answer... - Recommended Replacement for Dutton-Lainson Jack on New Shorelander Boat TrailerDutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could upgrade your current 1000 lb jack to a 1500 lb capacity Dutton-Lainson model like part # DL22580, which would allow you to utilize your current mount. The jack provides dual wheels for greater maneuverability and stability. You could also use...
view full answer...
- Trailer Jack With Wheel Recommendations For Dorsey TrailerWe have several trailer jacks that have a wheel that allows you to move your trailer around when uncoupled fron the hitch. When choosing a trailer jack you will want to find one that has the capacity to handle the tongue weight of your trailer. I have attached a link to the jacks we have with wheels you can check out. If you are looking for an A-frame jack I recommend part # BD165412. This has a 1,200-lb capacity and has a lift of 19-inches. For a frame mounted jack I recommend part...
view full answer... - Swivel Marine Jacks Manufactured in the USAThe Dutton-Lainson Swivel Marine Jacks are manufactured in the USA. These include the # DL22580 and the # DL22800 1500 lb swivel jacks. I've linked you to the rest of their selection.
view full answer... - Dimensions of the Dutton-Lainson Jack # DL22580I spoke to my contact at Dutton Lainson to get the dimensions you requested. The overall height of the jack when fully retracted is 26-1/2 inches. It measures 14-1/2 inches from the center of the bracket to the bottom of the jack wheel. It measures 12 inches from the center of the bracket to the top of the jack. When fully extended the jack is 38-1/2 inches. This jack has a 12 inches of travel.
view full answer...
- Trailer Jack with Wheels to Make it Easier to Move Around a Trailer by HandStandard trailer jack wheels are either plastic or metal so there isn't a rubber tire available. But we do have the Trailer Valet # STC-V211 which is both a jack and a trailer mover rated up to 500 pounds tongue. You may also be able to use mount # DL22144 which holds a spare tire but can also use that spare tire to make it a dolly. The only problem would be turning since this is a fixed position carrier. Another option is to use a different jack that has dual wheels. That would make...
view full answer... - Dutton-Lainson Trailer Jacks That Are Made In The USAWe carry the Dutton-Lainson line of jacks that are made in the USA. Here are a few of the different jacks that we carry from them. A-Frame Jacks 1,000LB A-Frame Trailer Jack with Caster Wheel # DL74MR 5,000LB A-Frame Trailer Jack # DL22772 Side Mount Jacks 1,500LB Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels # DL22580 2,000LB Drop Leg Trailer Jack with Footplate # DL97MR 2,000LB Pipe Mount Swivel Style Trailer Jack with Foot # DL22682
view full answer... - Where is the Dutton-Lainson Model 3400 Jack Part # DL22300 BuiltThis particular Dutton-Lainson jack is made in China. Some of their other jacks are U.S. built. The Dutton-Lainson Model 6800, part # DL22580 is built in the U.S.
view full answer... - Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane TrailerI went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, # PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your mounting plate on your LAK sailplane trailer model T-5. The overall dimensions of the mounting plate are 6-3/8 inches by 5-1/2 inches, and the bolt hole pattern is 4-3/8 inches on center for the outer most holes, 3-3/8 inches on center for the...
view full answer... - Is Mounting Hardware Included With The Dutton-Lainson Trailer Jack, # DL22580The Dutton-Lainson Trailer Jack, # DL22580, does come with all the mounting hardware. The mounting hardware that comes with the jack is the Dutton-Lainson Mounting Hardware, # DL22443. It will fit trailer tongues up to 3 inches X 5 inches, so it will fit your trailer securely. The jack has a 12 inch lift and a capacity of 1,500 lbs. I am sending a video link of a similar jack being installed on a trailer.
view full answer... - What is the Diameter of Replacement Pull Pin # DL22454Replacement pull pin # DL22454 is indeed a 1/2 inch diameter pin. It is designed as a replacement for Dutton-Lainson trailer jack # DL22580. A standard hitch pin for 1-1/4 inch trailer hitches also has a 1/2 inch diameter, # PC2.
view full answer... - How Could Jack Handle be Secured to Jack Body so that it Stays Horizontal When StoredSounds like you are looking for a way to keep the handle of the Dutton Lainson jack part # DL22580 horizontal when the jack is in the horizontal, stored position. Most likely you want to this so the handle doesn't drag. This isn't a super common situation so there isn't a specific solution for this but what you can do is use a strap like the part # EM06701 to basically strap the handle to the main body of the jack so that it wouldn't turn down.
view full answer... - Is the Pull Pin Easy Swivel Trailer Jack DL22580 Strong Enough For A 4000lb Trailer?The Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs. # DL22580 you were looking is designed to fit trailer tongues that are up to 3" wide x 5" tall, so this will be perfect for the frame of your trailer. Since the only weight that affects a trailer jack is the tongue weight, and since you only have 450lbs of tongue weight this jack will be plenty strong as it has a 1500lb rating. In addition the dual wheels on the # DL22580 will be perfect for allowing you...
view full answer... - Trailer Jacks Manufactured in the USAThere are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
view full answer... - Availability of Trailer Swivel Jack with Pneumatic TiresIf the tongue weight of your trailer is less than 500 lbs, the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211 might be a good choice. The jack swings up next to the trailer frame so it'll be out of the way of your truck tailgate and the jack features two pneumatic tires. This is the only jack we offer with pneumatic tires. If you click the provided link, you can see a demonstration video of the jack. The wheels on the jack are actually driven by one of the crank handles on...
view full answer... - Can Dutton Lainson Trailer Jack # DL22580 Fit Shorelandr TrailerYes, due to the various ways the mounting bracket of the Dutton Lainson jack part # DL22580 can install I am confident it will easily work on your Shoelandr trailer.
view full answer... - Who Manufactures etrailer Round/Wheeled Swivel JackThe # e79CR is manufactured by MaxxTow and is made in China. If you're looking for a USA made alternative I recommend the Dutton-Lainson # DL22580. This has a 12" lift, the same 1,500 lb capacity, and dual wheels. It uses a bolt-on installation and fits square tongues up to 3" x 5".
view full answer... - Replacement Jack for Ranger Boat Trailer With Dutton Lainson 203960CWhat you have there is a Dutton Lainson jack. There is no longer a direct replacement jack, but you can use the # DL22580 which will be an upgrade. This is a swivel jack with a 1,500 lb capacity and 12" of lift. This has dual wheels for easy maneuvering and a bolt-on installation.
view full answer... - USA Made Swivel Wheel Trailer Jack for Use in SaltwaterThe Dutton-Lainson Swivel Marine Jacks are manufactured in the USA. These include the # DL22580 and the # DL22800 1500 lb swivel jacks. These are both galvanized steel which will do a great job fighting saltwater corrosion.
view full answer... - Dimension of Wheels on Dutton-Lainson Easy Swivel Jack DL22580I can help you find the measurements you need on the Dutton-Lainson Easy Swivel Jack. I was able to go out to our warehouse and measure that the dimension from outside to outside of the wheels is 4-3/4 inches. There is also a bolt that connects the wheels to the jack that sticks out further than that wheels do, that measures 6-1/2 inches from end to end. I have attached a few images to better show you what I mean. I have also linked a video demo for you to check out.
view full answer...
- Recommended 1,200 - 1,500 lb Side Mount Boat Trailer Jack Made in USAThe only side mount trailer frame jacks made in the USA we currently offer are from Dutton-Lainson such as the Pull Pin, Easy Swivel Trailer Jack part # DL22580 which has dual wheels for easier operation. It also has a 1,500 lb weight capacity with zinc plating for use on boat trailers. I have attached a full list of our Dutton-Lainson side mount jacks below as well.
view full answer... - Dimensions of Wheels and Bolt on Dutton-Lainson Replacement Dual Poly Wheels # DL22441I contacted the engineering team at Dutton-Lainson to obtain the precise wheel and bolt dimensions. The wheel diameter for the DL Replacement Dual Poly Wheels, part # DL22441, is 6 inches. Each wheel measures 1.94 inches wide. The supplied mounting bolt measures 6 inches long and 0.5 inches in diameter. I have attached a brief video to help illustrate this part and its dimensions. I also provided a photo of this part with the various dimension indicated.
view full answer...
- Recommendation for a Trailer Jack with Dual Wheels for Pop-up Camper with Off Road PackageA trailer jack with dual wheels such as # FXPD15L are generally easier to move around on different types of terrain. I actually recommend a Dutton-Lainson swivel jack # DL22580. It also has dual wheels. It features 12 inches of lift, fits up to 3x5 inch frames, and is higher quality with a much better warranty (3 years). I have linked a video review of this jack for you.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
10/19/2023
I just checked our site, and I deeply apologize for this information not being available. I have sent your information over to our updaters team for them to look into this information and get it added to the site.