Add a wheel to your Dutton-Lainson A-frame jack for easy trailer maneuvering. Fits Dutton-Lainson jack models 6670, 6670B, 6671, 6671B, and 3670B. Polypropylene construction resists flat spots and cold weather cracking. Quick-attach pin is included.
Features:
Specs:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the removable wheel and pin for an A-frame trailer jack. This wheel assembly attaches to the bottom of your round trailer jack and allows you to easily maneuver and position your trailer. The unit will swivel 360 degrees for easy maneuvering of your trailer and it's going to feature a capacity of 1,250 pounds. The removable wheel fits A-frame jack models, 6670. Now these are from Dutton-Lainson, 6670B, 6671, 6671B, and 3670, but this can be used on other jacks as well. It does come with the quick attach pin for easy installation and removal. The housing on the unit is made from a steel construction.
It's going to feature a zinc tough plate finish to resist rust and corrosion. The tube right here has an inside diameter going across, inside edge to inside edge is 2". Then I also took a measurement from the bottom of that tube to the center of the pinhole and got a depth measurement of 1". So this is designed to fit jacks that have 2" diameter inner tubes and again, from the center of that pinhole to the bottom of the tube on the inside has a depth measurement of about 1". Now the diameter of the actual wheel's around 6" and it's going to give us a width measurement of around 2" wide and the product is made in the USA. That's going to do it for today's look at the removable wheel with pin for A-frame trailer jacks..
Average Customer Rating: 4.9 out of 5 stars (38 Customer Reviews)
Add a wheel to your Dutton-Lainson A-frame jack for easy trailer maneuvering. Fits Dutton-Lainson jack models 6670, 6670B, 6671, 6671B, and 3670B. Polypropylene construction resists flat spots and cold weather cracking. Quick-attach pin is included.wheel was prefect size and hole was in proper location. Took a couple of minutes to install. Only downside is there is less ground clearance than with the skid. But I will accept that tradeoff. Trailer can't be modified for swing up trailer jack like my boat has.
Removable wheel works as advertised. Dimensions were as specified the narrative. the shipping from MO was quick and was delivered by UPS a day earlier than projected.
I bought an utility trailer for $1300 from a local hardware store you would like to think the caster wheel come with it. I turn to etrailer and you had what I need and you ship it fast! The wheel is built very well, thank for the follow up e mails.
Tracy B - 06/17/2017
The removable wheel for A-Frame trailer jacks works as specified, quality and performance meet our expectations. The price was a great value for such a quality product. Delivery was very timely. The hard and strong wheel material was otherwise hard to find. The wheel with 2000 lb capacity attaches to our front A-frame trailer hitch's jack and helps us to move our 20 foot covered trailer (toy hauler) around, especially to line up easily with our RV.
Works great
The ordering process was easy with curtious and knowledgable staff. Product shipped promptly. On arrival it fit & functioned properly. This product has been a great purchase at a very reasonable price. Have purchased other products and will continue to shop etrailer thank you.
Ron B - 03/08/2018Works as advertised.
I bought a trailer at a local farm supply store with an A-frame Jack and with the skid plate on the jack it was too hard to move. I ordered the Jack wheel from etrailer and it came approximately a week later. The wheel was very high quality and fit perfectly in my trailer Jack after removing the skid plate. It works perfectly.
I bought this wheel sight unseen, it is really heavy duty and should be able to push trailer to any position with no problem at all. I drilled a hole thro jack stand for the pin, and the wheel fits tight around the jack stand. Perfect for my use.
The wheel was heavy duty and stable but it's interface with the existing jack stand wasn't very stable. That is due partly to my jack stand but also the short height of the adapter on the wheel.
After careful measuring I used this item to replace a fixed jack wheel from the same manufacturer. I needed better clearance over some uneven ground in my yard. I sawsall-ed the existing wheel off, drilled holes in the jack shaft and installed this on my trailer. Now I can remove it when necessary and get at least 6 inches extra ground clearance. Great...just what I needed.
The product was shipped fast & undamaged. what we all like!Wish I could get all service from enternet this way,just want to say thank you much,to all employers at "etrailer!" P.S.the trailer jack wheel just what I wanted Kansas customer
a very good product. My last trailer I purchased I bought a similar wheel with the trailer and when I got home I found it would not fit. My new trailer I got my wheel from etrailer and it fits perfect and rolls very nicely.
Excellent product that is American Made to boot!!! This makes moving my mobile offset smoker (that weighs over 1k pounds) in and out of my garage a breeze. My only gripe is not buying it sooner. Also, the diameter of this wheel is 6 inches. I mention this because at the time of my purchase this bit of info was not available on the product information page. Which I didn't quite understand as wheel size is perhaps the most important detail.
This item is fantastic it allows me to move my custom motorcycles in enclosed trailer around by hand and I would recommend this to anyone who has a 2 inch wide diameter need for something to be moved by hand.
It has worked very well for me and been very good and useful. Well made. Just what I needed.
The construction of this wheel is amazing. It works like the more expensive ones, and is a real value.
excellent part stronger than original.Fast shipping/thanks-it is difficult to buy a part without seeing it in person/but your part exceed my expectations .I will come back for future needs..
It has a bigger wheel than other wheels that I have had.
Make sure to measure the inside diameter of the jack you are ordering this for. Otherwise, it will be too big. This is a very strong, well made caster.
Exactly what I ordered
Thank you
WORKS JUST FINE NOW I CAN MOVE MY TRAILER AROUND.
Excellent product and process for purch ase
Website was great with enough options with details to make quikc selecdtion. Placing order and delivery was complete, on time and accurate.
PRODUCT DELIVERED AS PROMISED /GOOD QUALITY/ GOOD VALUE RETURN CUSTOMER
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.