bing tracking image
  1. Trailer Jack
  2. Dutton-Lainson
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Bolt-On
Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs

Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs

lowest price pledge
Our Price: $235.58
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 25 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant round swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip. Lowest Prices for the best trailer jack from Dutton-Lainson. Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs part number DL22335 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (61)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Dutton-Lainson Trailer Jack

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 12 Inch Lift
  • With Wheel
  • Dutton-Lainson

Corrosion-resistant round swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.


Features:

  • Round marine jack lets you raise and lower your boat or recreational trailer
  • Convenient swivel-pin lets you pivot jack 90 degrees
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Wide plastic wheel lets you easily move your trailer
    • Tread pattern creates an off-road look
    • Inner tube rotates with wheel allowing you to move in any direction
  • Deluxe, all-black sidewind handle has cushioned grip
  • Drain holes at bottom of inner post prevent water buildup
  • Zinc TUFFPLATE finish protects components from corrosion
  • 4-Bolt plate lets you easily mount jack to trailer frame
    • Charcoal powder coat helps prevent corrosion
    • Mounting hardware included
  • Charcoal gray color
  • Made in the USA


Specs:

  • Application: trailers with a frame height from 3" to 5"
  • Bracket height (from bottom of wheel to top hole of bracket):
    • 16-5/8" Retracted
    • 28-5/8" Extended
  • Lift: 12"
  • Lift capacity: 1,500 lbs
  • Wheel dimensions: 8" diameter x 3-5/16" wide
  • Pull pin diameter: 1/2"
  • Tube diameter: 2-1/4"
  • Handle radius: 6-1/8"
  • 3-Year limited warranty


22335 Dutton-Lainson DLx-P Round Swivel Tongue Marine Jack - 8" Diameter Wheel - Bolt On - 12" Travel - 1,500 lbs

Item # DL22335





Video of Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dutton-Lainson Round Swivel Jack Review

Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the Dutton-Lainson premium pivoting tongue jack. This jack is going to help you to be able to jack up your trailer to get it onto your vehicle and store in a nice, convenient stored position when you're traveling.Something you're going to notice right away when you see this jack is it's going to have a more aggressive look to it than your standard jack that might come factory on your trailer. It's going to have a nice dark charcoal gray powder coat finish that'll be tough enough to withstand any dents or scratches that might come to it. The wheel is going to be eight inches in diameter, so it's going to be more than tall enough to be able to roll over those larger objects that might be in your yard. As well as it's going to be three inches wide so that when you're rolling your trailer through your yard it's not going to sink down into the grass as easily as those two inch wide wheels.The jack is going to have a 1,500-pound weight capacity and a travel of 12 inches.

The handle itself is going to be long enough to be able to grip onto it and jack up that 1,500 pounds. The handle's going to be a rubberized material so it's going to provide a superior grip in addition to these four grip knobs to be able to fit your fingers in there to crank your trailer up.Now when it comes time to put your jack in the stowed position they have a nice rubberized sleeve over top of the pole handle here. You'll pull out on that knob and then fold it until it clicks into place. When in the stowed position your handle is going to hang down so I would recommend, we have a little strap, just to pull it up into the horizontal position and strap it to the frame of your trailer just so you don't have to worry about it running into anything.Towards the top of the jack is going to be two grease zerks to be able to conveniently grease up the gears that are on the handle on the inside to be able to give you a nice smooth operation when you need to use your jack. This jack is going to be able to be mounted to a three to five inch trailer tongue.Now that we've gone over some of those features, let's go ahead and show you how easy it is to get in place.

Whether you're replacing a damaged jack like we have here, or just replacing a old jack, you'll need to remove your old jack first. If you have a swivel jack its most likely going to have a snap ring. So here we have a pair of snap ring pliers, we'll pull that ring off, set that aside, now we can take our jack. Now we can get our new jack in place, take our hardware, thread our bolts through and slide on our brackets. Now we can slide our lock washers on followed by our nuts.Now with everything in place, we can go ahead and tighten down our hardware.

Then you can go ahead and test out your jack to make sure everything's working properly. Once you have everything tightened down, you're ready to load up your trailer and hit the road. With that being said, that's going to do it for our look at the Dutton-Lainson trailer jack.


Customer Reviews

Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs - DL22335

Average Customer Rating:  4.8 out of 5 stars   (61 Customer Reviews)

Corrosion-resistant round swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.

by:

This was disappointing out of the box. First, this will not fit on a Magic Tilt aluminum trailer unless mounted sideways. The backing rails, which are properly sized, are five hole, but the face is four, and mounting sideways means bolts won't be flush with top and/or bottom of frame. This is clearly not the way this should be done, half the mount that should be against the frame is against nothing. Secondly, and most disconcerting, are the four carriage bolts that hold the mount swivel are about 1/16" too long, preventing the mount from laying flush against the trailer frame anyway. So I had to make a trip to the hardware store for replacement hardware, disassemble and reassemble with the shorter carriage bolts. Both of these issues just seem frustratingly odd. This replaced a $50 TS jack that salt did in after five years and is no longer made. The D-L has a much smoother motion, but after mounting it has the same amount of play when extended as the cheaper jack.
One last note, this was packed loosely in a large box. Some of the paint was already scuffed off the part that holds the wheel, so I'm not optimistic about the protection this "Tuffplate" finish offers if cardboard can remove it. The bag of hardware was still stapled, but two of the mounting bolts were loose and one of the split washers was just missing. I used a spare nylon locknut on that bolt.
It should not be this hard to find a decent, hassle-free jack at a decent price.
Pics of longer stock bolt beside shorter replacement, potential mounting gap that would cause, and jack mounted sideways on frame.


Comments
I will have our Customer Service team reach out to you. This jack is meant to work with trailers that have a frame height of 3 - 5 inches. The jack uses a 4 bolt plate to let you mount the jack to the trailer frame. You will want to make sure you are mounting it in a location along the frame where it not interfere with the operation of the trailer. I recommend watching the video that we have on the jack and watching from mark 1:30 to see where we mounted it to the frame.
-- Etrailer Expert Jenny N - 03/09/2022


by:

You definitely get what you pay for. This Jack is built extremely well and works flawlessly.




by:

I was looking for a heavy duty wheel jack and something I could easily relube since I put my trailer in the water frequently. I am very satisfied with this jack, it's easy to crank and very sturdy and has 2 zerk fitting to regrease. It is nice to be able to easily lube the screw. Most jacks only have a way to get to the top gear for greasing. I did note the jack mount position places the tongue height a little tall if you have a low vehicle or hitch. Luckily I moved to a truck and now it's works nice. However, would be nice to have ability to adjust height of the jack. I think Fulton is the only one that offers that, but the jack was not heavy duty enough.




by:

I think this trailer jack is the best.




by:

We have a single axle trailer for our 19' fishing boat. It works good. We could have probably gone with an even bigger wheeled jack since we have to roll the boat around on the trailer a lot.




by:

It broke after about a month of use.


Comments
Customer Service will contact you about the 3 year warranty that is covered under normal use.
-- Etrailer Expert Sierra K - 01/20/2022


by:

Easy installation, great gear reduction, smooth pivot. Just what I was looking for for my sailboat. Thanks!


Comments
Its worked great. Continues to easily raise and lower my sailboattrailer. Boat+trailer ~2200 lbs.
Gary D - 06/01/2021


by:

Good trailer jack. I have it on a bunk pontoon trailer and I needed a high lift so I could get the trailer to ride level and this jack has it. Also the wheel does not spin around when cranking down witch I like also jack has grease ports




by:

Easy to install. Works flawlessly. Nice, strong jack and the wide wheel makes it so much easier to roll back and forth in the garage. Worth every penny!




by:

So much better than the factory jack. Great investment.




by:

Gr8 help from e trailer, gr8 products. Love you guys.




by:

Great quality product and definitely feels well built. The wide wheel is much better at not sinking into soft soil the way my last jack did.




by:

Great Product,really heavy duty jack with a very nice handle and large wide wheel.
Would purchase again if need another. etrailer.com shipped fast and came undamaged.




by:




by:




by:




by:




by:




by:

Review from a similar DLx in Trailer Jack


This trailer jack is just what I needed. The range is fantastic, the handle is comfortable and raising and lowering the boat trailer has never been easier




by:

Review from a similar DLx in Trailer Jack


I bent my boat trailer jack accidentally and needed a new one. So etrailer was there for me with this very nice Dutton-Lainson version similar to the one I had. Works great, very smooth gearing, and it looks good on my boat trailer too.




by:

Review from a similar DLx in Trailer Jack


Perfect fit. Much better jack than the OEM.


Comments
Jack is awesome! Supports my boat very well. Extremely easy to roll in and out of my garage.
Randy - 04/16/2021


by:

Review from a similar DLx in Trailer Jack


As described. Was looking for something heavy duty and this worked!




by:

Review from a similar DLx in Trailer Jack


I like this jack I’ve had many other jacks this one works smoothly better than others




by:

Review from a similar DLx in Trailer Jack


I was originally trying to find something that would bolt upto the Shelby welded bracket. I'm so glad I went with this unit instead. It's heavy duty, large wheel for easy maneuvers, greese fittings, easy up like butta! The black color is different and goes well with my red Stingray. The customer service is over the top!




by:

Review from a similar DLx in Trailer Jack


This jack is solid as a rock. Totally recommended. I did remove the wheel and just screwed the bolt back into the bottom of the tube for better clearance coming and going into steep driveways.



25
61
Show More Reviews

See what our Experts say about this Dutton-Lainson Trailer Jack



  • What Is the Bolt Pattern Dimensions of the Dutton-Lainson DLx-P Round Swivel Jack
    The mounting plate on the Dutton-Lainson Round Swivel Jack part # DL22335 has bolt holes which are 7/16" diameter. The bolt holes are spaced 5-1/2" apart on center from top to bottom and then in 1" increments apart working your way from the bottom to the top. If your trailer frame does not exceed 3" wide x 5" tall then the jack will bolt right on.
    view full answer...
  • Dutton Lainson Trailer Jack For Ranger Trail Boat Trailer
    Here is a Dutton-Lainson Round Swivel Jack # DL22335 it has an extra wide 3 inch wheel so it'll be easy to move around in any terrain and it will swing up to get out of the way. It fits frame sizes from 3 inches to 5 inches and has a 1,500 lb capacity. Check out the video of Jake using it to get a closer look!
    view full answer...
  • Dimensions of Dutton-Lainson Round Swivel Jack DL22335
    I have included a dimensional drawing of the Dutton-Lainson Round Swivel Jack # DL22335 that shows the overall extended height of the jack at 40-5/8" tall. This measurement is from the bottom of the wheel to the top of the jack when extended.
    view full answer...
    Image 1 for
  • Recommended Replacement Swivel Jack for Tracker Boat Trailer
    Since you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton # F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved surface because the caster will be more difficult to turn. I'd recommend the US made # DL22335 Swivel Jack from Dutton-Lainson. The jack has a 1500 lb lift capacity which is more than needed for the pretty light tongue weight of your Tracker Pro Guide,...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video by:
Chris R
Employee Matthew S
Written by:
Matthew S
Employee Jacob H
Installed by:
Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.