Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson
(133 reviews)
Price: $111.29
In Stock
Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson
Item # DL22560
Retail:$142.55
Our Price: $111.29
You Save: $31.26
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (133)
- Q & A (0)
- Photos
- Why etrailer?
Dutton-Lainson Trailer Jack - DL22560
- Side Frame Mount Jack
- 0 - 1000 lbs
- Sidewind Jack
- No Drop Leg
- Bolt-On
- Swivel Jack - Pull Pin
- 12 Inch Lift
- With Wheel
- Dutton-Lainson
This Dutton-Lainson trailer jack is a back saver when it comes to hitching and unhitching loaded trailers. Heavy-duty D-L tongue jacks reduce the effort required to maneuver a loaded trailer into hitching position or to remove from a vehicle.
Features:
- Easy to install:
- Bolt on mounting
- Can be mounted in a variety of ways on various sizes of trailer tongues
- Bolt on mounting
- Smooth operating
- Made from heavy-gauge steel for strength and durability
- Enclosed outer tube retards sand and dirt from contacting miter gears and heavy-duty Acme screw
- All mounting hardware included
- Floating miter gears allow for proper clearance and easier operation
- Maximum maneuverability from offset swivel caster assembly
- Zinc plated TUFFPLATE finish for longer life
- Ergonomic hand grip
- Made in the USA
Specs:
- Capacity: 1,000 lbs
- Lift: 12"
- Fits square tongues up to 3" x 5"
- Measurement from bottom of wheel to center of bracket:
- Retracted: 15-5/8"
- Extended: 27-5/16"
- 3-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
22560 Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1,000 lbs. by Dutton-Lainson Model 6709
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson - DL22560
Average Customer Rating: 4.8 out of 5 stars (133 Customer Reviews)
This Dutton-Lainson trailer jack is a back saver when it comes to hitching and unhitching loaded trailers. Heavy-duty D-L tongue jacks reduce the effort required to maneuver a loaded trailer into hitching position or to remove from a vehicle.by: Rhace09/23/2022
Arrived quickly
Easier to install than I thought, I didn’t box it in
Wish I got a big wheel or double wheel
by: JIMMIEK05/02/2019
My new Dutton-Lainson Tongue Jack from erailer has eliminated the potential problem of receiving an unwanted tailgate ding. This unit is heavy duty with a 1,000 pound tongue rating - not some $35 throw-away unit that you usually get from Big Box stores.
Installation on my new Karavan Utility Trailer was easy enough, taking no more than 30 minutes, and that's without even reading the installation instructions!
The D-L tongue jack provides trailer tongue quick drop, as well as high quality worm gear internals.
Thanks etrailer! Satisfied Customer
by: Danny 10/27/2022
Ordered Tuesday delivered Thursday.
Works as it should, quality product.
by: Lee 08/19/2022
exactly what I was looking for
by: Jo07/28/2022
This is a great product and easy to use.
by: Philip02/20/2019
Replaced my 20 yr old fulton jack with your dutton. Exact replacement didn't have to use any of the hardware, just bolted it in place. Now my shore lander boat trailer should go another decade or two. Ready for the fishing season here in Michigan, thanks so much I'll make sure to tell all my fishing friends what a great service you offer.
Comments
Excellent, absolutely no complaints.
Philip - 02/21/2020by: Richard06/24/2020
Placed on a 16' Aluminum boat/Trailer. This was the only trailer jack I could find which would raise the bow of the boat sufficiently to place the trailer coupler above the hitch ball. I have a tongue weight of about 150 pounds and arthritis in my back.
Pros:
It seems to be made of quality materials. Rustproofing seems to be robust. Does raise the coupler at least 5 inches higher than the previous hitch. Installation is simple but........
Cons:
There are no installation instructions except "refer to the drawing", which is a blow-up view of all the parts of the jack. There is no step 1, step 2, etc. Unfortunately, there are a few parts that could be installed incorrectly. It's easy to put together once you figure out what goes where.
Gets 5 stars if it had reasonable assembly instructions.
by: Bryan03/21/2022
Sturdy product. Easy install. Simple order/receiving process. Highly recommended.
by: johndigbydog07/13/2015
This jack seems ok, for the money I DID expect to find a grease fitting on the crank shaft, not just a "hole" for grease.....How am I supposed to get the grease in? also, the worst instructions for assembly I have ever seen, it referred to viewing a diagram which had multiple other units pieces displayed, I guessed on how to assemble it with hit and miss and I had to disassemble it a few times before I got it right but finally I got it mounted....I guess one is expected to buy the more expensive version made by Fulton to get better quality.....I might have bought that model but there was no way to secure it from theft which to me seemed quite possible for a product costing that much......live and learn!
by: Rob D07/22/2013
The trailer jack I ordered was a direct replacement for my existing one. It did come with all of the hardware to make it a universal fit for any trailer. The service was great and product shipped fast. I even received an email after parts arrived ensuring that my order was correct. I would recommend Etrailer to anyone needing towing or trailer parts. A+ service.
by: Keith S03/28/2017
Great strong trailer jack. I use on the trailer that I haul my ATV with. Makes moving the trailer from storeage shed to truck a breeze. Now I don't have unload the ATV to move the trailer into storage. Ijust let the ATV on the trailer and roll it back in to the shed.
by: Jeremy 10/08/2020
Item was exactly as described, used this jack as a replacement for a 1991 Shoreland’r boat trailer with Profile 2000 winch stand
by: Jim09/14/2015
I was not able to find a exact replacement for my trailer jack until I found Etrailer.com. Good price, fast shipping, great product.
by: For Debbie H.04/09/2015
I couldn't find the trailer jack I needed until I went to eTrailer.com and spoke to Debbie H. She listened to my problem and suggested two different jacks for me to look at, I choose the second one realizing that the only difference in the jack was that the manufacturer of that Jack raised the lifting wieght by 200 lbs. Debbie H. Is a wonderful person and she is greatly knowledgeable of her companies inventory... That Lady knows her stuff!!!
Chuck T.
Ocala, florida
by: Chris 05/14/2020
Solid product, easy install. Took the extra steps of spray painting the pieces and adding a smidge of grease to the moving parts. Would buy again!
by: Shoalwater07/22/2015
We ordered the wrong item #. They immediately issued a UPS return ticket and helped us get the right item ordered. It was delivered quickly.
The trailer jack is exactly what we needed.
We will order from here again.
Great products & Great service!!
by: Dennis 06/21/2020
I should have replaced this trailer Jack a long time ago
Easy installation and I am able to move my trailer wherever I need to
thumbs up
by: Dan H.05/12/2014
Great product and made in the good old U.S.A. Replaced similar jack after 10 years of use. Packaging was the best I have ever see. Delivered in strong shipping box with fast shipping.
by: Rebecca 05/15/2020
We were one hundred percent satisfied with the product and the service! The jack was an exact match to the one I had! Shipping was sooner than expected. I would recommend this company! Thanks!
by: Mike03/25/2011
Well made high quality product. Replacing the garbage jack that originally came with my pwc trailer. Spend the extra cash, you'll be thankful when you see it.
by: Stan J01/30/2020
Very hard to install the ring clip. Better instructions and or a tool to install the ring would be helpful. Otherwise, the construction is sturdy and well made
by: Jarrod 06/24/2020
Replaced an old jack on my trailer for my searay 190. This worked great
by: John 07/28/2020
Just what I ordered...brand new in box, all hardware included and bolted right on. Exact replacement! Thanks!
by: James 07/10/2020
Perfect fit on my Sea Ray profile 2000 trailer
by: John Mitchell08/30/2011
Fast shipping and great product. picture did not show the mounting hardware and I did not need it.
25
133
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Will Dutton Lainson Swivel Trailer Jack DL22560 Fit Existing 2-1/2 Inch Diameter Snap Ring MountThe Dutton Lainson Pull Pin, Easy Swivel Trailer Jack # DL22560 referenced in your question is designed to fit a 2-1/2 inch diameter weld-on mount like what you have installed on your trailer. This jack will work great with your existing hardware and will provide a weight capacity of 1,000 pounds. It has a total lift of 12 inches and an extended height of 27-5/16 inches. It also is made from heavy-gauge steel for strength and features a zinc plated TUFFPLATE finish for a longer life. I...
view full answer... - Dutton Lainson 1,000 lb Sidewind Trailer Jack RecommendationThe perfect replacement jack that you would need would be the Dutton Lainson Sidewind Jack part # DL22560 that you referenced. It will bolt right up to your mounting bracket and has 12 inches of lift. Check out the review video I attached for this jack as well.
view full answer...
- What is the Extended and Retracted Jack Height for Dutton-Lainson 1K Swivel Jack DL22560That depends on the trailer that jack # DL22560 is installed on. I can tell you that when mounted this jack measure 27-5/16 inches from the center of the mounting bracket to the bottom of the wheel with the jack fully extended. When fully retracted it is 15-5/8 inches. Trailers are all different heights with different frame dimensions so you have to go by the extended/retracted measurements.
view full answer... - Mounting Pull Pin, Easy Swivel Trailer Jack part # DL22560 on Waverunner Trailer 2 x 3-inch TongueThe Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson, part # DL22560, will fit on tongues up to 3 x 5 inches. You should have plenty of space for this jack. It swivels up when not supporting the tongue and has a corrosion-resistant finish that is great with applications around water, like with your Waverunner trailer.
view full answer... - Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack for 6,200 lbs Boat TrailerThe trailer jack is responsible for supporting just the tongue weight of the trailer, which is typically around 10 to 15 percent of its total weight. A 6,200 lbs trailer would have a tongue weight between 620 and 930 lbs. The Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 6" Wheel item # DL22560 would be a perfect jack for your boat trailer.
view full answer... - Replacement Dutton-Lainson Trailer Jack 22457 or 22560I spoke to my contact at Dutton-Lainson and was able to confirm that the Pull Pin, Easy Swivel Trailer Jack with 6" Wheel part # DL22457 for 10" lift or part # DL22560 for 12" lift is a direct replacement for the jack you have on your trailer now. For future reference, the part number of the jack is a set of three digits on the black plastic handle. If you add "22" to these digits that will give you the full part number of the jack. The jack you have now should have either "457" if you...
view full answer...
- Trailer Jack Recommendation for Trailer with Swivel Dutton Lainson Jack InstalledBased on the picture you submitted the matching trailer jack we have to what you have is the Dutton Lainson part # DL22800. I attached an install video for you to check out as well. At the very worst you may have to use the bolt on brackets that come with this jack, but it looks like this would bolt right up to the bracket you have on your trailer.
view full answer...
- Replacement Snap Ring for Dutton Lainson Swivel JacksYes, we have replacement snap rings for Dutton Lainson jacks like the # DL22560 that you referenced with the part # DL22672.
view full answer... - Replacement Trailer Jack For Boat Trailer That Has Welded Snap Ring Jack Attachment PointThe Pro Series Snap-Ring Swivel Marine Jack # PSEJ10000101 is going to be the closest equivalent to what you currently have. It is rated for 1,000lbs and has 10" of lift for either a 13" retracted height or 23" extended height from the center of the pivot point on your trailer. It also uses a 6" wheel to allow the boat trailer to easily be moved for connecting to your vehicle or positioning the trailer in storage. You will be able to remove the jack from the bolt on mount and slide this...
view full answer... - Replacement for 1,000 lb Pro Series Trailer Jack That is Made in the USAThe Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22560 is similar to, but better than, the Pro Series # PSEJ10000101 jack that you currently have, plus it's made in the USA. This is a solid trailer jack choice and it has received some really great feedback from those who have used it. I have attached a review video for you to check out as well as a link to our selection of Dutton-Lainson trailer jacks (all made in the USA) in case you wanted...
view full answer... - Swivel Trailer Jack that Can Fit on 2.5 inch Snap RingThe Fulton Round Snap-Ring Swivel Marine Jack part # FTJ12000101 has the same 2.5" snap ring dimension and will work out for you as a direct replacement.
view full answer... - Replacing Swivel Jack with Drop Leg Jack on Boat TrailerI have a solution for you, but we do not carry an adapter like you mentioned to mount a square tube jack to your existing winch stand. The best option for your set-up may be to use a jack like the Pro Series Square Jack with Footplate # PS1400850383. Then, using a sheet of metal drill the bolt holes to match the existing holes in your trailer. Another option is to try and find a drop leg jack that matches the mounting dimensions on your trailer. One option for a drop leg jack is the...
view full answer...
- Replacement Jack Handle for 1,000 Pound Dutton Lainson Trailer JackWe do carry replacement handles for Dutton Lainson jacks made after 1996. For the 1,000 pound side wind jacks like # DL22560 you will need replacement handle # DL22446. But it sounds like you may need to replace the gears as well. If a gear stripped out or broke then for replacement gears for the same jack use # DL22437. If the handle or gears broke due to being overloaded then I recommend going with a higher capacity jack. For example jack # DL22800 is rated for 1,500 pounds. I have included...
view full answer... - Where Is the Round Swivel Marine Jack 1,000 Lbs MadeThe Round Swivel Marine Jack part # MJ-1206B is made in China. If you are looking for a domestic alternative, that would be the Pull Pin, Easy Swivel Trailer Jack part # DL22560.
view full answer... - Replacement for Dutton-Lainson 203925B 1000 lb Capacity Swivel Trailer JackThe direct replacement for your Dutton-Lainson 203925B jack would be part # DL22560. According to Dutton-Lainson, the jack would indeed be compatible with your existing mounting plate. I've linked to a product demonstration video featuring the # DL22560 jack.
view full answer...
- Replacement for Older Bolt-On Bulldog Swivel Trailer JackThanks for the photos and from that it looks like you need a pull-pin swivel trailer jack, and you're right that the Bulldog Rack-and-Gear Jack # BD169201 is not one of those. There are few 750 lb jacks but going over that certainly isn't going to be a problem so the only question is the height you need. That's not something I would be able to tell you so you should take a look at the linked help article on trailer jacks for how to determine the right height you need. After that you also...
view full answer...
- Trailer Jacks Manufactured in the USAThere are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
view full answer...
Do you have a question about this Trailer Jack?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer jack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Patrick B
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.