2002 Dodge Ram Pickup Truck Bed Extender

As you can see in the diagram I provided, the tilt is adjustable up to about 45°. The tilt mechanism has a pin that can be used in two different positions to allow a roughly 15 or 30° degree tilt or the pin can be completely removed for the…

Hey Deb, You could just remove the load stops for the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar #RTL002 and clamp on one kayak carrier like the Rhino-Rack Kayak Roof Rack w/ Tie-Downs #S512-S512X to the crossbar and the other to the…

The #Y01149-1150 is the the #Y01149 paired with the Height Extension for Yakima LongArm #Y01150. The Erickson Big Bed Load Extender #EM07600 you purchased has the highest capacity at 400 lbs.

For a truck bed extender with a bar wide enough to carry and haul something that is 38 inches wide you could use the Flint Hill Goods Truck Bed Extender - 2" Hitches #FHG89ZR which has a load bar that extends up to 48 inches wide.

The Yakima LongArm with Extender, part #Y01149-1150, can be used as a lift-assist like the Rhino-Rack T-Load, part #RTL002, in theory. However, the setup is not ideal or one I recommend. The advantages the T-Load has are the loading strap and the two…

Without the extension piece installed the Yakima LongArm Bed and Roof Load Extender #Y01149-1150 sits 9" out and 46-3/4" up from the center of the hitch pin hole (see attached photo). The extension piece adds between 7-1/2" and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your Thule truck rack aero bars, the Thule DockGlide #TH896 is better if you want to slide your kayak from the back and utilizes felt pads to protect your boat and ease loading. I've attached a video to assist. The contrast is the Thule…

Hello Mike, thanks for reaching out. We do offer a trailer hitch for the 2025 Toyota Grand Highlander Max Hybrid Platinum. For that I recommend the following: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"…

Yes! You can use both a kayak rack and a truck bed extender on your 2021 Jeep Gladiator with the Trail Rail system. Since the Access Lorado Soft, Roll-Up Tonneau Cover #A53VR leaves the stake pockets completely open, you will be able to install a way…

Hey Rick, I wish I could say yes a Thule locking hitch pin would work with your Rhino Rack T-Load part #RTL002 but they are different sizes. The good news is the T-Load comes with a lock for the hitch pin so you won't need anything else.

The roller part #MAL52VR is 2 inch in diameter and has a 375 lb capacity when used in the upright carrier part #MAL32VR.