Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
(59 reviews)
Price: $556.39
In Stock
Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
Item # RP66131
Retail:$818.11
Our Price: $556.39
You Save: $261.72
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (59)
- Q & A (0)
- Photos
Reese Weight Distribution Hitch - RP66131
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Fits 2 Inch Hitch
- WD Only
- Reese
- Electric Brake Compatible
- No Sway
High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank and hitch ball sold separately.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a more level ride for both tow vehicle and trailer
- Trunnion spring bars are hot rolled and tapered for superior strength and flexibility
- Bars flex appropriately over uneven terrain for a controlled, even ride
- Curved ends are designed for use with dual-cam sway control (RP26002 - sold separately)
- Adjustable spring-bar tension - just switch links in lift chains to fine-tune
- Desired tilt is easily achieved with serrated-washer design - no more piling on washer after washer
- Forged, raised ball platform on head eliminates need for raised hitch ball
- System includes head assembly, lift brackets, trunnion spring bars, lift chains, and all necessary hardware
- Adjustable shank and trailer hitch ball sold separately
- Ball requires threaded shank with 1-1/4" diameter
- Adjustable shank and trailer hitch ball sold separately
Specs:
- Tongue weight: 1,000 lbs - 1,500 lbs
- Gross towing weight: 15,000 lbs
- Fits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems
- Lift-bracket positioning: mount about 30" back from hitch ball
- Requires approximately 5-1/2" of space along trailer frame
- Optional mounts (sold separately) that take up less space on a trailer frame are available
- Will not fit trailer frames wider than 2-1/2"
- Requires approximately 5-1/2" of space along trailer frame
- Limited lifetime warranty
| Included w/ RP66131 | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
|
|
|
Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight-Distribution System
The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.
Unique Features of Reese Trunnion-Bar Weight Distribution
The easy-to-use, serrated washers on the Reese system make adjusting the tilt of the weight-distribution head a snap. This is a huge improvement over the standard pin-and-washer method, which involves piling washers - one on top of another - onto a difficult-to-access pin. The serrated-washer system lets you easily loosen, adjust and tighten a single washer and nut on either side of the head for simple, secure positioning.
The trunnion spring bars of this system slide into the weight-distribution head for quick, easy installation. With a tapered design and hot rolled steel construction, these bars offer superior flex, ensuring a smooth, controlled ride for both your tow vehicle and your trailer. In addition, these specially designed bars have rounded, hooked ends, making them the only kind of spring bars that can function with Reese's active-style, dual-cam sway control (sold separately).
66131 Reese Ultra Frame Trunnion Bar Weight Distribution Hitch without Hitch Bar
Installation Details
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW - RP66131
Average Customer Rating: 4.9 out of 5 stars (59 Customer Reviews)
High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank and hitch ball sold separately.by: John09/27/2023
I use this 1500 lbs WDH with my 14,000 lb equipment trailer and 10,000 lb dump trailer. Previously, I used a 1200 lb WDH.
I just hauled a load of pavers (a gross combined weight of just over 20,000 lbs) with 11,600 lbs on the trailer axles. I had 1400 lbs of tongue weight (used a scale to measure). The one-way trip was traveled on a two-lane highway crossing over five 5,000 ft mountain passes. Excellent hitch performance uphill and downhill through lots of tight curves.
The tension bars are easy to install / remove and they have great ground clearance. If it is necessary to adjust the hitch angle, the fine graduations for different hitch angles make it easy to get the exact angle needed.
Great product!
by: Arizona Slim09/25/2018
I really like the Reese Trunnion style weight distribution. It gives more clearance to the road than round-bar kits.
I appreciate the fact that the bars are available in different spring rates for different tongue loads. I dial my front axle load restoration (FALR) exactly to 100% and having a variety of spring rates makes this possible.
by: Ron11/10/2018
Not a whole lot to say about this product. It's works very well for us without any issue. Only complaint I have is not really product-related: The pipe used for lifting the bars into position is a tad longer than I wish it was. Reason being is that occasionally I need to have that bar completely vertical to get the chain on the trailer prior to lifting. The entire unit sits so low sometimes I have to cheat the system by choosing a link with less lifting power... then do the other side... then come back and to it all over again. Just a hassle and yes, i know I can just cut the bar with a cutoff wheel, but I just have not got to it yet.
by: Dave S.06/23/2017
Items arrived very quickly. Setup instructions were very clear. Would highly recommend Reese WD Hitch for all your heavy towing needs.
Dave S.
6/24/2018
We are about to make our second long haul pulling our 8000lb travel trailer. Our Reese hitch makes all the difference between nail bitting and a relaxed trip. Still 5 stars
by: Dan M.02/24/2014
Excellent web sight, I am a purchasing manager for a manufacturing firm and this sight is one of the best, very easy,
Product was delivered in good condition, one day late due to weather, but I was notified of the delivery change in advance!
Thanks, will be ordering more.
by: Eric M04/02/2012
Works great. Using on a 14000 lb. tag along trailer behind a dually pickup. Takes up the slop in the hitch so the ride is better.
by: Randy 04/06/2018
It was just like it was described. Came in perfect condition, fast delivery, no problems. I'll order again from etrailer.com.... They have what you need and want, beats shopping around all over town and the internet...
by: Jeff B08/15/2013
Customer service was outstanding during the ordering process, hitch arrived as website indicated. Best price anywhere I could find. Thanks etrailer!
by: Paul A12/07/2016
Huge difference over the old undersized hitch
by: Veronica05/22/2016
Very strong. Allowed me to pull an 11,000lb trailer.
by: Steve M06/07/2017
Total on-line purchase. Purchase went smoothly, product arrive quickly and complete. Nice job. Looking to make additional purchases.
by: Bill Dutka03/25/2015
The product came as described in the listing. I'm happy with it overall.
Bill D.
3/31/2016
Perfect, towing a 28 long, 13 3 tall 17k trailer, and no sway or issues at all.
by: Nick 04/16/2021
Quality, Ordering quick and simple quick delivery
by: Daivd rhett01/30/2018
I am still waiting on some back ordered items, but other than that service was fine
by: CP06/07/2017
Great products at a great price.
by: Steven 10/01/2019
Arrived and reasonable time and in good condition
by: Chad E.07/28/2016
Looks real heavy duty. Exactly what I needed.
by: Rodney 08/22/2022
by: Jerre08/17/2023
by: Josh06/01/2021
by: John 07/15/2022
Had these installed by a dealer and drove a few hours to a campsite this spring. Only the second time driving a camper and first time on a major highway. White knuckle ride for the first half hour then realized the camper wasn't swaying or rocking and started to relax. Coming home two days later I started out relaxed and enjoyed the drive....even passed a truck!
by: John02/23/2022
Thoroughly torture tested between 7500 lb camper and 10500 lb trailerable a houseboat. Bought the anti-sway cams separately off [online] due to availability. Combined as a system, this stopped anti-sway and saved my butt during a hard downpour rain and side winds. The cams were the difference in pulling off to get to safety vs laying on the side of road upside down like some 18 wheeliers.
Yes, its expensive. No, you dont buy another one unless you sell it with the camper / trailer.
by: Bill C.04/11/2011
After a slight modification to my trailer (brackets fit a 2.5 inch frame; mine was 3 inches), this hitch fit perfectly and works great. Now I can tow a 3 ton tractor without worrying about putting too much strain on my rear axle.
Also impressed with etrailer.com's service - the hitch arrived much sooner than expected. Will definitely be doing business on this site again.
by: Jake S.03/26/2014
This was my first encounter with etrailer and I have to say it was hands down the best service I have ever received! Really.. And no I don't work for etrailer!!!!!! We use to live in a country where good service was just a way of life. Today, lets face it, service is terrible! But not etrailer.. I placed an order for this product online and selected the normal shipping method by ground. I immediately got the normal email "thank you for your order". But then I got another email from an actual person, George.. George let me know the product was in their distribution facility and will ship in 24-48 hours.. To my surprise, the order shipped the same day and I received another email from a Frank stating they took the liberty of upgrading my shipping to 3 to 5 days express shipping instead of the normal 5 to 7 days at no charge to me! So my response to this was "wow great service thank you!".. Again to my surprise I received an email from a Nikki who thanked me for my positive feedback. On a side note can you believe, they actually put their direct phone with extension along their email address on the bottom of their emails so you can actually get in touch with them? I didn't think this type of stellar service existed anymore.. Kudos to etrailer.. Ok, I think I almost forgot to write about the actual product.. The product was made very well, hooked up with no issues, and when I had questions on adjustments, you guessed it, i called and emailed folks at etrailer and they actually helped me!!!! They could have sent me a box of cracker jacks and I would have given then an excellent review! :) Keep up the great work etrailer... I won't shop anywhere else for my trailer needs..
by: Bernard M06/24/2016
Truck ended up in the shop. Blown engine. We cancelled the order for the time being. Sales rep was very helpful both in helping to order the hitch and canceling the order as a result of the engine problem.
I will seriously consider reordering a hitch from etrailer. The rep was very helpful on
helping us purchase the right hitch. It was delivered at the approximate time as promised. Unfornately we had to return it as the truck is in the garage.
25
59
Show More Reviews
See what our Experts say about this Reese Weight Distribution Hitch
- How to Pick Out a Weight Distribution System for a 34 Foot Travel TrailerThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. It sounds like your current weight distribution...
view full answer... - Weight Distribution for a 2006 Ford F-250 and 9,900 Pound TrailerTo choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. For a trailer that maxes out at 9.900 pound gross trailer weight the tongue weight would be 990 to 1,485 pounds. If you determine the total tongue weight to be in that range then I recommend a system rated...
view full answer... - Can a Weld-On Sway Control Tab be Installed on a Reese Weight Distribution HeadThe issue that you will run into with the head of Reese weight distribution system # RP66131 is that the head is cast steel. Welding to cast can be difficult and requires someone with experience welding to cast to perform the installation. Other than that there aren't any specific guidelines for sway control tab # 3442.
view full answer... - Recommended Weight Distribution for Motor Home Towing 13,000 lb TrailerIf your motorhome does indeed have a hitch with a 10000 lb capacity, it means that the hitch is capable of towing a trailer weighing up to 10000 lbs. To confirm this, the hitch should have a sticker or plate on it listing the capacities. The tongue weight capacity should also be listed. Tongue weight is the amount of weight that can safely be suspended from the receiver (or the maximum downward force exerted). The hitch might also list a capacity for use with a weight distribution (W/D)...
view full answer... - Why Not Directly Weld On Weight Distribution Brackets to Trailer FrameThe reason to install steel plate to enclose an I-beam trailer frame to allow use of a weight distribution hitch's lift brackets is that this method makes for easier replacement of a bracket should one fail. If you directly weld the modified lift bracket to the I-beam then you will have a tougher time of removing it should it ever fail. Using the steel plate means you can bolt/clamp one on and more easily remove it if the need arises.
view full answer... - Recommendation of Weight Distribution and Sway Control System for 4x6 Inch I-Beam Trailer FrameI spoke with my contact at Reese and he said that you will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System 1,500 lbs. TW / 15,000 lbs. GTW, item # RP66131, for your trailer with 4 inch wide by 6 inch tall I-beam construction. To use the Heavy Duty Trunnion Weight Distribution System, item # RP66131, you will need to have a steel plate 5 or 6 inches wide welded, by an experienced welder, at 30 inches on center from the center of the...
view full answer... - Is There a Shank for 2-1/2 inch Hitch for Use with Reese Weight Distribution RP66131The Reese weight distribution system part # RP66131 does not come with a shank but we do offer shanks for 2-1/2 inch hitches that work with this like with the part # EQ90-02-4800.
view full answer... - Weight Distribution System Recommendation for Setup with 1,200 lbs Tongue WeightCurt spring bars cannot be used in a Pro Series WD head. There isn't a set of spring bars that would allow your # PS49583 to be used on a setup with 1,200-1,300 lbs of tongue weight. Instead you would want the part # RP66131 as a replacement WD system that would work great for the tongue weight you have.
view full answer... - 1,200 Pound Spring Bars for Pro Series Weight Distribution SystemThe 1,200 pound Pro Series round weight distribution spring bar is # 58338 but will not fit the head of the system you have. Since your tongue weight is greater than 1,200 pounds then going to a 1,200 pound bar would not work anyway. You would need a system rated for 800 to 1,500 pounds tongue weight, # RP66131, or one rated up to 1,500 pounds like # C17422.
view full answer... - Weight Distribution System For 2008 Chevy Silverado 1 Ton Towing A Trailer With 13,000 GVWI would recommend using the Reese Heavy Duty Trunnion Weight Distribution System, # RP66131, it is designed for 1,500 lbs. tongue weight and 15,000 lbs. Gross Towing Weight. You can also add the Draw-Tite Dual Cam High Performance Sway Control, # RP26002, to give you the pro-active sway control. This is the same system as the Reese High Performance Trunnion Weight Distribution System, # RP66022, you have referenced, but it has a higher tongue weight and towing weight. Because your trailer...
view full answer... - Weight Distribution System Recommendation for 2009 Keystone Sprinter 311BHSThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. So your tongue is realistically going...
view full answer... - Weight Distribution Recommendation for a Trailer with a 600 Tongue Weight RangeYour absolute best solution would be to use your 1,400 lb rated Equalizer system for when you have the motorcycle loaded and then use a lighter rated head and spring bar when you aren't transporting the motorcycle. For that you would want to use the # FA92-00-0800. This will work with your current shank and spring bar hangers. Loaded tongue weight is everything for weight distribution systems. With as wide of a range you have there's not a way to effectively use your current system with...
view full answer... - What is the Function of Reese Replacement Trunnion # 58098The Reese Replacement Trunnion, part # 58098, is used to hold a trunnion design spring bar into the head of the Reese Weight Distribution System, part # RP66130, or part # RP66131. The spring bar will insert into the trunnion and be held in place with the roll pin. Then, the trunnion, with the spring bar inserted, is attached to the head # RP58167 of the weight distribution system. I am including a picture of the spring bar inserted into the trunnion and a picture of the trunnion and...
view full answer... - Reese Strait-Line W/D System For 13K Trailer Towed by Chevy 1 Ton Pickup w/ Class V HitchIf the 1300 lb figure you mentioned represents the fully loaded and ready to tow tongue weight of your trailer, and includes the weight of anything stowed in your truck bed behind the rear axle, the Reese Strait Line Weight Distribution System with Sway Control, part # RP66075 would be an excellent choice. The system is effective on trailers with tongue weights ranging from 1000-1700 lbs. The system uses the Reese Dual Cam sway control, which one of the most effective sway controls available....
view full answer... - What Reese Weight Distribution Systems Use the Heavy Duty Snap Up BracketsThe higher capacity Reese WD systems we carry do have the heavy duty brackets part # 58392. For example the Reese WD System part # RP66131 has the heavy duty brackets. To answer your other question, yes the # 58392 does include the set screw and safety pin. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow...
view full answer... - Weight Distribution System Recommendation for 10,000 lb TrailerWith a weight distribution system installed you can back up with the system connected if you are mainly going back in a straight line. If you need to jackknife the trailer pretty tight you will need to disconnect the spring bars otherwise they will either fall out (or fly out), or they can break. If you don't need sway control a weight distribution system with it will still benefit you. The Reese system part # RP66131 would be an excelleng option for your trailer has it has a tongue...
view full answer... - Can a Weight Distribution System be Used on an I Beam TrailerYou will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System # RP66131 for your I-beam trailer. This system would be rated perfectly for your 10k trailer if it was going to be loaded near it's capacity. This system has a tongue weight range of 800 lbs - 1,500 lbs which would be most likely what you would have. For a shank you would then want the part # RP54977. To use the Heavy Duty Trunnion Weight Distribution System, # RP66131, or...
view full answer... - Weight Distribution Recommendation for I-Beam Trailer that Weighs 14,000 lbTo install a weight distribution system on an I-beam trailer requires you to take the trailer to a welder to have them box the I-beam frame where you'll need to install the weight distribution brackets. This gives the brackets something they can attach to. For brackets then we have the part # RP58305. Then for a weight distribution rated for a trailer with 1,400 lbs of tongue weight we have the Reese system part # RP66131. For a hitch ball then you'd want the # 19286 and for a shank part...
view full answer... - Weight Distribution System for Pace 6 by 12 Foot Utility Trailer Being Towed by 2002 ExpeditionWeight Distribution Systems are classified by the tongue weight or downward force that the trailer applies to the trailer ball. If the dry, unloaded weight of the trailer and the weight of the cargo as it is typically loaded is known, we can calculate the tongue weight. The tongue weight is typically 10-15 percent of the fully loaded ready to tow weight of the trailer. Anything stored behind the rear axle of the tow vehicle should also be considered tongue weight. Given the weights you...
view full answer... - 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131Yes, 2-5/16 inch ball # 63840 will fit Reese weight distribution system # RP66131. The shank length and diameter matches what the system requires.
view full answer... - Weight Distribution Setup for Trailer With Pole Tongue and Heavier Tongue WeightWe can only recommend Reese weight distribution systems for use with their pole tongue adapters, and based on the weight range of the # C17057 and the picture you sent in you'd want the higher rated pole tongue adapter part # RP58393 which is rated for up 1,400 lbs tongue weight. Then for a weight distribution system you'd want the # RP66131 which has a tongue weight range of 800 to 1,500 lbs. For a hitch ball you'd want the part # C40030 and for a shank part # RP63971 and you'd be set. Curt...
view full answer...
- Weight Distribution for a Ram 2500 and 9,795 Pound TrailerTo choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Given that the estimated tongue weight prior to loading cargo in the trailer is 1,000 pounds it is likely to increase and going with a system rated for 800 to 1,500 pounds tongue weight, such as # RP66131 would...
view full answer... - How to Pick out a Weight Distribution System with Sway Control for a 2012 Ram 3500The first thing you need to know in order to pick out the correct weight distribution system is the loaded tongue weight of the setup when it is ready to tow. This is the most important factor to consider and I attached an FAQ article on how to determine this figure for you to check out also. To determine if your vehicle is capable of using weight distribution you will need to consult the owners manual. There should be a section on towing that will have towing capacities and any restrictions...
view full answer... - Trunnion Bar Weight Distribution Hitch With 1400 lb Tongue Weight CapacityIf you're wanting a trunnion bar system without sway control that has a 1400lb+ tongue weight capacity, Reese offers one. I'd recommend the # RP66131 Trunnion Bar system, which is effective on trailers with tongue weights ranging from 800-1500 lbs. You'll also need a 2-5/16 trailer ball, part # 19286. The kit doesn't include a shank, so you'll need to measure the height difference between the inside top edge of your hitch receiver tube and the underside of your trailer coupler when it's...
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Updated by:
Manda E
Installed by:
Cole B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Arizona S.
9/26/2019
Wonderful. Make sure to keep your trunnions greased.