Weight Distribution Setup for Trailer With Pole Tongue and Heavier Tongue Weight

Question

Question:

Is this system compatible with Item # RP3280 the Reese Pole Tongue adapter?

asked by: Brett M

0

Expert Reply:

We can only recommend Reese weight distribution systems for use with their pole tongue adapters, and based on the weight range of the # C17057 and the picture you sent in you'd want the higher rated pole tongue adapter part # RP58393 which is rated for up 1,400 lbs tongue weight.

Then for a weight distribution system you'd want the # RP66131 which has a tongue weight range of 800 to 1,500 lbs. For a hitch ball you'd want the part # C40030 and for a shank part # RP63971 and you'd be set.

Curt does not have a pole tongue adapter for use with their system either.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, you can get the individual parts of Reese weight distribution system #RP66542 needed to use the system on a second trailer. First, you will need the frame brackets that mount on the trailer frame. For both brackets I recommend #RP6637. You can…

view full answer...

Answer 2

Adding a simple friction sway control bar is a great idea for when you are traveling down the highway; it will make towing your trailer in crosswinds less of a white-knuckle situation. Since you mentioned a 27 foot trailer it is recommended that you…

view full answer...

Answer 3

I can tell by the picture you submitted that you have current Reese trunnion style spring bars by the square shape and the curved end I see on the bar. Since you have a tongue weight of 1,200 lbs then the bars you'd need are going to be the 1,000…

view full answer...

Answer 4

For the dual friction you are looking for, I recommend adding the Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch #83660 to your hitch ball. This adjustable friction sway bar can be added using the Reese Sway-Control…

view full answer...

Answer 5

The exterior length of your Sonic Venture SN231VRK is 26-1/2 feet which is just over the length where a second friction sway control system is recommended of 26 feet. So your best option would be to install a second #83660. Typically, to add a second…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 8

The design of the Progressive Dynamics 4000 Series Mini RV Converter #PD4045KA hasn't changed much, but the key is to look for the converter section. The switch is located on the converter's circuit board and will have in white "LA"…

view full answer...

Weight Distribution Setup for Trailer With Pole Tongue and Heavier Tongue Weight

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching