bing tracking image
  1. Weight Distribution Hitch
  2. Reese
  3. 1000 lbs
  4. 1100 lbs
  5. 700 lbs
  6. 800 lbs
  7. 900 lbs
Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW

Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW

Item # RP66542
Retail:$932.13
Our Price: $619.59
You Save: $312.54
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 86 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full weight distribution hitch installation instructions. Great price Zinger Travel Trailer weight distribution hitch and expert service. CrossRoads Zinger Travel Trailer, 2015 weight distribution hitch by Reese are available from etrailer.com. For expert service call 1-800-940-8924 to order your Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW part number RP66542, or order online at etrailer.com.
  • All Info
  • Reviews (70)
  • Q & A (0)
  • Photos

Reese Weight Distribution Hitch - RP66542

  • 1000 lbs
  • 1100 lbs
  • 700 lbs
  • 800 lbs
  • 900 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • Reese
  • Electric Brake Compatible
  • No Sway

High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank included. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Trunnion spring bars are hot rolled and tapered for superior strength and flexibility
    • Bars flex appropriately over uneven terrain for a controlled, even ride
    • Curved ends are designed for use with dual-cam sway control (RP26002 - sold separately)
  • Adjustable spring-bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is easily achieved with serrated-washer design - no more piling on washer after washer
  • Forged, raised ball platform on head eliminates need for raised hitch ball
  • Solid steel shank has corrosion-resistant powder coat
  • System includes head assembly, adjustable shank, lift brackets, trunnion spring bars, lift chains, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 600 lbs - 1,200 lbs
  • Gross towing weight: 12,000 lbs
  • Fits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems
  • Lift-bracket positioning: mount about 30" back from hitch ball
    • Requires approximately 5-1/2" of space along trailer frame
      • Optional mounts (sold separately) that take up less space on a trailer frame are available
    • Will not fit trailer frames wider than 2-1/2"
  • Shank length: 14" from center of hitch pin hole to center of ball hole
  • Total height adjustment along shank: 5-1/4"
    • Maximum rise: 6-1/2" from top of hitch receiver opening
    • Maximum drop: 1-1/4" from top of hitch receiver opening
  • Limited lifetime warranty


Included w/ RP66542Required - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control
  • Dual-Cam Sway Control

Weight Distributing Hitch

Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.



Selecting a Weight-Distribution System

The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.


Serrated Washer System

Unique Features of Reese Trunnion-Bar Weight Distribution

The easy-to-use, serrated washers on the Reese system make adjusting the tilt of the weight-distribution head a snap. This is a huge improvement over the standard pin-and-washer method, which involves piling washers - one on top of another - onto a difficult-to-access pin. The serrated-washer system lets you easily loosen, adjust and tighten a single washer and nut on either side of the head for simple, secure positioning.



The trunnion spring bars of this system slide into the weight-distribution head for quick, easy installation. With a tapered design and hot rolled steel construction, these bars offer superior flex, ensuring a smooth, controlled ride for both your tow vehicle and your trailer. In addition, these specially designed bars have rounded, hooked ends, making them the only kind of spring bars that can function with Reese's active-style, dual-cam sway control (sold separately).



66542 Reese Trunnion Bar Weight Distribution Hitch with Hitch Bar

Installation Details RP66542 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW - RP66542

Average Customer Rating:  4.7 out of 5 stars   (70 Customer Reviews)

High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank included. Hitch ball sold separately.

by:

This worked great. I gained about 2 1/2 inches on the rear lift , both the front and rear wheel well are at 36 1/2 off the ground . what a difference . Trailer is a little higher then level, not much, but with a quick adjustment that can be rectified. Delivery was on time and working with Briana was a pleasure. I emailed all the specs and the correct unit was recommended to me which is the one I purchased.



by:

I've been looking for this Reese hitch and was having trouble finding at with all the parts, I got all the hardware to make this hitch work and at a lower price. It was delivered to my house 3 days later and Lauren A answered all my questions and took my order, Thank you



by:

Excellent customer service, Steve was knowledgeable and courteous. Fast delivery. Great quality. Adjustable chains work well for varying loads on my 10K car hauler.

Larry

9/7/2021

Hitch is working great on my 10,000 lb. car hauler. Have hauled loads ranging from a tractor, loader, and tiller to an SUV with no issues.



by:

The folks at etrailer were very helpful on selecting this Reese hitch. Great people there. Thank you for all your help.



by:

Excellent delivery speed, unfortunately we had to wait until last week to have the trailer delivered. Used the hitch 3 times and are very pleased with the ease of installation. Enjoyed the heavy duty bar to over center the distribution bar. Used the same trick I used on previous hitches - place a bicycle handlebar grip on one end of the bar - much more comfortable. First time with trunnion bars - I'll never go back to the bent bar type with the snap pins and flexible clips - I've had to replace them several times - a real pain to drill out the rivets and find new ones. Very satisfied with hitch. Pulling a 24' Outdoor RV - "Timber Ridge" - 8000 GVW with 900 lb tongue weight with a Ford F250 Diesel. Pulls like a dream!



by:

I am very happy with the Reese Weight Distribution System that
I purchased from E-Trailer.

Even more... I got exceptional customer serviced from the staff and Technical Experts that I contracted.

I have included some installation tips in the attachments & a photo of what it is all about!



by:

After our third trip with this hitch it has performed great. This is almost exactly the same hitch that we have had for over 20 years so hopefully we will get 20 plus out of this one. Our only dissatisfaction is that the hold pins are very difficult to insert. As always the service of etrailer has been terrific.

Kimble W.

10/22/2021

After a year of use its still performing great.



by:

Super hitch easy to set up and install. Easy and very informative instructions. Hooked up took a test drive worked so well I thought this can’t be true. Made an adjustment on the chain link and OMG what a big difference, not for the good though. Went back to the instructed set up perfect. Love it.



by:

One of the nuts supplied to attach chain to trunion bar was not self locking. Otherwise this was bought because I have next larger version for a different trailer and have been pleased with it. The service was great in that the ball I ordered was out of stock and they notified me immediately and suggested an alternative ball that met my needs.

Mark

8/19/2022

Works well. I like the easy adjustability of the chains for different loads as the trailer is used for many different items.



by:

We ordered the the weight distribution kit and hitch for a new camper on May 20th. We were going camping on the 26th of may and still had not received confirmation of shipping on the 23rd. My wife called and spoke to Sandy who advised that the online order dept was very backlogged but that she would check into getting it shipped right out for us. We received the hitch on the 25th and were able to get it hooked up and ready to go for the memorial weekend camping trip. Excellent product but more importantly to us was the above and beyond customer service we received.

Mark O.

6/21/2017

Great product!!!Very well built.



by:

Another great Reese Product.
Installed
on a Tundra towing a Flagstaff Tent Trailer with a toy deck. I was having problems with the load sinking my truck and trailer. With the distribution system installed it is now towing very nicely. I had to increase the length of the chain by 1 link due to the way that the hitch on the trailer was built. I would buy and use another one with NO hesitation.



by:

The product, for how much steel it consists of came to my front door step completely unscathed. The packaging was flawless. After the cursory inspection, I began laying out the parts readying myself for assembly. The instructions were thoughtfully crafted and easy to follow.
Once mounted and setup, I took the trailer for a test pull. My trailer is a 26' enclosed car hauler. I put my wife's car in the trailer (her car is relatively small and probably only ways 2500 lbs give or take) and pulled 5 miles of curvy roads and about 10 miles of freeway. The system is confidence inspiring! I would whole-heartily recommend this product. It arrived quickly mounted easily and inspires confidence. What more could you ask for?



by:

The hitch is plenty heavy duty and worth the money. Makes a big difference when driving with a heavier trailer when compared to a conventional hitch.

Delivery of the hitch was fast too!!



by:

Great product instructions easy to follow, easy to install. It was a backordered product but came in a week earlier that expected. Packaged well though box was ripped in during shipping, watch out for the shim (optional shim Kit) that comes with the kit, almost threw it out was stuck loose in the bottom of the box.



by:

Appears to be good quality and easy to install - just need some time and don't rush the process. Have only used it once on a short trip and seems to be good. I noticed that the ride seems stiffer than with the curve bar type that I had prior - the bars are bigger and at a different point and do not appear to flex much. Shipping was faster than I expected for a heavier package. I will know how it performs after taking a longer trip.



by:

Very heavy-duty. Superior quality. etrailer's customer service is outstanding! They agreed to price match, shipped immediately, great communication, excellent follow-up. Love doing business with this company.



by:

purchased this to replace my old load leveler. when I bought a new bunkhouse w/ a tipout the old 8000# wouldn't handle it. it was easy to put together and the hook is a breeze. the price was excellent and delivery was very quick.



by:

This has made hauling our trailer a lot easier.
The trailer is a 24 ft enclosed, used mainly for racing.



by:

Great product and quick delivery. I had the same exact hitch for my travel trailer and it served us well.



by:

We're first time horse trailer owners and took the recommendation of EquiSpirit as to where to purchase the necessary equipment. We have been very satisfied with your service, your speedy delivery and no delivery charge on the heavy items.



by:

Excellent quality, forged not cast. Quick shipping, knowledgeable sales staff. I would highly recommend e trailer.



by:

I ordered a Reese Weight Distribution Hitch from etrailer and it was shipped the same day. It arrived in great shape, I'm very satisfied with my purchase. The online price at etrailer was substantially less than what it would of cost locally.



by:

Product appears to be of top quality and is very well built. I am hoping that it will shift more of the weight to the front of the truck and level it out. I will find out this spring when the towing season starts.



by:


Very fast service and its just
what I was looking for, Thank You

Merle

1/24/2019

Holds a load very well and keeps my truck on track going down the road!



by:

Very fast shipping and excellent product. I will definitely do business with etrailer.com again. Thanks.


25
70
Show More Reviews

See what our Experts say about this Reese Weight Distribution Hitch

  • Weight Distribution Hitch Recommendation for Trailer with 755 lb Tongue Weight
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For a loaded tongue weight of 755...
    view full answer...
  • Hitch Extender Recommendation Towing 7,500 lb Trailer
    If you use the Reese Elite hitch extender part # RP45292 in your 2-1/2 inch hitch at the 24 inch length with a weight distribution system you'd have an 8,000 lb capacity. That would be the only way to get an extension with the needed capacity. For a properly rated weight distribution system then you'd need the Reese Steadi-Flex kit part # RP66560 which has integrated sway control and you'd be set.
    view full answer...
  • Weight Distribution and Sway Control Recommendation for Trailer with 350-400 lb Tongue Weight
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For a loaded tongue weight of 350...
    view full answer...
  • Weight Distribution Recommendation for 36 ft Keystone Cougar with 800 lb Dry Tongue Weight
    If your unloaded tongue weight is 800 lbs I wouldn't recommend either of the Blue Ox systems you mentioned as you'll most likely have a pretty harsh ride quality. In general the Blue Ox systems aren't bad but for the price but you are much better off with a Reese system like part # RP66542 which has a tongue weight range that's perfect for your setup at 600-1,200 lbs and in general our customers prefer over the Blue Ox setups. The Reese bars seem to not be quite as harsh as the Blue Ox...
    view full answer...
  • Recommended Weight Distribution System for Towing 30 Foot 4200 lb Aerolite TT w/ 2000 Dodge Durango
    To choose a weight distribution system, you'll need to first determine the fully loaded and ready to tow tongue weight of your trailer. To that figure, add the weight of any gear stowed in the cargo area of your Durango behind its rear axle. I've linked to an FAQ article that explains how to do this. These combined figures make up the Total Tongue Weight (TTW) of your set-up. The TTW of your trailer should fall as close as possible to the middle of the effective range of the weight distribution...
    view full answer...
  • Is a GMC Sierra 2500 HD a 3/4 or 1 Ton Truck
    Great question! Ford, GM and Ram use a similar nomenclature for their full-size trucks. • For GM and Ram, 1500 is a 1/2 ton, 2500 is a 3/4 ton and 3500 is a 1 ton. • For Ford trucks, the F-150 is a 1/2 ton, the F-250 is a 3/4 ton and the F-350 is a 1 ton truck. You have a 3/4 ton truck.
    view full answer...
  • Trailer Hitch, Wiring and Weight Distribution for 2015 Dodge Durango
    For a 2015 Dodge Durango we do have hitch fits that would work well. The Draw Tite hitch part # 75713 has the highest towing capacity available at 6,000 lbs trailer weight and 900 lbs tongue weight so it would be the hitch I would recommend. This will fit a Durango that does not have a factory hitch. I attached an install video for you to check out as well. For trailer wiring the part # 118617 is recommended. I attached an install video for this as well. Since you plan to max out your...
    view full answer...
  • Does Reese Weight Distribution System RP66542 have to be Disconnected when Backing Up
    Weight distribution systems that use bar-style friction sway control such as # RP66542 should be disconnected before backing up. If you are backing up perfectly straight then that would be ok but that is rarely the case with trailers! Disengaging the sway bar is not difficult but who wants to get in and out of the truck to do that? I recommend a system that does allow you to back up without having to disengage the sway control. For a system that is rated the same as that Pro Series system...
    view full answer...
  • Weight Distribution Hitch for 2018 Jeep Grand Cherokee Trailhawk Towing 6000-lb Boat Trailer
    Thank you for the details about your loaded boat trailer's tongue weight. To match this 710-lb loaded TW and to allow you to back up the trailer I recommend the Equal-I-zer 4-Point system # EQ37100ET which works for a TW range from 600 to 1000-lbs. This setup comes complete with a shank and 2-5/16-inch hitch ball. I recommend a thin-wall socket like # ALL643216 for an easier time when installing the hitch ball. The 4-Point will both level your load and control sway. These systems are...
    view full answer...
  • Suspension Enhancement Solution for a Truck that will See A Wide Variety of Trailer Weights
    The best solution I can recommend for you would be a suspension enhancement setup for your 2007 Toyota Tundra. If you are constantly changing the weight of the trailer you tow you would not want to mess with adjusting a weight distribution system every time you tow a trailer. Setting up a WD system isn't hard but it's not something you would want to have to do every time you tow. Instead an air suspension enhancement system like the Firestone System part # F2445 would be your best option....
    view full answer...
  • Can Weight Distribution be Used on a Trailer with a C-Channel Frame
    As long as the opening of the C-Channel is on the inboard sides of the frame then you can use a chain hanging weight distribution system whether it is round bar or trunnion bar. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. If 550 pounds is the total...
    view full answer...
  • Can Replacement Curt Head # C17075 be Used with Valley Round WD Bars
    I do have a solution for you to still use a Weight Distribution (WD) system, but unfortunately aside from WD shanks different parts of WD systems are not interchangeable. Even if they were to fit together they have not been tested together and so any weight capacities would be unknown. If you would like to still use a WD system you will need a whole new kit. Since it looks like you are using a friction sway control like part # 83660, a similar WD system that has a Tongue Weight (TW) range...
    view full answer...
  • Weight Distribution System for 7,000 lb Trailer with Pole Tongue
    If you have a pole tongue trailer you will need to use a pole tongue adapter like the # RP58393 to use a weight distribution system. The Husky part # HT32218 is not compatible with this adapter and Husky does not offer an adapter so you would need to go with a Reese WD system. For that the part # RP66542 would be great. This system has a tongue weight range of 600 lbs - 1,200 lbs so as long as your 7k trailer has a tongue weight of around 10-15 percent of the total trailer weight this...
    view full answer...
  • How Can You Tell if a 2015 Silverado Z71 has a Factory Brake Controller?
    This will indeed be a factory brake controller. The slide lever will be the manual override and the plus and minus buttons will set the level of braking for the trailer brakes. I included a picture of this from the owners manual as well. From what I could find out, this should work with both electric brakes and electric over hydraulic brakes as well. With all that being said, if the controller has never been used, or even if it has, it is a good idea to check to make sure it is functioning...
    view full answer...
    Image 1 for
  • How to Determine the Towing Capacity of a 2019 Jeep Cherokee Limited
    From what I could find out, the 2019 Jeep Cherokee is limited to 2,000 pounds towing. That being said, to confirm your max capacity, you can look at the inside door jamb of the driver door. There will be a sticker/label with all the capacities the vehicle can handle.
    view full answer...
  • Weight Distribution Recommendation for a 2006 Keystone Travel Trailer
    There is a solution for a situation like your where the trailer frame is not long enough or blocked where the spring bars of a weight distribution system need to hang. What you can do is replace the frame-top type hangers with ones that bolt through the side, # RP58305. These fit frames that are no wider than 2-1/4 inches. With these installed, you would use the trailer jack to lift truck and trailer to hand the spring bars, rather than the tool used with the lift brackets. Based on the...
    view full answer...
  • What Weight Distribution Sway Control for 2007 Jeep Wrangler Unlimited Towing Fleetwood Camper
    Thank you for submitting the photo of your lifted 2007 Wrangler Unlimited and your 2008 Fleetwood Evolution 3 pop-up camper. Generally speaking, weight distribution systems with sway control are not desirable when the vehicle and trailer will be taken off-road. When driven on uneven surfaces, such as a bumpy or pitted dirt road, the stiffness of the friction sway control system may lead to erratic handling in the tow vehicle. Because it prevents free movement of the trailer in relation...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution for 2014 Ford Expedition Towing 24-Foot Enclosed Car Hauler Trailer
    The key to selecting the right weight distribution (WD) and sway control system is to know your trailer's fully-loaded tongue weight (TW). We offer a dedicated scale # e99044 to make this easier but other methods are shown in the linked article. To this actual measured tongue weight, you'll add the weight of anything in the tow vehicle that sits behind the rear axle, say a full toolbox, loaded cooler or generator. With this total effective TW known you can select a system, one that will...
    view full answer...
  • Weight Distribution Recommendation for 2,700 lb Trailer Towed by Ford Flex
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Since the tongue weight of a trailer...
    view full answer...
  • Troubleshooting Vehicle Suspension that Still Sags After Weight Distribution is Installed
    If a vehicle is still sagging in the rear after a weight distribution system has been installed that means that the system either wasn't set up properly with the correct amount of spring bar tension or that the system you are using isn't rated high enough for the tongue weight of the loaded trailer. You should note that any weight behind the rear axle of the vehicle will have to be considered as tongue weight. The best way to pick out a weight distribution system is to base it off of the...
    view full answer...
  • Parts Needed to Use Reese Trunnion Weight Distribution on Another Trailer
    Yes, you can get the individual parts of Reese weight distribution system # RP66542 needed to use the system on a second trailer. First, you will need the frame brackets that mount on the trailer frame. For both brackets I recommend # RP6637. You can also add new chains with # 55630 but you will need to order 2 of them. This would be if you have to also use different bars. For the bars you can use the same ones that you have if the tongue weight of the new trailer is 600 to 1,200 pounds....
    view full answer...
  • Extended Weight Distribution to Tow a Trailer with ATV In Bed and Tailgate Down on a 2013 Ford F-150
    Weight distribution shank # RP63971 measures 15 inches from the center of the hitch pin hole to the center of the ball hole when using a round bar weight distribution system. Measure from the center of the pin hole back to how far the ATV will stick out to determine if this is enough extension. When choosing a system you have to go by the tongue weight of the trailer when loaded and ready to tow and add to that the weight of anything loaded behind the rear axle of the truck bed. With the...
    view full answer...
  • How Does Spring Bar Tension of Equal-I-Zer Weight Distribution System Adjust
    The spring bar tension of the Equal-I-Zer systems like the part # EQ37100ET you referenced is adjustable but since the adjustment is made using the angle of the head of the system it wouldn't be ideal for quick adjustments. I attached a picture that shows how the adjustments of this system are made. A setup that uses chains instead and allows you to use different link lengths may be more ideal for you like the Reese # RP66542 which is similarly rated at 600-1,200 lb tongue weight.
    view full answer...
    Image 1 for
  • How to Pick Out a Weight Distribution System for a 2012 Dodge Ram 1500 Towing a 7,000 lb Camper
    The best way to pick out a weight distribution system is to based on the loaded tongue weight of your setup when it is fully loaded and ready to go. I would recommend loading your trailer up camper like you are going on a trip and then determining the tongue weight. Check out the FAQ article I attached that details how to do this. Most likely the Reese Weight Distribution System # RP66542 would work since it has a tongue weight range that should work well with your setup. I attached an...
    view full answer...


< Previous
123. . .8



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video by:
Zack K
Employee Lindsey S
Written by:
Lindsey S
Employee Kathleen M
Updated by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.