Minimize trailer sway and ensure a stable, level ride. Pre-set pitch on the hitch head keeps your trailer centered and simplifies the installation. 2-5/16" Ball and shank with max 2" drop, 8" rise included. Made in the USA.
Features:
Specs:
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
| n/a | n/a |
Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced. If you still have a hard time even after balancing your tongue weight, a weight distribution hitch should help.
When you turn a corner in a car and let go of the steering wheel, the wheel automatically corrects itself and returns to center. The same technology used to keep your vehicle centered on the road is what the TrackPro uses to prevent trailer sway before it even starts, no matter if it's caused by high winds or sharp turns. Pointing toward the rear of your trailer, there's a positive caster angle built into the hitch. It works in tandem with the tapered spring bars to create a self-centering force that keeps your trailer consistently centered behind your tow vehicle.
This positive caster creates another benefit - an easier installation. Since the required pitch is alredy pre-set, there's no need to fine-tune it using hard-to-access washers or a difficult-to-use thumbscrew. The only adjustment that may be needed is the placement of the head on the shank. Move the head up or down along the weight distribution shank to achieve the proper height.
If you need an option built with American-made steel that will hold your trailer in line while providing sway control, the Blue Ox TrackPro might be just what you're after. In addition to the pre-set pitch described earlier, the TrackPro creates a rigid system that holds your trailer in line behind your vehicle, helping keep your trailer from getting off track. And it uses friction to force your trailer back in line if a strong crosswind or passing truck is a bit too much for the rigid hold to handle on its own.
Because the steel-on-steel friction of the bars and L-brackets is noisy, don't be alarmed if you hear some banging, creaking, and grinding. It's just the system working to correct sway.
Fun Fact: Steel-on-steel friction is what locomotives use to keep multi-ton railcars from swaying.
Your tongue weight is the first thing you need to know when figuring out which weight distribution system you need. Most people think that if they get the highest-rated system possible, it'll be smooth sailing. But actually, this will create a rigid ride and a bouncing trailer. On the other hand, if the system isn't strong enough, it won't be able to distribute the weight properly, making it virtually useless.
Once you know your trailer's tongue weight, add it to the weight of the cargo behind the rear axle of your tow vehicle. Then just choose a weight distribution system rated for that combined tongue weight.
California residents: click here
Average Customer Rating: 4.5 out of 5 stars (187 Customer Reviews)
Minimize trailer sway and ensure a stable, level ride. Pre-set pitch on the hitch head keeps your trailer centered and simplifies the installation. 2-5/16" Ball and shank with max 2" drop, 8" rise included. Made in the USA.
Do you have a question about this Weight Distribution Hitch?
Condition: Surface Scratches
Notes: Item has cosmetic scratches.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.