See what our Experts say about this Blue Ox Accessories and Parts

• Is It Normal For Edge Of L Bracket On Blue Ox 2-Point BLU44XR To Wear A Lot?
  That is not normal wear for the L-Brackets on your Blue 2-Point # BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and verify your system is rated correctly for your trailer. The tilting of the head is used to add tension to the spring bars so it's possible your spring bars are underrated for the tongue weight your using it for. With all of that said for...
  view full answer...
  
• What Replacement L-Pins Will Work with My Fastway E2 Weight Distribution Hitch with Flat End Springs
  Hello Roman, The E2 is a great Weight Distribution Hitch! For the Fastway E2 with the flat bars at the end (please refer to image that I attached) you are going to want the Replacement Hardware Kit for Fastway Sway Control Brackets # FA92-02-9200. This repair kit will work on the 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system. We do not have L-pins separate so you are going to get a few extra parts, but who knows those extra parts might come in handy...
  view full answer...
• Can The L-Brackets On Blue Ox TrackPro Be Installed On Top 2 Mounting Holes?
  Per the instructions(linked below) for the Blue Ox TrackPro Weight Distribution # BLU27FR you should have at least one open hole on your L-Brackets # BLU42QR. It sounds like your hitch head may be pitched to far down or you have an underslung coupler. If you have an underslung coupler you will need the Long L-Brackets # BLU52QR. Feel free to send any images of your installation and I can verify what you may need.
  view full answer...
• Recommended Weight Distribution With Sway Control Hitch For a RV Transporter
  I do have a recommendation so that you will not have to have separate hitches as the Blue Ox SwayPro Weight Distribution # BXW1503 hitch head is specific for underslung only couplers. I recommend getting the Blue Ox TrackPro Weight Distribution # BLU35FR for towing with your 2016 Ram 5500. While this hitch is also specific to underslung couplers you can change out the L-Bracket Plates # BLU42QR to use a standard coupler. This system is rated for trailers with a tongue weight of 1,000-1,300lbs...
  view full answer...
• Will Blue Ox Sway Brackets Be Compatible With a Fastway e2 Weight Distribution Hitch?
  The Fastway e2 L-Brackets # FA93-02-5150 are different from the Blue Ox # BLU42QR brackets you found. You will want to be sure to use the Fastway brackets or the Assembly # EQ95-01-5600 from Equal-i-zer can also be used as they share these parts between their weight distribution hitches.
  view full answer...
• Replacement Brackets and Spring Bars for Blue Ox TrackPro Weight Distribution w/ Sway Control
  As long as the spring bars on your # BLU67FR are in good shape there shouldn't be a need to replace them. If they are significantly worn, bent, or damaged then I would replace them along with the L-Bracket Plates # BLU42QR. The correct spring bars for your system are the # BLU25FR. For the L-Brackets with the mounts you need the # BLU72QR.
  view full answer...
• Can L-Brackets Be Used Instead Of Chain Hangers For Chain Spring Bars?
  For chain type spring bar weight distribution hitches you must use a Chain Hanger # C17003. The L-Brackets # BLU42QR can only be used for systems designed to ride on this type of bracket. I recommend matching your manufactures for the spring bars and the hangers to ensure everything is compatible.
  view full answer...