1. Vehicle Suspension
  2. Air Lift
  3. Air Springs
  4. Rear Axle Suspension Enhancement
  5. Light Duty
Air Lift 1000 Air Helper Springs for Coil Springs - Rear

Air Lift 1000 Air Helper Springs for Coil Springs - Rear

Item # AL60732
lowest price pledge
Retail:$146.14
Our Price: $90.39
You Save: 38%
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
Air Lift Vehicle Suspension - AL60732
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride. Lowest Prices for the best vehicle suspension from Air Lift. Air Lift 1000 Air Helper Springs for Coil Springs - Rear part number AL60732 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (362)
  • Q & A (33)
  • Photos
  • Why etrailer?

Air Lift Vehicle Suspension - AL60732

  • Air Lift
  • Air Springs
  • Rear Axle Suspension Enhancement
  • Light Duty

1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.


Features:

  • Provides 1,000 lbs of load-leveling support to improve safety and ride quality
    • Supports your existing rear coil spring suspension when you're hauling or towing
  • Keeps your vehicle level when you are hauling a heavy load
    • Improves steering and braking performance and maintains headlight aim
    • Reduces tire wear and OEM suspension strain
  • Diminishes sway and absorbs road shock to improve stability and ride quality
  • Lets you manually adjust air pressure for even load distribution and support
    • Inflate each spring independently to level off-center loads (with installation of dual air lines)
  • Constructed of durable, molded polyurethane
  • Installs inside your vehicle's rear coil spring suspension
  • Includes 2 air springs, 2 heat shields, tubing, Schrader valves, and hardware
  • Add a compressor system (sold separately) to monitor and adjust air pressure
  • Made in the USA


Specs:

  • Load-leveling capacity: up to 1,000 lbs
    • AirLift 1000 springs will not increase your vehicle's weight-carrying capacity. Do not exceed the manufacturer's recommended weight limit.
  • Adjustable air pressure: 5 psi - 35 psi
  • Lifetime warranty
  • 60-Day satisfaction guarantee


Heavy loads can cause the back of your vehicle to sag and add unnecessary stress to your suspension. This stress not only affects your brakes in a bad way, but your tires, headlight aim and handling suffer as well. To improve your vehicle's ability to endure heavy loads, you need to add support to your existing coil springs.


Air Lift's AirLift 1000 adjustable air springs have 1,000 pounds of load-leveling capacity and are made specifically to fit inside your rear coil spring suspension for additional load assistance. You can inflate and deflate these tough, molded polyurethane helper springs as needed, ensuring the perfect amount of support for every load, every time. Easily level your vehicle front to rear, and if you run dual air lines to the air springs at installation, then you can inflate the springs independently of one another for side-to-side leveling. AirLift 1000 is a breeze to install with standard tools and comes with an easy-to-follow instruction manual.


AirLift 1000 comes with manual inflation valves that are typically mounted on the bumper but can be installed anywhere on your vehicle for easy access. For even more convenience and control, you can add a compressor and gauge system (sold separately), which will let you monitor and automatically inflate your air springs.


Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.


Air Lift is positive that you will benefit from their air spring suspension system - so much so that they offer a 60-day satisfaction guarantee. Install and use AirLift 1000 springs for 60 days, and if you are not satisfied at the end of this time, you can remove them from your vehicle and return them for a full product refund.



60732 Air Lift 1000 Air Bag Suspension Support System for Coil Springs - Back

Installation Details AL60732 Installation instructionsAlternate Instructions AL60732 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Air Lift 1000 Air Helper Springs for Coil Springs - Rear - AL60732

Average Customer Rating:  4.7 out of 5 stars   (362 Customer Reviews)

1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.

- AL60732
by:
2014 Toyota Sienna

Purchased to reinforce suspension for towing a camper. Install was easy. Product has worked as advertised. Great purchase. 699660



- AL60732
by:
2006 Toyota Sienna

This was the easiest install I've ever done! One hour on a 06 Sienna. The video made it simple. The van drives great with only passengers so far. Roll has been reduced tons. This is the 4th time I've ordered from etrailer. The directions on all the products has been great. Videos are spot on. 227466



- AL60732
by:
2013 Toyota Sienna

Just what I needed on my Toyota Van. This combined with my Curt Weight Distribution Hitch makes towing my Wolf Pup travel trailer all good! Nice and level now. Easy to install too. I kind of like leaving pressure in them even when not towing to reduce body roll on the van. I ran two separate air hoses on mine so pressure can’t move from one side to the other. 576417



- AL60732
by:
2011 Toyota Sienna

There are 6 in our family and we like to play on our vacations. Which means lots of people and stuff in and on our mini-van, and a bike rack with 5 bikes on the back (and one bike inside). Our old Toyota Sienna clearly sagged under the burden, so when we got a 2011 Sienna which has a lower bumper to begin with, I was nervous about how it would handle everything, and particularly with the bike rack out back if it might even scrape the ground at times (bottom of hills, speed bumps...). I purchased these to help the suspension. They installed relatively easily, and we took our first trip of about 450 miles to Cape Cod and all went well. We had minimal if any noticeable drop in the back of the van, even fully loaded with all six of us, a full rooftop carrier, 5 bikes on the back, and extra seating inside (van sits 8) folded down and that available space also packed. We have only had these for a few weeks and I am a bit of a perfectionist, so these may very well deserve an excellent mark. The only thing that is keeping me from that is that I have only had them for a little while, so if they keep performing as they have so far, I would grade them as excellent. 90454


Comments
One year in and they are working very well. I did not test them terribly much this past year, but I have to say what we have done has all gone very well. I am very happy with this purchase and have no complaints.
Brian H - 01/23/2015

8858

- AL60732
by:
Toyota Sienna

I am very satisfied with this setup, installed quickly and easily. The van rides and handles better weather empty or full, and it really is nice to not have everyone flashing me at night when the whole family is in the car(low beams). I installed these on my Sienna AWD van, and did invert them so the air connections were at the top of the spring for better air hose routing. In doing so, I lost the shims. The best part was that I emailed AirLift customer service to see if I could purchase the shims. Let's just say I am more than impressed with their response. You dont find customer service like this, they were responsive, and sent me new spacers asap. I would highly recommend these to anyone. 54148



- AL60732
by:

These installed well and seem to work well. They keep my minivan level when pulling a utility trailer, reducing instances of the tongue bottoming out when crossing aprons. 589336



- AL60732
by:
2017 Toyota Sienna

I used these airbags on my 2017 Toyota Sienna AWD. I have towed a motorcycle trailer, with 2 motorcycles attached to it, 6 of us in the van, the van loaded with luggage and the 21 cubic foot cargo box on the roof for over 4,000 km with no issues. The van rear suspension only dipped 0.5”. The van drove like normal and there was no difference in ride comfort. 706631



- AL60732
by:
2008 Toyota Sienna

I have a 2008 Sienna and did the older install where the valves were mounted to the hitch, rather than through the car jack area. I also used wire loom 1/4" diameter throughout the install for extra protection and used metal loom clamps with self drilling screws as the install video showed for 2006 Sienna's. The install took about an hour once I figured everything out. I didn't do the tee fitting with only one valve because it was plastic, but I heard you can order a brass tee that might be more durable. However, since one line is longer than the other to my valves, I notice that it is difficult to completely sync up the psi, so I would do the tee fitting if I do on another vehicle. I didn't measure exactly, but definitely with the eye test the Air Lift system kept the back end up under a heavy load with hitch mount bike rack loaded with 4 bikes. I could also feel less sag and bounce when going over bumps and a more stable ride under load. So far so good, we'll see how all the parts last when they have to go through a few winters. But for now, works great. 220032



- AL60732
by:

The product is holding up great. (Pun intended). The van doesn’t sag in rear then loaded with all the kids and I can add a little pressure to keep it level when we are towing. Thank you etrailer for all the reality and support you have to help help us install the products you sell. 665892



- AL60732
by:
2013 Toyota Sienna

This product is an excellent value. I installed on my 2013 Toyota Sienna FWD in a couple of hours, using the instructional video as a reference. When I filled up the bags to 30 PSI and hitched up my pop-up trailer, there was no noticeable sag in the rear suspension. I have yet to take the rig out on a long trip, but first impressions are very good. 208150



- AL60732
by:
2008 Toyota Sienna

Finally got to test these out almost a year later as our Labor Day camping trip brought on the weight in our Sienna van. I have a cargo hitch loaded with about 150lbs and a fully loaded Thule top box, 100L cooler, 4 people. Last year the rear tires were deep in the wheel wells. This year I pumped them up to 28PSI to give room for possible heat changes on the east side of the state. Raised up the rear tire PSI by 3 and this combo provided a very stable ride. Van road almost perfectly level. They also hold their air. I have not once had a leak in this last year. I keep them pumped to 13psi for normal use and between 20-30psi for extra loads. Took about 3hrs to install with taking my time. Actually rather easy to do , hardest part is routing the air lines and protecting it from the elements,heat and movement. Get some of the extra accessories they offer for this install, they are cheaper and save time compared to driving to the hardware store. I didn't pay attention to them until after I was installing and decided I wanted some extra protection for the air lines and a few other things. I don't know how well these would do with more than lighter loads like a small trailer or fully loaded down vehicle. I think the higher end models might be worth a consideration if you have some more serious tasks at hand like heavy towing. Great addition to our van. 291962



- AL60732
by: 09/05/2020

874498



- AL60732
by: 08/14/2020

861888



- AL60732
by:
Toyota

Fit my 2019 Toyota Senna AWD perfectly. Easy to install. didn't even have to disconnect exhaust hanger as instructed. instead i used a 1/2 drive universal joint with sockets to access bolt holes on passenger side. I pull a 2500lb boat or a 2000lb trailer with no problems. I use 15 to 30 lbs air pressure to keep level. i used two valves and separate air for each bag. I didn't want it shifting in long turns. I highly recommend and would buy again.... 854712



- AL60732
by:

For the most part, these bags have worked really well. I did have one problem with one getting punctured on a trip, which wasn't fun because the suspension was weak afterwards. Airlift's customer service was amazing, though, and sent me two replacement bags. I did opt to buy a metal T to install with the bags after reading some reviews, and everything has worked out well. 848979



- AL60732
by:

Never Ride Whitney it 847319



- AL60732
by:
2014 Toyota Sienna

I installed these on my 2014 Toyota Sienna van that I sometimes use to pull a boat. They were relatively easy to install and make a significant difference when towing. 816909



- AL60732
by:
2012 Toyota Sienna

Good value and nice quality 791615



- AL60732
by:
2020 Kia Telluride

A little difficult to get bags in place but video was very helpful. I am testing it by driving around with 30 psi unloaded. For [the price] this is a great idea. Even great for when you are just carrying a load of 7 or 8 people! I put one air valve in the side of trailer hitch. (see pic 2) 789815



- AL60732
by:
Toyota Sienna

We've had our Air Lift 1000 for a year now and are just as happy with it as the day it was first installed. Whenever we had any weight in the back of our Toyota Sienna, the towing hitch would scrape on approaches with any decent slope. Now we can load up the back, including a bicycle rack, the scraping is slight to nonexistent. Very happy the Air Lift 1000 solved the issue, and it has held up very well. Thank you Etrailer! 762643



- AL60732
by:

Works great! Easy to install 747111



- AL60732
by:

Works as advertised. I also mounted with the air line nipple on top after accessing the risk of damaging the air line if on bottom. The drawback would be that condensation could collect in the bags and not get blown out when deflating the bags. This concern to me is negligible since I am not airing up the bags on a constant basis as would be the case of a workshop air compressor tank. I used the Tee fitting and a single schrader valve. Advantages: bags maintain a constant pressure, both bags will deflate equally if there was an air escape, a single bag is not overpressured when the suspension articulates, suspension articulation is not hindered as the air can travel from one bag to the other. Disadvantage: cornering stability is not enhanced by air bags since air can freely travel from one bag to the other. I do not see the cornering stability as an issue for my situation because my reason for using the bags is to help level the vehicle when towing a trailer. The tongue weight force is applied at a low point on the chassis and most likely does not raise the center of gravity of the loaded vehicle. If I were only loading heavy items on the roof rack or raising the center of gravity significantly and wanted less body roll in turns, only then I would consider having the bags individually inflated. 729244



- AL60732
by:

Totally Love the Product! 725106



- AL60732
by:
2018 Toyota Sienna

I used this kit on a 2018 Sienna to help support the back springs while towing a ~2500 lb pop-up camper. Installation was straightforward and it has held up well so far, and definitely helps with rear end sag. Be aware that it doesn't help with weight distribution. The only minor issue is that the air filler valve / hardware rusts. Not a big deal, but it looks bad up close. Note: On my 2018 Sienna (and I think on most/all model year Siennas) they should be installed with the air inlet pointing up. The instructions indicate the air inlet should point down, but doing so results in the air hose being exposed to damage from the ground/terrain. 717440



- AL60732
by:

I had my favorite mechanic install the air bag system. After 6 months of use, the driver’s side bag developed a hole. This appears to be from interference with the coil spring in which the bag fits. I ordered a replacement kit from E/trailer but have yet to install the new bag. The system worked great as long as the bags maintain their integrity. But, I’m disappointed in the poor longevity of the product. 700449


28
414
Show More Reviews

Ask the Experts about this Air Lift Vehicle Suspension

  • Will the Air Helper Springs for Coil Springs Raise the Ride Height of a Vehicle
    The Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60732 which is a confirmed fit for your 2016 Toyota Sienna will not raise the ride height of your vehicle. It will however prevent the rear of the vehicle from sagging while attached to a trailer which will therefore give you additional ground clearance. If you have a 2" trailer hitch receiver on your Sienna then you can use the Ultra-Fab Steel Roller part # UF48-979020 to prevent the receiver tube from scraping on...
    view full answer...
  • What Is Needed To Install AirLift 1000 Air Helper Springs On a 2006 Toyota Sienna
    The Air Lift AirLift 1000 Air Helper Springs part # AL60732 which is a fit for a 2006 Toyota Sienna comes with everything that you need for installation except for a jack and jack stands. The reason you need these is to decompress the coil springs so you have enough room to slide in the air bags in but aside from that you don't need anything else. That said, I would however add the Replacement Inflation Valve Bracket for Firestone Air Command Compressor Systems part # FWR17607560 to...
    view full answer...
  • Recommended Suspension Enhancement for Towing with a 2016 Toyota Sienna
    To help out the suspension on your 2016 Toyota Sienna while towing your camper I recommend using the Air Lift AirLift 1000 Air Helper Springs # AL60732. This kit gives you the ability to adjust how much help your suspension gets and you can reduce the air bags to 5 psi for factory ride quality when you aren't towing. Other kits that replace the bump stops don't give you this ability and they can make the ride uncomfortable when the vehicle isn't under a load. A quick and easy way to...
    view full answer...
  • How to Reduce Sag On a 2013 Toyota Sienna When Pulling a Trailer
    There are a few options to help reduce the sag on your 2013 Toyota Sienna when pulling a trailer. I recommend Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear Item # AL60732. These are air bags that fit inside your factory coils. Instillation is fairly simple. The air spring can be adjusted to a maximum of 35 psi and a minimum of 5 psi with a load leveling capacity of 1000 lbs. You can adjust the air pressure in the bag depending on the weight to bring the back of the vehicle...
    view full answer...
  • Rear Suspension Enhancement for 2006 Toyota Sienna to Prevent Sag When Towing
    Suspension enhancement is what you are needing to prevent the sag and dragging you mentioned. So for your 2006 Toyota Sienna the Air Lift kit part # AL60732 that you referenced would be a great option for this that is a confirmed fit. When needed you can inflate the air bags and the sag will go away.
    view full answer...
  • Is There Risk of Rollover When Installing Air Lift # AL60732 With Single Fill Valve on 2006 Sienna
    Actually, that's an excellent question that I've always been curious about as well. I spoke with my Air Lift representative about your concerns about using the Tee fitting when installing their # AL60732 air suspension on your 2006 Toyota. Installing the system using the tee fitting and the single Schrader valve as a filling point CAN allow air to migrate from one spring to the other, but my representative tells me that your Sienna will still have the coil springs in place to provide...
    view full answer...
  • Do AirLift 1000 Air Helper Springs for 2013 Toyota Sienna Get Installed Protector on Top or Bottom
    You can install the Air Lift AirLift 1000 Air Helper Springs for Coil Springs # AL60732 on your 2013 Toyota Sienna with the protector on either top or bottom, depending on the direction you want the air hose to be. The protector will be on the bottom if you have the air hose stem facing the bottom (like in the linked directions I added) or it can be on top, like in the linked install video of these springs on a '13 Sienna.
    view full answer...
  • Installation Difficulty for AirLift 1000 Rear Helper Springs, part # AL60732, in 2004 Toyota Sienna
    To install the AirLift 1000 Rear Helper Springs, part # AL60732, in your 2004 Toyota Sienna you will need to either jack up the rear of the vehicle or raise it on a hoist and support the vehicle frame with safety stands. This is necessary to allow the rear suspension to fully extend for insertion of the helper springs. It is not necessary to dismantle the suspension system. Apart from this you will need only basic tools. Installation consists of slipping the deflated air spring cylinder...
    view full answer...
  • Recommended Air Suspension System For 2005 Toyota Sienna For Towing
    The first thing you want to do is make sure you are not overloading the trailer or the back of your Sienna, causing it to sag. From the measurements we have taken with hitch installations on vehicles like yours, there should be at least 7 inches of clearance between the bottom of the hitch and the ground. We may be able to recommend something that will help you out when you are towing. If your suspension is in good working order I recommend installing a suspension enhancement system...
    view full answer...
  • Recommended Air Lift Helper Springs for 2005 Toyota Sienna
    The Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear # AL60732 are a confirmed fit for your 2005 Toyota Sienna 2WD. We don't recommend installing the air bags in any way other than the manufacturer specifies. The kit does come with the t-connector if you choose to use one Schrader valve instead of two. I've attached an installation video to assist. You also have the option of adding an onboard compressor like # AL25592 to monitor and adjust your air pressure.
    view full answer...
  • Rear Axle Air Spring Kit and Compressor Kit for 2013 Toyota Sienna AWD
    Yes, the Air Lift rear-axle air bag suspension kit # AL60732 will fit your 2013 Toyota Sienna with all wheel drive and it also fits the 2WD models as well. An installation video and the written instructions are linked for you. This type of helper spring kit can go a long way toward reducing the rear-end sag in vehicles like the Toyota Sienna and Honda Odyssey that tend to have low-slung suspensions. This kit will provide useful stiffening of the rear suspension to help reduce bottoming...
    view full answer...
  • Will Air Lift Suspension Enhancement System Increase Tongue Weight Capacity On 2015 Toyota Sienna
    Using a suspension enhancement system like the AirLift 1000 Air Helper Springs, part # AL60732 will not increase the load-carrying or tongue weight capacity of your 2015 Sienna. These are designed to help cushion heavy loads and help keep the vehicle level. This air pressure in this system can be adjusted between 5 psi and 35 psi. This system will give you up to 1,000-lbs of support and help prolong the suspension of your Sienna. If you want to be able to adjust the level of air...
    view full answer...
  • Will Air Lift Helper Springs Help Rear End Sag On 2010 Toyota Sienna When Carrying Bikes
    The Air Lift AirLift 1000 Air Helper Springs, part # AL60732, are designed to fit your 2010 Toyota Sienna. They will help prevent the rear end sag you have when your have your bikes all loaded up. These air bag fit inside the coil springs on your Sienna and will help reduce the stress on your Sienna suspension. I have attached a link to an installation video for this system on a Sienna you can check out. For easier control of the air spring system, I recommend the Air Lift Load Controller...
    view full answer...
  • Air Lift 1000 Air Helper for Coil Springs Installation Hose on Top or Bottom?
    The Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear # AL60732 can be installed for the air hose to be installed from the top or the bottom. The installation instructions give you the air hose routing from the bottom, but we have found the installation from the top to be easier in order to protect that air line. Their installation video of this product also uses the installation where the hose comes from the top.
    view full answer...
  • Recommended Weight Distribution/Sway Control System for 2010 Toyota Sienna
    For a camper trailer towed by a passenger van like your 2010 Toyota Sienna the best handling-enhancement item is usually going to be a weight distribution/sway control system, rather than a vehicle suspension enhancement kit. Weight distribution (WD) moves some of the trailer's tongue weight (TW) forward onto the Sienna's front axle; this restores steering and braking performance and reduces rear end squat. A system with built-in sway control will also help reduce the trailer's tendency...
    view full answer...
  • Solution for 2016 Toyota Sienna Carrying Wheel Chair Carrier that Sags and Drags
    Your best option to reduce the sag that is causing the suspension sag will be rear suspension enhancement that fits your 2016 Toyota Sienna like the Air Lift part # AL60732. This will give you air suspension support when carrying the chair which will get rid of the sag and prevent dragging. And when not carrying it you can reduce the air pressure and have your normal ride quality.
    view full answer...
  • How to Prevent Limited Ground Clearance on a 2017 Toyota Sienna
    I have two options for the limited ground clearance you have on your 2017 Toyota Sienna. The first option as you mentioned would be to install a different trailer hitch. The trailer hitch we have for your Sienna that will offer the most ground clearance is the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7255 which from the ground to the top of the inside edge of the receiver tube is 13-1/4". The other option you have will prevent the hitch from scraping the ground but it will...
    view full answer...
  • Recommended Best Trailer Hitch Receiver for Ground Clearance on 2018 Toyota Sienna
    There is not a minimum clearance required by law for a trailer hitch, so you simply want to make sure you are able to travel without bottoming out your receiver. For instance, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13105 has a dimension of 12 inches from the inside top of the receiver which means approximately 9 inches from the ground to the bottom edge due to the lower the side brackets. If you are concerned about that ground clearance restriction, then...
    view full answer...
  • Dimensions Of Heat Protector For Air Lift AirLift 1000 Air Helper Springs
    The Replacement Heat Protector for Air Lift AirLift 1000 Air Helper Springs part # AL09119 replaces a damaged heat protector for AirLift 1000 air helper springs # AL60202, # AL60232, # AL60279, # AL60317, # AL60323, # AL60702, # AL60732, 60773, # AL60779, # AL60817, # AL60823, # AL80237, and # AL80537. The diameter of the heat protector is 4" in diameter by 1" thick. They do come in various sizes so you wan't to make sure you have one of the systems or springs I listed for the heat protector...
    view full answer...
  • Rear Axle Firestone Air Bag Suspension Enhancement Kit for 2014 Toyota Sienna 2WD
    Van-style vehicles like the Toyota Sienna and Honda Odyssey do sit fairly low in the rear end. By the time you add the presence of a trailer hitch, load some cargo and passengers, and apply the hitched trailer's tongue weight (TW) to the hitch ball you can absolutely find yourself looking for some extra support for the rear suspension. The linked page shows you the options for your 2014 Sienna 2WD and these include both air bag kits # AL60732 and # F4155 and a rubber jounce spring kit...
    view full answer...
  • Comparing the Timbren and Air Lift Suspension Enhancement Kits for a 2008 Toyota Sienna
    Both the Timbren Rear Suspension Enhancement # TTORSEN04 and the Air Lift 1000 Helper Springs # AL60732 work in conjunction with the rear coil springs of your 2008 Toyota Sienna van. The Timbren system uses 2 Aeon hollow rubber springs that fit inside the Sienna's coil spring. The rubber spring provides additional support by increasing resistance between the upper rubber spring and the lower mount that is attached to rear axle. So, when weight is added to the rear of the van, the Timbren...
    view full answer...
  • Comparing the Timbrens and Air Lift Airbags for a 2014 Toyota Sienna
    In order to help support the weight of the hitch mounted bike rack on your 2014 Toyota Sienna, I recommend using the Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60732 over the Timbren Rear Suspension Enhancement System part # TTORSEN04. The reason for this is because the Timbrens are only going to engage once the threshold of your suspension is reached. The weight of your bike rack and four bikes might not allow for this so you will want to use the Air Lift airbags...
    view full answer...
  • Parts Needed to Tow Trailer with 2009 Toyota Sienna AWD
    First thing you'll need is a trailer hitch installed on your 2009 Toyota Sienna like the Draw Tite part # 75237 which is a confirmed fit for your vehicle and is compatible with weight distribution. I attached an install video for this for you to check out as well. For a weight distribution system you'd want the Reese Strait Line part # RP66082 which has a 200 to 600 lb tongue weight range and features only sway control available that works to fight sway before it starts. If you flip the...
    view full answer...
  • Rear Coil-Rite Helper Springs for a 2013 Toyota Sienna Do Not Require a Heat Shield
    The Coil-Rite helper springs # F4155 fit inside of the rear coil springs on your 2013 Toyota Sienna. The exhaust is not close enough to cause any problems. Also, the coil springs themselves would also help dissipate any heat. I have included a link to a video showing an example installation for you. Like you said, the Air Lift springs # AL60732 do come with a heat shield as a fail safe. I have linked a video of this kit as well. The Air Lift system is a good value so if the heat shield...
    view full answer...
  • Suspension Enhancement Recommendations for 2012 Toyota Sienna
    The SumoSprings # CSS-1168R that you referenced will install between the coils of your springs as shown in the photo I provided. They will make the springs harder to compress, but will not provide additional ground clearance. This is a passive system, that will allow no adjustment. The folks at SumoSprings do not recommend using more than one set of springs per axle, as additional springs would make for a harsh ride. In your situation, even though the idea of having air lines does not...
    view full answer...
  • Suspension Enhancement Fit for 2014 Toyota Sienna AWD
    I have a solution for you, but unfortunately the Firestone Coil-Rite Air Helper Springs # F4155 are not confirmed to fit your 2014 Toyota Sienna AWD. I spoke with my contact at Firestone and he confirmed they do not list this kit as a fit for the AWD Sienna. For a coil spring suspension enhancement system, I recommend the Air Lift 1000 Air Helper Springs for Coil Springs # AL60732 because they are confirmed to fit your Sienna AWD and are similarly designed to the Firestone air bags....
    view full answer...
  • Additional Items Needed to Tow Sportsmen Classic with 2013 Toyota Sienna
    It looks like you have done your research! According to the information found on page 801 in the owner's manual, for trailer's with brakes the 2013 Toyota Sienna has a Trailer Weight Rating (TWR) of 3,500 lbs. The TWR includes the actual weight of the trailer as well as the weight of your cargo. Toyota also states that the gross trailer weight should be distributed so that the tongue weight is 9 to 11 percent of the trailer's weight. With this being said, the Sportsmen Classic that...
    view full answer...

Do you have a question about this Vehicle Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality vehicle suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate vehicle suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Sue W
Video by:
Andrew K
Video by:
Andrew L
Updated by:
Tricia G
Updated by:
Mary E
Updated by:
Sarah W
Updated by:
Alex H
Test Fit:
Nicholas E
Test Fit:
Shane T
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.