bing tracking image
Customer Service My Orders
  1. Accessories and Parts
  2. CURT
  3. Trailer Wiring
  4. Mounting Hardware
  5. Brackets
  6. 4 Flat
  7. 5 Flat
  8. 6 Round
  9. 7 Round
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
Add to Cart
Used (1) from $25.95
CURT

Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch

Part Number: C58000
170 Reviews | 138 Questions
In Stock
$27.38
Retail:$39.15
You Save: 30%
 Accessories and Parts
1 used item available at $25.95
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt accessories and parts trailer wiring 4 flat 5 6 round 7
curt accessories and parts brackets 4 flat 5 6 round 7 easy mount bracket for 4- or 5-way 6- 7-way trailer connectors - 2 inch hitch
curt accessories and parts trailer wiring mounting hardware easy mount bracket for 4- or 5-way flat 6- 7-way connectors - 2 inch hitch
curt accessories and parts mounting hardware 4 flat 5 6 round 7 c58000
curt accessories and parts brackets 4 flat 5 6 round 7 c58000
curt accessories and parts mounting hardware brackets
curt accessories and parts trailer wiring brackets easy mount bracket for 4- or 5-way flat 6- 7-way connectors - 2 inch hitch
curt accessories and parts mounting hardware brackets
curt accessories and parts trailer wiring 4 flat 5 6 round 7
curt accessories and parts mounting hardware brackets c58000

Show All (10) Product Images

Show Fewer Product Images

In Use/Installed

2005 hyundai tucson accessories and parts curt trailer wiring brackets c58000
2005 hyundai tucson accessories and parts curt mounting hardware 4 flat 5 6 round 7 c58000
2005 hyundai tucson accessories and parts curt mounting hardware brackets c58000
2005 hyundai tucson accessories and parts curt brackets 4 flat 5 6 round 7 c58000
2005 hyundai tucson accessories and parts curt trailer wiring 4 flat 5 6 round 7 easy mount bracket for 4- or 5-way 6- 7-way connectors - 2 inch hitch
2005 hyundai tucson accessories and parts curt trailer wiring brackets easy mount bracket for 4- or 5-way flat 6- 7-way connectors - 2 inch hitch
2005 hyundai tucson accessories and parts curt mounting hardware brackets on a vehicle
2005 hyundai tucson accessories and parts curt trailer wiring 4 flat 5 6 round 7 on a vehicle

Show All (8) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch customer photo

Show All (22) Customer Images

Show Fewer Customer Images

Videos

Show All (3) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required. 1-800-940-8924 to order CURT accessories and parts part number C58000 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Related Parts
  • Photos
  • Used (1)

CURT Accessories and Parts - C58000

  • Trailer Wiring
  • Mounting Hardware
  • Brackets
  • CURT
  • 4 Flat
  • 5 Flat
  • 6 Round
  • 7 Round

Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required.


Features:

  • Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily
    • Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector
    • Fits 2" x 2" trailer hitch receivers
  • Sturdy steel construction is long-lasting
  • Black powder coat finish resists corrosion
  • Notched design allows for access to pin and clip or hitch lock
  • Fast, simple, no-drill installation
    • Fit bracket over hitch receiver opening and secure around lip with included hardware
  • Dimensions: 10" long x 3-1/4" tall
    • Edge is 1-5/32" at widest point


Specs:

  • Overall dimensions: 10-1/2" wide x 3-1/4" tall x 1-1/8" deep
  • Diameter of mounting hole: 2-1/16"


Dimensional Diagam



58000 Curt Easy Mount Combo Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat and 6-Round or 7-Round Plugs







Customers Who Purchased This Accessories and Parts Also Bought...



Customer Satisfaction Score:

Ratings & Reviews

4.6

170 reviews
5 Stars
(125)
4 Stars
(27)
3 Stars
(9)
2 Stars
(5)
1 Star
(4)
Review Sort Icon
by:
This is a great option when adding a hitch to a car that doesn’t come with a factory mounting point for your trailer 7 line trailer power hookup.
Customer Large Image
Customer Image
Click to Enlarge
Heather A. profile picture
Etrailer Expert

Heather A.

9/30/2026

Install looks great Jerry! Do you do a lot of towing?

by:
This bracket is made to be very easy to install but I did have some difficulty attaching my "Buyers Products Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat" to due to the way the hitch on my 2004 Toyota Sienna is set up. It still was pretty quick to install with the adaptor I mentioned above, about 30-45 minutes. I recommend using this bracket for most of all of the 4-way to 6/7-way and 4-way adaptors on etrailer, since the 4-way part of the adaptors is just friction fitted into the adaptor and may fall out over time.
by:
This is a good product with one serious caveat. It does make a neat way to mount your electric connections in a modern vehicle with lots of plastic in the rear bumper area. However, the thin gauge metal is prone to severe rusting if you live in snow country where roads are salted. I just replaced a 5 year old unit with the same thing because it's the only bracket I've found that does as good a job. The original unit was used with a Curt Echo brake controller and on the last trip it was so rusted that it would barely support the connections. Fortunately, the bolts and nuts that hold everything together are stainless steel so you can get them off for replacement when needed. The most challenging aspect to replacement is getting the bolts in that squeeze the bracket parts together to hold the whole thing to the hitch receiver tube. Depending on the vehicle, you may need to put the bolts in with heads down and it is tricky to get the nuts on when clearance to the plastic bumper is limited, like in our 2019 Hyundai Santa Fe. In such a case I would recommend Not mounting the 4 and 7 way wiring connectors until you've mounted the unit on the reciever. Then you're not working against the weight of the plugs during a tricky installation.
by:
Well made with a great finish and all quality installation hardware was included. Worked perfectly with the new Curt Class III 2 inch Receiver Hitch. Very easy install and while highly detailed instructions were included it was not really necessary as it’s very intuitive.
Customer Large Image
Customer Image
Click to Enlarge
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

6/4/2025

The bracket looks great on your hitch! What kind of trailer are you usually towing?

Ofisher profile picture

Ofisher

6/4/2025

@GwendolynY It varies. It’s on a 2003 GMC Sierra 2500HD Long Bed 4x4 truck replacing the OEM that got destroyed when I got hit in the rear by a car doing 35 mph while I was stopped. But over the years I’ve pulled large flatbed with my Farmall H on top. A 18 ft I/O Boat on a 24 ft trailer, a two horse trailer with horses, and a snow mobile flatbed I use for transporting motorcycles or my zero turn mower. That was with the OEM receiver hitch and while I haven’t used this, it is much more robust than the one it replaced. The connector bracket is a first, my OEM had its connector bracket welded to the hitch.
by:
Bought this to accommodate the factory 7 wire connector on my Toyota Tacoma along with a new hitch (my original hitch was rusted). Didn't realize the original connector slid in from the bottom, but this was easily modified to handle that by cutting the bottom and drilling 2 new holes for the factory connector. I could have used a new connector harness that was designed for this, but I didn't have one. Easy modification on this to make it work.

I will say it feels a little flimsy, so I'll be looking to reinforce it later on as time permits.
by:
Unusual way to install a bracket but there’s nothing under the bumper cover to mount a generic style mount.
by:
This bracket works well, but being at the same elevation as the receiver
opening. No more hitting the welded on RV connector bracket and tearing
up the connector. I cut my old bracket off as you can still see part of
it on my hitch. Painted the exposed metal to prevent rust.

A couple of suggestions for those installing this bracket. First use an
adjustable wrench and bend the top and bottom edges inward so the
bracket fits tight on your receiver end. Doing this will keep the
strain on the Stainless Steel M8 bolts used as they are too small to
bend the bracket edge and will snap off. Second use the appropriate
size metric wrench or socket to turn the nut. The nuts have an insert
to keep them from working off while driving, so no lock washers are used.

Installing the RV 7-way connector is just like installing it in any
other bracket, just locate the appropriate holes for your connector and
insert the screws. If your 7-way connector is plastic do not over
tighten the nuts. Installing the 4 or 5-way connector is even easier to
install.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
John profile picture

John

6/16/2019

It has work great as expected. Did sell vehicle in March

by:
Product is good basic design, remains to been seen how quickly bracket bends or distorts when plugging/ unplugging 7 way as thickness and strength is questionable.
It would have been a plus if product info informed buyers that some, including my Stowaway brand anti rattle hitch bracket cannot be used when using this c58000 wire holder. I have installed my anti rattle device upside down but not sure yet if going to work.
Customer Large Image
Customer Image
Click to Enlarge
Michael W. profile picture

Michael W.

11/13/2018

after a year of daily trailer towing I can report that my concerns of the lightweight metal used in build has been a issue with bending so far no splitting of metal just keep bending back, also mounting hardware light duty. would I buy this product again yes but would seek a more secure way of mounting

by:
Instructions were ambiguous for all kinds of applications.

Once you start tightening the bottom plate in, it bends into place as tight as you need it. No wiggle here.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/7/2025

The bracket looks great, Jonathan. Thanks for including the pics, especially the back view of what the bracket looks like.

by:
Super easy to install. It's actually is more rigid/solid than I thought. Comes with all the hardware you'll need. Definitely a good compliment to a hitch that doesn't have a bracket welded on.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Joe profile picture

Joe

3/6/2024

still going strong a year later. Still supper happy.

by:
This bracket fits my hitch receiver
Customer Large Image
Customer Image
Click to Enlarge
by:
Excellent fit and a good solution for my 2010 Mazda CX-7. Using a standard 7-way drop down L bracket wasn't going to work for my car.
by:
Nice black powder coat finish. Solid feel. Doesn't fit.

This Curt easy mount bracket doesn't fit my Curt class 3 trailer hitch #13355. Either the bracket is designed wrong or the chain hooks on the hitch are welded too close to the receiver collar. Can't install the screw and the bracket sticks out oddly at the bottom because of this.

One picture shows the gap of the bracket to the receiver collar and the screw unable to go through the hole, and the other picture has a closeup of the chain hook / bracket interface.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
It does thw job but I might try another mounting method in future
Customer Large Image
Customer Image
Click to Enlarge
by:
Rocks, curbs, parking stops...Bend and destroy your last electric brake car-side connector bracket. Finally there's a solution for those of us with plastic bumpers who don't have a lifted 4x4 or stock through-bumper socket. This bracket safely puts the vehicle side connector at the same height as the receiver itself!

I installed it on a 2002 Toyota Land Cruiser with factor hitch but this could work for my wife's Subaru so I'll probably get her one too. Anyone who needs to install a trailer wiring connector on low vehicles or on vehicles with rubber/plastic bumpers now can have a better solution.

After ruining 3 L-brackets and $30 connectors I was about to build my own but gladly Curt created a solution. Installation of just the bracket was less than 15 minutes. If you have an existing 2" tube-style hitch. Without measuring the installation was universal for 2" receiver hitches. The only issue might be if your receiver hitch and bracket is too close to the hitch crossmember but I believe the bracket was flexible enough to adjust.

In my opinion, the bracket could be 1/8" steel plate in case you accidentally back the trailer into it but time will tell if that becomes an issue. The bracket comes with fastening hardware which presumably is stainless with lock nuts but including thread lock compound might be a good option. I was able to snug up the bolts enough that the bracket no longer flexed. We're having some rainy weather that's preventing me from rewiring the new female socket connector that I also purchased.

On a side note, my original female socket had the 4-pin connector built into it. Instead this time, I ordered the Curt #57674 4-Way to 7-way RV Blade & 4-Way Flat socket. One important not is if you use this option, the Curt Bracket includes a mounting bracket that will separately hold the 4-pin plug. It may be a cleaner install to use the Hopkins integrated 4-way/7-way adapter instead of using Curt's side mount bracket for the bracket in this review.

Overall, this will buy me some time before I have to upgrade my Land Cruiser to steel bumpers. Essentially this $20 product saved me from having to lift the vehicle to deal with the ground clearance issue. Preserving the low center of gravity and street appearance was important. Even with that said, if you do lift your vehicle its just really nice to get this electrical work up out of harm's way.

All in all, kind of a no brainer easy replacement and because there's a gap in the mounting bracket for the female socket, you may not even have to rewire to upgrade. Just slide the wires of the old socket through the gap and reinstall the screws.
Customer Large Image
Customer Image
Click to Enlarge
by:
If I could give it 4.5 stars I would. Only less than 5 because the metal could be thicker. On the other hand, I could really tighten the screws at the receiver and bend the metal flush with the thicker collar and there is no wiggle. I had previously installed the Hopkins combo 4-flat with 7-round connector and it fit just fine as etrailer said it would. The only negative is Hopkins doesn't provide stainless steel screws for their connector. I also didn't install the harness according to the excellent video for my 2005 Sienna. Instead I ran all the wires inside the van by bringing them up through a grommetted hole already right where the connector belongs and then tucking them behind the trim panels all the way to the front. The door sill pieces come off easily to route wires under them.

Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
IT fit okay. The adaptors fit strangely but it was tight.
by:
This thing is janky. I'm using it on an etrailer hitch and it doesn't really match at all. The way it clamps to the hitch is not very secure, the spacers are funky and one of the bolts bent as I was trying to get it to not jiggle loose. It feels like cheap junk you get from Amazon or eBay.

I fear this thing will just fall off while I'm driving and cause havoc.
by:
Works great! Makes getting to the 7-way lots easier!
Leland profile picture

Leland

4/1/2026

This item is still holding up very well and still looks like new.

by:
The two 90 mm carriage bolts are not heavy enough to start with and one stripped out when i started to put torque onto the nut. I am in chat right now trying to get a replacement.
by:
Sent without the parts that go with it to install.
by:
This is a pretty elegant way to mount the 7-pin connector, especially compared to other options.
Customer Large Image
Customer Image
Click to Enlarge
by:
Excellent fit was great no issues
by:
Received the part I ordered,was exactly what I needed.Enclosed is a pic of it installed.Thanks !
Customer Large Image
Customer Image
Click to Enlarge
by:
The part fit very well and seems sturdy enough. I used it last summer and it still seems to be holding up well.
Customer Large Image
Customer Image
Click to Enlarge
John B. profile picture

John B.

3/30/2024

After one year, the product still worked great. It was stable and held up to use.

25
170
true
Show More Reviews

See what our Experts say about this CURT Accessories and Parts

Do you have a question about this Accessories and Part?
  • 7-Way Wiring Harness And Trailer Brake Controller For A 2024 Honda Pilot Trailsport
    We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector # C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting the # C58000 mounting bracket which will allow you to mount the 7-way plug right next to the hitch. For a brake controller my recommendation in the Redarc Tow-Pro Liberty # RED24FR. The main reason I recommend this one is because it takes...
    view full answer...
  • How to Mount a Trailer Connector to a Trailer Hitch Receiver
    Yes, we sure do! In order to mount your trailer connector on the rear of your vehicle, you will want to use part # 18140 along with part # 18144 for 4-way or part # 18136 along with part # 18138 for 7-way trailer connectors. I have attached a review video of the no-drill mounting bracket for you as well.
    view full answer...
  • Receiver Mounted Trailer Wiring Harness Mounting Bracket for a 1-1/4 Inch Trailer Hitch Receiver
    I have a couple solutions that will work for you. At this time, the only receiver mounted bracket for a trailer wiring harness available is for a 4-way trailer connector, part # C58002. I've attached a picture that shows how it mounts and how the 4-flat wiring harness fits. Again, this is the only wiring harness bracket that mounts to a 1-1/4 inch receiver. They don't make a bracket for a 7-way trailer connector because most vehicles with a 1-1/4 inch receiver aren't towing trailers with...
    view full answer...
    Image 1 for
  • Recommended Brake Controller for a 2020 Kia Telluride
    For your 2020 Kia Telluride you need to start off with the T-Connector Wiring # CU94FR which plugs into a connector under your vehicle on the driver's side. Then for a brake controller I highly recommend using the Curt Echo # C51180 because you adjust the settings with your smart phone via Bluetooth and it can easily be stored in your glove box when not in use. Since this brake controller plugs into the 7-Way at the back of your Telluride you retain the OEM look on the inside of your...
    view full answer...
  • Wiring Recommendations for 2020 Hyundai Palisade Limited
    For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness # CU94FR. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4 way like your...
    view full answer...
    Image 1 for
  • Recommended 2020 Subaru Outback Trailer Hitch Receiver and 7-Way Plug With Brake Controller
    The easiest trailer hitch receiver installation is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT73RR for your 2020 Subaru Outback. It is the only option we have that doesn't require removing the bumper which is definitely more time and labor intensive. This will utilize holes already in your frame so no drilling is required. You will need to modify a heat shield and the entire installation will take approximately 40 minutes. The Curt T-Connector...
    view full answer...
  • How to Mount a 7-Way Connector on a 2017 Nissan Pathfinder with the Curt Hitch # C13309
    If you were to install the Curt Trailer Hitch Receiver # C13309 on your 2017 Nissan Pathfinder then you would need to mount the Curt T-Connector # C56357 directly to your rear bumper fascia using the mounting bracket # PK12711U. To avoid this you can use the Curt Easy Mount Bracket # C58000 instead. Since the Draw-Tite Trailer Hitch # 76031 does sit below the rear bumper fascia you would be able to use the no-drill mounting bracket # C57202 along with the part # PK12711U. The Curt T-Connector...
    view full answer...
    Image 1 for
  • Options for Mounting a 7-Way Connector on a 2023 Grand Cherokee L
    You're not really in a good spot to mount the Curt Trailer Connector Adapter item # C57672 to the Curt Hitch item # C96NR on a 2023 Grand Cherokee L. The Curt Easy Mount Bracket item # C58000 should not have been used for that set up though. There was definitely no need to drill into your hitch to mount it either. It's advertised clearly as a no-drill option. The competitor you're talking about is Mopar and their pn 82219040AA hitch has a cut out for a 7-way to be imbedded inside of it....
    view full answer...
  • Full Trailer Towing Set Up For A 2025 Hyundai Palisade SEL Premium
    Hi Jacob, congrats on the new ride! We found the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13427 to not need any trimming when we installed it, so it is definitely the one I recommend. The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector # TK64CR will make getting a 7-way and brake controller a lot easier as well, so it is the best choice. You will need a bracket to mount the 7-way, and we do have a few options for...
    view full answer...
  • 7-Way Trailer Connector Mounting Bracket for 2021 Subaru Outback
    The EcoHitch # EH34FR doesn't provide an integral bracket for installing a 7-way trailer connector. We offer bracket mounts that usually work pretty well, which will use a pipe clamp to attach to the hitch crossbar, but because the crossbar will be buried behind the bumper cover once the installation is complete, that wouldn't be a good option in this case. The Curt # C58000 Easy Mount bracket would be your best bet.
    view full answer...
  • Bracket To Attach 7-Way To 2017 Mazda Cx-5 Curt Hitch
    We have quite a selection of mounting brackets. My favorite that will fit your Curt Trailer Hitch Receiver # C13315 is the Mounting Bracket for 7-Way # 18138. The hose clamp is used to secure this bracket to the trailer hitch. I have attached a link with some available brackets to this answer page.
    view full answer...
  • Should Trailer Wiring Harness for 2024 Hyundai Palisade Cause Running Lights to Stop Working
    Hey Mike, it really shouldn't since the harness only uses the light circuits of the taillights as signal wires and draws power from the battery. If it was the harness I would have assumed the problem would have happened immediately. Did you check the fuses for this circuit in the fuse box.
    view full answer...
  • Compatibility of Curt Easy Mount Bracket on Draw-Tite Trailer Hitch and J-Pin of 2015 Subaru Outback
    The Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch # C58000 is a great option for you and won't interfere with your J-Pin # 63201. This mount fits the collar of the hitch snugly so it will not interfere. This combination will give you the stability you desire for your ball mount, the location accessible for your 7-way connector, and compatibility with the Draw-Tite Trailer Hitch # 76227 on your 2015 Subaru Outback
    view full answer...
  • Recommended Mounting Bracket for a 7-Way Connector
    Hey Richard. I didn't see any pictures but you can send them to the email you receive this response from and I'll be happy to take a look at them. I can't see your order information either but it sounds like you have something like the item # ETBC7 installed. I wouldn't use the Curt Easy Mount Bracket item # C58000 as a solution to your problem. Instead I would install the No-Drill Mount Bracket item # 18136. The Mounting Bracket item # 18136 wraps around your hitch receiver with a...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for 2017 Nissan Pathfinder
    The trailer hitch I highly recommend for your 2017 Nissan Pathfinder is the Curt # C13309 because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class III, 2" trailer hitch is almost entirely hidden behind your bumper, has a black powder coat finish to protect it from corrosion and also has a 6,000 lb towing capacity and 600 lb tongue weight capacity. The Curt # C13309 is made in the USA and comes with...
    view full answer...
  • 2025 Hyundai Santa Fe Curt Hitch and Wiring Parts Needed
    Hey Alex, thanks for reaching out! In order to get the same setup as Jonathan C. who left that review, you'll need the following parts; - Curt Trailer Hitch Receiver # C37RV - Curt T-Connector Vehicle Wiring Harness # C48RV - Curt Easy Mount Bracket # C58000 What are you planning to use this setup for?
    view full answer...
  • Parts Needed To add A 7-Way To A 2019 Honda CR-V
    Hi Eric! We have exactly what you need to get a 7-way set up on your 2019 Honda CR-V. If you don't already have one, you will need to start with the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118741. This will get you most of the way there, and then the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 will get you the rest of the way. It will piggyback off the 4-flat and includes all the other parts...
    view full answer...
  • No Drill 7-Way Mounting Bracket for a Hidden Hitch and Towing Set Up for a 2022 Outback Premium
    I would be happy to help you and make a recommendation based on fitment. First of all you won't have to drill into anything to mount your 7-way vehicle connector. All you will need is the Curt Easy Mount Bracket item # C58000. This bolts directly to your 2" x 2" receiver and has an opening for the safety chain loop. I linked an installation video below so you can see how easy this bracket is to install and use along with a picture of the item # ETBC7L installed with it. I can not find...
    view full answer...
    Image 1 for
  • Recommended Hitch w/ Best Ground Clearance for a 2019 Toyota Sienna
    Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do and time consuming as it may seem. As far as the hitch with the best ground clearance there are four for your 2019 Sienna and they're all going to be the same. When we test fit the Draw-Tite Hitch item # 76112, Curt Hitch item # C13343, etrailer...
    view full answer...
  • Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota Highlander
    The main difference that you will see is the Curt Trailer Hitch Receiver # C45CR has a visible cross tube where the Curt Trailer Hitch Receiver # C99FR has a hidden cross tube. So when you have these mounted on your 2022 Toyota Highlander Limited you will either see just the receiver slot and chain loops that hangs down, or you will see the receiver and cross tube that attach to the mounting plates on the left and right frame rails. I have included images so that you can see the difference...
    view full answer...
    Image 1 for Image 2 for
  • Adding a 7-Way Trailer Connector to a 2020 Ford Explorer Without Factory Tow Package
    To add a 7-Way to your 2020 Ford Explorer you first need the T-One # 118599 to add the basic trailer light functions. This tees in behind your tail lights and then draws power directly from your vehicle battery. Then for the 7-Way you also need the Universal Wiring Kit # ETBC7 which connects to the T-One and then has some wiring that is routed to the front of your Explorer. Since you have the etrailer Trailer Hitch # e29YR installed on your Explorer you'll need to use the Curt Mounting...
    view full answer...
  • How to Mount 7 Way to 2019 Subaru Outback With Hidden Cross Tube Hitch
    I understand the frustration, manufacturers are making hitches more hidden and sleek. It's nice having the cross bar hidden, but it does make it challenging to mount wiring because that's the traditional spot. You can route the 4 pole wire out to the bumper through a grommet that is under the spare tire. I have done that many times to get the wires out towards the hitch, you'll just want to make sure the wire is protected and to seal the grommet up with some silicone # LT37467. You can...
    view full answer...
    Image 1 for Image 2 for
  • Mounting Bracket That Works With ETBC7
    The Curt Easy Mount Bracket # C58003 would not work for you because it is for a 2-1/2" hitch. Instead, you would want to use Easy Mount Bracket # C58000. Another simple option would be the Curt No-Drill Bracket # C57202. I've added links to video reviews of each option for you to take a look at.
    view full answer...
    Image 1 for Image 2 for
  • How to Mount 7-Way Connector on a 2020 Land Rover Range Rover Sport with a 2" Trailer Hitch
    Thank you for all of the information! The Draw-Tite # 75229 combined with the ZCI # 119250KIT and # ETBC7L wiring for the Curt Echo # C51180 is a fantastic combination for your 2020 Land Rover Range Rover Sport. To hold the 7-Way connector next to the 2" receiver of your Draw-Tite trailer hitch you just need the Curt Easy Mount Bracket # C58000. This basically secures around the 2" Draw-Tite receiver and then sits to the side so you can carry both wiring connectors that come with the ETBC7L...
    view full answer...
    Image 1 for


< Previous
123. . .6
Next >



Do you have a question about this Accessories and Part?


Used Items Available
Image of C58000

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$25.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video by:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!
Call 1-800-940-8924