Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long
(53 reviews)
Price: $75.66
Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long
Retail:$79.99
Our Price: $75.66
You Save: 5%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (53)
- Q & A (0)
- Photos
- Why etrailer?
Rampage Tailgate Light Bar
- LED Light
- Red and White
- Rampage
Universal-fit light bar adds style and flair to your ride with high-intensity red and white LEDs. Quick, simple installation with 3M tape. Just plug into your truck's 4-way trailer connector. Splicing is required only for reverse lights.
Features:
- Tailgate light bar illuminates when your stop, tail, turn signal, or reverse lights are activated
- Red and white LEDs are bright, long-lasting, and fast to activate
- Red lights activate for stop, turn, and tail functions
- White lights illuminate when in reverse
- Waterproof, fully sealed electrical system
- Diodes are suspended in clear urethane for protection from the elements
- Surface-mount technology (SMT) ensures quality, reliable performance
- Seamless look - light bar fills gap between tailgate and bumper
- 4-Pole flat connector has heavy-gauge wiring and fuse protection
- Simple installation
- Mount light bar with included automotive-grade 3M tape
- Plug bar into your 4-way flat trailer connector
- Splice the white wire into your vehicle's reverse lights
- DOT approved
Specs:
- Light bar length: 49"
- 1-Year warranty
LED Surface-Mount Technology
This light bar is built using surface-mount technology (SMT). This method of construction involves soldering LEDs directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And when would vibration be more likely to occur than when you are driving?
Waterproof Construction
The LEDs on this light bar are suspended in clear urethane for maximum protection from the elements. This protective coating helps to fully seal each diode - and the light bar as a whole - to create a waterproof system for your truck.
960137 Rampage Super Bright LED Tail Gate Light Bar - 6 Function - 49"
Item # RA960137
This Product Fits The Following Vehicles
- 2010 - 2022 Ram 1500
- 2019 - 2022 Ram 1500 Classic
- 2010 - 2022 Ram 2500
- 2010 - 2022 Ram 3500
- 2002 - 2013 Chevrolet Avalanche
- 1987 - 2010 Mazda B Series Pickup
- 2004 - 2022 GMC Canyon
- 2004 - 2022 Chevrolet Colorado
- 1987 - 2011 Dodge Dakota
- 2010 - 2011 Ram Dakota
- 2001 - 2010 Ford Explorer Sport Trac
- 1998 - 2021 Nissan Frontier
- 2006 - 2008 Isuzu I-Series Pickup
- 2006 - 2008 Lincoln Mark LT
- 1988 - 1995 Isuzu Pickup
- 1987 - 1995 Mitsubishi Pickup
- 1987 - 1997 Nissan Pickup
- 1986 - 1986 Nissan Pickup D21 Hardbody
- 1984 - 1995 Toyota Pickup
- 2006 - 2009 Mitsubishi Raider
- 1983 - 2012 Ford Ranger
- 1983 - 2004 Chevrolet S-10 Pickup
- 1983 - 1990 GMC S-15 Pickup
- 1991 - 2004 GMC Sonoma
- 1993 - 1998 Toyota T100 Pickup
- 1995 - 2019 Toyota Tacoma
Customer Reviews
Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long - RA960137
Average Customer Rating: 4.9 out of 5 stars (53 Customer Reviews)
Universal-fit light bar adds style and flair to your ride with high-intensity red and white LEDs. Quick, simple installation with 3M tape. Just plug into your truck's 4-way trailer connector. Splicing is required only for reverse lights.
- RA960137
by: Robert09/05/2018
1175 Nissan Frontier
Happy with the result. Looks very well made and I hope will withstand rain and snow of upcoming winter. Plugged perfectly into the 7 to 4 Pole adapter that I ordered with it. Had to use an sharp blade to remove a lip on the bumper cover in order to make it fit and viewable under the tailgate. Decided not to tie in the backup lights, but all other features work perfectly. Packaging was a little shakey. Looks like both ends had to be retaped by UPS.
- RA960137
by: Douglas12/18/2021
Love the light strip, looks great on my oversize load sign.
- RA960137
by: Laurie11/25/2021
Have hubby light bar today for birthday, he's thrilled! Assured him install is easy, very happy.
- RA960137
by: Rich01/05/2019
Great product. Great company to buy fro m.
- RA960137
by: Greg A02/25/2014
Product was delivered fast and packed well , great service ,will use them again
- RA960137
by: Greg03/12/2021
- RA960134
Jim - 12/21/2021
by: Jim12/20/2020
Review from a similar SuperBrite in Tailgate Light Bar
Very nice, like that it is not really visible unless lights are on. It is possible to install without removing tailgate ! Did it today is less than an hour. There is a slight gap visible f try om top where piece overlaps a sheetmetal seam on each side, that is not even. To be safe, I applied clear silicone sealant on topside where these gaps are obvious. Also where tailgate harness passes thru middle opening, there was a slight gap to tape, so sealant was also applied in that area to prevent water seepage behind seal of lightbar unit.
Comments
Great performace, if I ever get another truck, I will install this new lightbar at rear
Jim - 12/21/2021
- RA960134
by: Steve F.09/07/2017
Review from a similar SuperBrite in Tailgate Light Bar
Installed the light bar on my mini camper for safety and visibility one year ago. It continues to function 100% and looks great. Very pleased with this and every purchase experience I have had with etrailer.
- RA960134
by: BIG GENE07/23/2014
Review from a similar SuperBrite in Tailgate Light Bar
Outstanding product for the price. Easy installation.
- RA960136
by: Bob D05/30/2014
Review from a similar SuperBrite in Tailgate Light Bar
Product is easy to install. I could not use the 4 prong adaptor that came with the bar and spliced the wires into my harness. Light bar is a good add on to my cargo trailer. Have used it a night yet but the LEDS seemed bright during the day.
- RA960136
by: Chris04/23/2015
Review from a similar SuperBrite in Tailgate Light Bar
Love the light bar. The reverse lights really help at night. After 2 weeks I never received. Etrailer made it right and sent me abother one, no questions asked.
- RA960134
by: Derril froese01/06/2015
Review from a similar SuperBrite in Tailgate Light Bar
Was easy to put on my 2013 Toyota Tundra looks good works great very good very bright do not know it under tail gate until you turn on lights stop or turn looks very nice
- RA960134
by: Gerry W04/12/2019
Review from a similar SuperBrite in Tailgate Light Bar
Installed Product
- RA960136
by: Curt02/02/2015
Review from a similar SuperBrite in Tailgate Light Bar
Light bar is well made, and was shipped in its PVC tube, so no worries of damage. Plugged right in and works great!!! Awesome customer service from e-trailer, shipped quick and let me know where my order was at every step of the process. Great all the way around.
- RA960136
by: Charles12/21/2017
Review from a similar SuperBrite in Tailgate Light Bar
Great service company.UPS broke the first package an when I let strainer know, the reshipped right away!!!! Saved a Christmas present for us. George and the staff are great, products as advertised and great quality.thanks ertrailer llll
- RA960135
by: John R.10/06/2014
Review from a similar SuperBrite in Tailgate Light Bar
I marked it excellent,assuming all is OK as it usually is with your products. This is going to be a Christmas gift so will not be opened at the present time,and also is being sent to another State. I do not expect any kind of problem with the tailgate light. thank you.
- RA960134
by: Jeff11/06/2020
Review from a similar SuperBrite in Tailgate Light Bar
I have purchased many items from trailer over the years...always professional with guidance on all questions with a prompt on time delivery.
- RA960136
by: Dale G.12/30/2017
Review from a similar SuperBrite in Tailgate Light Bar
I needed to replace these pads as my old fasteners had worn out.The new ones restore a new fresh look but I had a little difficulty with one of the end fasteners on each pad continually popping back up but with a little "coaxing" took care of that.
- RA960134
by: Jim j03/06/2018
Review from a similar SuperBrite in Tailgate Light Bar
I put tailgate lights on all my trucks. The last truck I switched to rampage brand and they were brighter and no lights burned out. So when I traded trucks there was no question to get the exact same one
- RA960134
by: Joe O12/07/2020
Review from a similar SuperBrite in Tailgate Light Bar
The lights were a Christmas gift. They were easy to install and work really well.
- RA769801
by: Gary-California10/15/2014
Review from a similar SuperBrite in Tailgate Light Bar
The light system was just what I was looking for. Not to sure about the strapping thou, but I will make it work. Thank You for this product.
- RA960134
by: Dorothy08/22/2018
Review from a similar SuperBrite in Tailgate Light Bar
The light arrived as scheduled. No problem installing, took 30 minutes to install and working. It works great, am very happy. I would order from company again, was surprised to receive email letting me know package was delivered same night as delivery.
- RA960134
by: Greg07/01/2018
Review from a similar SuperBrite in Tailgate Light Bar
Great taillight led bar! Packaged well and easy install! Well worth it! Thanks!
- RA960134
by: Phoenicia02/16/2018
Review from a similar SuperBrite in Tailgate Light Bar
Awesome gift for my fiance' who is a hot shot driver. This product came in just two days !!! I got an affordable price on this great product. This is one of two products I ordered. I will be using this site again!!!!
- RA960134
by: Dominic12/15/2017
Review from a similar SuperBrite in Tailgate Light Bar
T connector fit perfect. Love the light bar !
25
53
Show More Reviews
Ask the Experts about this Rampage Tailgate Light Bar
- Installing the Rampage Light bar on a 2020 Ram 1500The Rampage # RA960137 Tailgate Light Bar you referenced is NOT a fit for your 2020 Ram 1500. However, the Rampage # RA960134 IS a confirmed fit for your Ram. The light bar plugs into your 4-pole trailer lighting connector. If your truck does not have this connector you can install the Hopkins # 41155 Simple Wiring Harness. I have included links to these product pages and a review video.
view full answer... - Troubleshooting Rampage SuperBrite LED Tailgate Light Bar Left Brake LightI took a look at the instruction manual and in order to troubleshoot what the issue is with the Rampage SuperBrite LED Tailgate Light Bar # RA960137, "If you have issues with the functions of the bar check the 1 amp fuse in the ground line. You can use a 9 volt battery to test power off of the vehicle. Connect the battery (-) to the ground on the four prong, and the other (+) to each of the three connectors on the four prong, one at a time. This will ensure functionality of the bar." It...
view full answer...
- Will Rampage SuperBrite LED Tailgate Light Bar Function When 2016 Chevy Colorado is Flat TowedSince your 2016 Chevy Colorado comes with factory trailer connectors the Rampage SuperBrite LED Tailgate Light Bar # RA960137 won't function when your pickup is being flat towed. Reason being that the Roadmaster diode kits like part # RM-15267 splice in to the tail light functions while the factory trailer wiring is its own circuit. If you wanted to have the light bar functioning while you are flat towing then you would need to install a separate 4-Way connector that is linked to the...
view full answer... - Rampage LED Tailgate Light Bar Installation on 1998 Toyota Tacoma SR5The Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long # RA960137 will use the functions from both the right and left side of the truck. I recommend using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118379 which will allow you to simply connect the light bar without any splicing required. If you want to hardwire the light bar, you will want to double check with a circuit tester like # PTW2993 but I believe the white...
view full answer...
- Troubleshooting Rampage SuperBrite LED Light that Both Blinkers Light Up Both SidesThe Rampage SuperBrite LED Tailgate Light Bar # RA960137 that you referenced uses a standard trailer 4-way connector to install. You'd want to test the pins of your son's Frontier 4-way to make sure it's wired properly. Using a circuit tester like # PTW2993 test for voltage on the pin next to the jacketed pin (should be white wire) for voltage when running lights are on, next check the one next to it for blinking voltage when left turn signal is put on and see if the next pin also comes...
view full answer... - How to Install the Rampage LED Tailgate Light Bar Part # RA960137 On a 2017 Toyota TundraThe Rampage SuperBrite LED Tailgate Light Bar part # RA960137 is very simple to install and will only require one hardwire connection. I have attached the installation instructions for you below but to summarize, you will first want to plug the 4-way trailer connector on the light bar into the 4-way trailer connector on the vehicle. If you don't already have a 4-way trailer connector you can use part # HM11141835. I also highly recommend using a bit of part # 11755 before mating the two...
view full answer... - Can the Rampage SuperBrite LED Tailgate Light Bar Be Hardwired
Great news the Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long part # RA960137 can in fact be hardwired directly to your trucks trailer wiring. This is a very common practice among a lot of customers I work with. Yo will simply get the signals from behind your bumper and splice the wires in using Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5 part # DW05745-5. These heat shrink connectors will allow you...
view full answer... - Installation Instructions for Rampage LED Tailgate Light Bar # RA960137I've linked you to the installation instruction for the Rampage LED Tailgate Light Bar. The light bar features a 4-pole flat trailer connector that would plug into the existing 4 pole trailer connector on the vehicle. The wiring harness has an extras wire on it that would tap into the reverse light circuit on the vehicle. If your vehicle doesn't have a 4-pole trailer connector, you could remove the 4-pole connector and wire the light bar directly into your taillight circuits. The procedure...
view full answer... - Hardwiring Rampage SuperBrite LED Tailgate Light Bar RA960137 on 2014 SilveradoIf you want to do a hardwire install for your Rampage SuperBrite LED Tailgate Light Bar # RA960137 rather than use the 4-pole flat trailer connector you'll want to use a tester like # 40376 to test the truck's wires. This is the only sure way to know which wire carries which lighting function. You'll need a helper in the truck to activate each lighting function while you apply the tester to the wires. Be certain to have your helper apply the brake and parking brake to ensure your safety...
view full answer... - Wiring Tailgate Light Strip to 2015 GMC CanyonI understand your winter weather concerns; I attended college at SUNY Oswego (situated on the shore of Lake Ontario) way back when and I can STILL remember how well wind-driven "lake effect" snow can find its way into the sleeves and collar of even the best winter coat. I get it. The light strip I suggest for your GMC Canyon is Pilot's Bully Fire Strip LED Light # BLS-1103 because it has a standard 4-pole flat type connector that will avoid the need to use any adapters. It simply plugs...
view full answer... - Troubleshooting Rampage SuperBrite LED Tailgate Light Bar RA960137 That Stays LitLED-type lights like the Rampage SuperBrite LED Tailgate Light Bar # RA960137 are so electrically efficient that sometimes they will illuminate even when the vehicle wiring harness does not have any lighting functions activated. 4-pole wiring harnesses can sometimes pass enough residual power (even with no function activated) to cause LEDs to operate. This is not a malfunction, just a side-effect of the LED's high efficiency. However, since you mention that your light does not blink...
view full answer... - Can Rampage SuperBrite LED Tailgate Light Bar # RA960137 be Hardwired Into a 2015 Ram 1500The Rampage SuperBrite LED Tailgate Light Bar # RA960137 plugs into a 4-Way flat vehicle side connector. If your 2015 Ram 1500 does not have any kind of trailer connector you could either add one using # 119190KIT or you would have to cut off the 4-Way plug on the light bar and wire its wires directly to the tail light wiring on your truck. To hardwire it to your truck you will first need to test the tail light wiring behind the truck's tail lights using a circuit tester such as # 40376....
view full answer... - Recommended Tailgate LED Light Bar For 2012 Nissan FrontierFor your 2012 Nissan Frontier with 59-5/8 inch tail gate, I recommend using the Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long, # RA960137. This will allow you to use all the functions you want. I highly recommend hardwiring this to the wires just before your 7 way connector to still give you your trailer connection. You can tap into the running lights, turn signals, brake lights and reverse light functions right there without running extra...
view full answer...
- What are the Wire Functions on the 4-Way of the Rampage SuperBrite LED Tailgate Light Bar by ColorThe white wire is the ground circuit, the brown is the taillight circuit, the yellow is the left turn/stop light circuit and the green is right turn/stop light circuit.
view full answer... - How to Wire Up the Rampage SuperBrite LED Tailgate Light Bar # RA960137 to Reverse Light CircuitWhat you will need to do is find the wiring harness that runs to your 1995 GMC Sierra's taillights and then using a circuit tester like part # PTW2993 test all of those wires till you find one that has voltage when the vehicle is put in reverse. Once you find the correct wire you will then attach the white wire of the # RA960137 to it using a quick splice connector like part # SWC501746-1 and the light will activate properly when put in reverse.
view full answer... - Would Rampage SuperBrite LED Tailgate Light Bar # RA960137 Fit 2017 Ram With Back Up CameraThe Rampage SuperBrite LED Tailgate Light Bar # RA960137 doesn't have a specific fit list but as long as you have room for it under your tailgate and above your bumper it would fit and work well. It would pretty easily just plug into a trailer 4-way connector like what you truck has so no splicing would be needed. The rear camera on your truck is in the tailgate handle so it wouldn't be an issue at all.
view full answer... - Troubleshooting Rampage SuperBrite LED Tailgate Light Bar # RA960137, Not BrightIf installed properly there is no way to make the Rampage SuperBrite LED Tailgate Light Bar # RA960137 any brighter. What you can do is make sure the pins of the 4-way that you used to install this with are clean and free of corrosion as a weak ground could potentially cause the assembly to not be as bright as it should be.
view full answer... - How Does Rampage SuperBrite LED Tailgate Light Bar # RA960137 InstallOnline instructions for the Rampage SuperBrite LED Tailgate Light Bar # RA960137 aren't available but I can walk you through the install process. Basically you just plug the 4-way trailer style connector of the light into the 4-way of your truck after peeling back the adhesive backing on the lightbar and pressing it to the gap between the rear bumper and the truck's tailgate and you're set. You'll want to make sure your vehicle is clean where you will be installing the light bar as well.
view full answer... - How to Install the Rampage SuperBrite LED Tailgate Light Bar Part # RA960137The Rampage SuperBrite LED Tailgate Light Bar part # RA960137 can be installed in pretty much any weather that your fingers can still function in. There is not a maximum or minimum temperature range for installation of this product. All you really need to do to install the light would be first clean the surface you are attaching it to and then carefully take the tape off the back of the adhesive while aligning it between the opening of your tailgate and bumper. Once the light is in place...
view full answer... - How to Find Left Turn Circuit Wire on Tail Lights of 2016 Ford F-150I can help you determine which wire you'll need to use but I can't tell you exactly which wire it will be without testing first. You'll need to use a circuit tester like part # PTW2993 to test the wiring of the taillight assemblies and the one that has voltage when the correct signal is applied is the wire to use.
view full answer... - Does Adhesive of Rampage SuperBrite LED Tailgate Light Bar # RA960137 Hurt Clear CoatThe 3M adhesive that the Rampage SuperBrite LED Tailgate Light Bar # RA960137 uses to secure to the rear of a vehicle is safe on clear coat. Removing it later would not cause any issues with the paint.
view full answer...
- Recommended 4-Way Trailer Connector for Truck Bed Light Strip Behind BumperFor your 2017 Ram 2500 you will use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 for your light strip like # RA960137. This will give you the 4 way connection behind the bumper and still give you the trailer connector at your bumper for trailer use.
view full answer... - Rampage SuperBrite LED Tailgate Light Bar 2017 Ford ExplorerI am not sure what you mean by "triple light" but the Rampage SuperBrite LED Tailgate Light Bar part # RA960134 has stop, turn, and tail light indicators. It attaches to the vehicle using a 3M automotive-grade adhesive tape and plugs into a 4-way trailer connector. If you need a 4-way trailer connector to plug the light strip into, then you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118540 for this purpose. The Rampage SuperBrite LED Tailgate Light...
view full answer... - Dash Lights Appear While Using The Factory 4-Flat Connector On 2014+ Ford F-150We have had this problem before on similar products due to the computer system used in the newer Ford trucks. Whenever an accessory is plugged in, the vehicle may think there is a trailer connected and responds accordingly. The only way around this is to hardwire the Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse part # RA960137 into the tail light harness. This however, can be accomplished rather easily as you will only need to use a circuit tester like part #...
view full answer... - Third Brake Lightbar Strip Recommendation for a 2010 GMC CanyonYou would need to go with a shorter tailgate lightbar strip since your 2010 GMC Canyon is a midsize truck. The 60 inch part # RA960134 that you referenced would be too long. Instead you would want the part # RA960137 which is 49 inches long and would fit perfectly.
view full answer...
Do you have a question about this Tailgate Light Bar?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality tailgate light bar for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate tailgate light bar information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Leah B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Erin H
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.