If you’re looking for one light that does it all, this round Fusion LED trailer tail light covers every base—stop, tail, turn, and backup—all from a single 4" face. It uses 24 diodes to put out bright, even light across its smooth red and clear lenses. The outer band glows for tail light mode and brightens for brakes, while the inner section handles turn and reverse functions. The GloLight ring gives it a solid, clean look instead of visible points of light. With 12.8V power draw ratings of just 0.316 amps for stop/turn, 0.15 amps for tail, and 0.3 amps for backup, it’s efficient and dependable without any bulbs to replace.
You don’t have to baby this light if your trailer sees water. The housing and lens are sonically sealed into a single waterproof unit that’s fully submersible. That seal keeps moisture out so the LEDs and circuit board stay protected even after repeated dunking. The durable polycarbonate lens and housing hold up to road spray, rain, or full submersion—ideal for trailers used around ramps or wet conditions.
Nothing kills lights faster than bad wiring connections. This setup uses two separate weathertight plugs—one for the main tail light functions and another for the backup light—to keep moisture from creeping in. They pair with the industry-standard 2-prong (A42PMB) and 3-prong (A45PMB) plugs, sold separately, so you get a solid connection that stays dry and secure.
The recessed mount with built-in black flange gives a clean finish once installed. It fits into a 4-1/2" cutout with an overall flange diameter of 5-1/2". From the front face to where the wiring enters the plugs, you’ll need about 2-1/2" of depth clearance for comfortable wiring space. Mounting holes are spaced at 4-1/4" centers. Once in place, it sits flush and looks sharp while keeping everything protected behind the flange.
Inside, surface-mount technology (SMT) keeps each LED firmly in place to resist shock and vibration. That means steadier performance on rough roads and better heat handling over time. With LEDs rated to last up to 50 times longer than bulbs and backed by a lifetime LED warranty, this is one of those installs you can do once and trust for years of bright, consistent lighting.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
I like the looks of them! I hope they last!
The original led tail lights have been replaced twice in 6 years. That’s unexceptable!
Great product, came as described.
great product
Great fit, excellent delivery time.
Nice i like it, good products , excellent parts!!
Very bright. Perfect fit.
excellent product, installed them in my jeep TJ , love em..
sorry no pics.
Great looking light, on and off! Unfortunately they didn’t work on my 5th Rv , so I am looking for some thing to put them on!!!
Lights are great, easy to install but should have come with the two pigtail wire leads.
Exactly what I ordered is what showed up. Good price as well. This was a harder to find part. Showed up a day later than should have but, USPS is what it is. Could have opted for more expensive shipping. Overall, very satisfied!
Installed on flat bed for truck. Plugs fit tight less chance of vibrating loose
PROS Nice Bright light. All Functions work well. CONS, would be nice if it came with a mounting gasket & the wiring weather tight plug-in pigtail needed to complete the wiring. Love the LED brightness just wish it came more complete ...plug & play.
I love the lights and the website so far but it bugs me that the lights didn't come with the plug pigtails. You shout raise the price of the light by whatever the cost would be for 1 and throw the other in for free or just throw them in for free . It's really nice to have them as a kit. Kits are key.
I love the products but the quality of the packaging was horrendous. When I opens the box up there wasn’t enough packing paper in the box to keep the lights from shifting in the box. Most of the lights were out of the low quality unsealed plastic bags and were a scratched and marked up. Along with that there weren’t any bags for the smaller 3/4”lights and were loosely thrown in the bottom of the box with the grommets not being attached in any way. After I pulled the contents out of the box I realized that there weren’t even enough crappy plastic unsealed bags for all of the main 4”and 6” S/T/T/B lights and to finish it off all the electric grease that was in the plugs was not covered in any way leaving all the bags and contents of the box completely covered in di-electric grease. Overall after cleaning all the lights up the products are amazing except for it took a little research to find out that the 4” STTB lights aren’t supplied with pigtails. I’m disappointed of the quality control for your company for the price that you ask.
Lights were exactly what I wanted very bright and great quality shipping was way faster than expected
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.