White Dome Assembly for standard roof ventadomes (metal mounting flange). NEW Wedge shape
(336 reviews)
Price: $30.03
White Dome Assembly for standard roof ventadomes (metal mounting flange). NEW Wedge shape
Retail:$32.83
Our Price: $30.03
You Save: 9%
Orders above $99 qualify for Free Shipping
In-stock alternatives that can ship today
- All Info
- Reviews (336)
- Q & A (145)
- Videos (3)
- Photos
- Why etrailer?
Ventline RV Vents and Fans
- Roof Vent
- Replacement Lid
- 14W x 14L Inch
- White
- Ventline
- Continuous Hinge
Replaces the white, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.
Features:
- Replaces the wedge-shaped, polypropylene lid on Ventadome roof vents for motor homes and enclosed trailers
- Works with Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008
- White color
- Made in the USA
BVD0449-A01 Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic
Item # BVD0449-A01
Video of White Dome Assembly for standard roof ventadomes (metal mounting flange). NEW Wedge shape
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ventline Ventadome Replacement Vent Installation
Today we're going to be taking a look at the Ventline Replacement Dome Assembly in white, part number BVD0449-A01. It's also available in smoke, part number BVD0449-A03. This is going to be a direct replacement for the lid on your model number V2092, V2094, V2119 and V2128, Ventadome Roof Vents. It has the same web shape and it's made out of the same polypropylene material. Over time your lid may crack, break or fade. We're going to show you how to replace it. Now of course this will be in your RV, but for demonstration purposes, we're going to show you right here.
We'll flip it over and this will be as if we we're looking up. First thing we want to do is go ahead and remove the screen. We've got these little tabs surrounding it. We can actually just push those out and begin taking it off. All you're going to need for this job is a Phillips-Head screwdriver. Let's go ahead and take off the knob.
Once we get that screw loose, we can actually just pull up on the knob just like that and set it aside. For our tray here, we just need to push in on each side inward. We've got some teeth that we need to get around, but then it should just pop right on out. You can see the two teeth here. Then we've got our switch. If you'd like you can disconnect it, we're going to leave ours attached.
The other two wires here will be connected to your power in your RV. Then we can grab our Phillips-Head screwdriver again and we're going to remove our arm assembly. Now we'll need to take these screws all the way out. With those loose, it's going to allow us to remove our arm from our lid. We can just slide it off like so and just kind of leave it set there. Then it's going to allow us to remove our lid from our vent assembly. Now this portion will be on top of your RV.
You can actually lift up on the non hinged end of the lid all the way up and then take it off. We can grab our new one. We'll locate the hinge side, go ahead and turn it over, line it up and then turn it over like so. Now we can go back inside of our RV. Back here on the inside we can reconnect our arm assembly. We'll just need to slide this on to the portion right here just like that and then position it over our holes. I've gone ahead and reinstalled my other components. Let's go ahead and test it out. I'd say it's working pretty good. That's going to complete our look at the Ventline Replacement Dome Assembly.
Customer Reviews
White Dome Assembly for standard roof ventadomes (metal mounting flange). NEW Wedge shape - BVD0449-A01
Average Customer Rating: 4.8 out of 5 stars (336 Customer Reviews)
Replaces the white, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.
- BVD0449-A01
by: Bobby07/28/2018
"Universal vents" don't always work. I ordered one by mistake from that giant online storehouse—realized I needed this specific model and it was not offered there. Etrailer had what I needed and also had the dome seal (BVD0455-01), which I also needed. Products were exactly as advertised and with the installation videos (also on etrailer) for the EXACT model ordered, installation was simple. Before and after pics included in this review (previous vent was damaged in a recent hail storm).
- BVD0449-A01
by: Tim06/07/2021
After a hailstorm cracked our original vent dome, which was 10 years old. I didn’t think that I’d find a direct replacement. I searched with the original part number and found this one. Fit like a glove and was very easy to install. I’ve made a few purchases from etrailer, and not been disappointed. Thanks
- BVD0449-A01
leo a - 04/12/2021
by: Leo04/11/2020
received it today waiting for two other item from etrailer related to the vent cover assembly.when they are received hopefully I can get everything installed if mother nature will give us some good weather.
Comments
looks great and works well happy camper
leo a - 04/12/2021
- BVD0449-A01
by: Richard08/07/2021
Couldn't ask for better service ordered the part,3 days later it was @ my door step!! I Will be using them for all my trailer needs!!!
- BVD0449-A01
James - 10/15/2020
by: James10/14/2019
My order was shipped very quickly, the new part fit perfectly and I would consider this an A+ transaction. I would definitely recommend etrailer for your camper equipment needs!
Comments
It’s been a year and my roof dome is still working perfectly. It seals tight and hasn’t had any leak issues.
James - 10/15/2020
- BVD0449-A01
by: Vern05/24/2021
My original vent cap was damaged in a hail storm. This item was easy to install and has been keeping my trailer dry for the past year.
- BVD0449-A01
Erin - 04/03/2021
by: Erin04/02/2020
Excited about getting these new ones on our 5th wheel for this year.
Comments
We are really happy with the new vents.
Erin - 04/03/2021
- BVD0449-A01
by: Lawrence05/27/2021
I needed a replacement vent cover which you had in stock, shipped quickly and was an exact fit and installed in 15 minutes.
- BVD0449-A01
by: Steve03/11/2021
Nice to have a new vent cover. However, if your old vent has become brittle it is likely that all the plastic parts especially the screen are also brittle and may break as you replace the cover. The cover could be sold with all the parts or the sales description should suggest that you buy all the parts that deteriorate from sun and age. The video helps a lot in doing the replacement.
- BVD0449-A01
by: David12/12/2020
I entered my camper info in the search feature and it was there. Found the roof vent covers that said it fit. I ordered and they got here within a 4 days excluding weekend. Free shipping was nice. I opened the box and saw the tag that there were 4 different covers. I thought for sure I got the wrong one I mean what are my chances.. Nope it was 100% correct. I know parts can funny for these campers. Awesome job Thanks guys/gals
- BVD0449-A01
by: John03/04/2021
Works as good as the original! Had to replace on a cargo trailer after a tree limb fell through it during a storm. After having it on for a year, it doesn't have any sun fade, and still holds tight.
- BVD0449-A01
by: Chris12/07/2020
I cracked my OEM dome while shoveling snow off our trailer. This was a quick and easy install. Heck it took me longer to climb the ladder! If you are thinking about replacing your domes don't delay, it is easy!
- BVD0449-A01
by: TJ08/26/2021
I can't believe you had this part for my 15 yo trailer. Price was right and shipped super fast! Great job etrailer!
- BVD0449-A01
Randy B - 06/19/2021
by: Randy J06/18/2020
Product works great. Came faster than expected and fit like it was supposed to.
Comments
Great. Works like a champ.
Randy B - 06/19/2021
- BVD0449-A01
by: Robert04/10/2021
Over the years I have dealt with etrailer and was never disappointed.
- BVD0449-A01
by: Matthew03/15/2021
I ordered on a Friday 2nd day air.. Was not expecting such a quick delivery! Showed up on Monday morning. Email notification was updated with time stamped updates between order received, picked, shipped and tracking info when available. Very smooth and impressive experience. Highly recommend!
- BVD0449-A01
by: Donna R07/29/2017
The Ventline Ventadome trailer roof vent covers fit the fifth wheel I purchased them for perfectly! They held up with three major storms we had back to back this past winter, they didn't leak, or blow off! They are opaque but allow a lot of light to shine through. I recommend them highly, and etrailer.com, as well. They were very helpful, attentive, and my order was delivered quickly! They went out of their way, and above and beyond my expectations. They really care about their customers and their needs. There prices are very reasonable, too. All in all, a win-win for me!
- BVD0449-A01
by: Dottie08/22/2021
Very easy to use website. Product arrived quickly as promised.
- BVD0449-A01
by: Dave07/05/2021
So far so good! We will see how long it lasts in the Arizona sun.
- BVD0449-A01
by: Steve01/16/2018
Had 3 on my (new to me) 2011 Forest River Cherokee Wolf Pack 27DFWP that had seen better days. So, I ordered 3 after reviewing the installation video. The video was 'close enough' that I could manage. (My setup had a locking clamp in the center of the hinge area.) 'Twas no worries. Not sure how this is going to turn out, but I pre-treated the inside & outside of the vents with clear Flex-Seal to protect and maybe ease some of the tension requirements of a vent on a rolling trailer. We'll see.... But this vent itself is well constructed, fit fine, and the reason I ordered from eTrailer was the video & support. I'm new to this RV thing and those videos, reviews, and other documentation are just gems.
- BVD0449-A01
by: David05/07/2021
What can I say, it’s a vent cover!!
- BVD0449-A01
Clarence - 03/19/2020
by: Clarence03/18/2019
I received the order promptly and it appears to be the proper one. I have not installed it yet but I feel sure it is correct. The product and shipping was great. Thanks.
Comments
Difficult to install due to having to get on top of the trailer. Once installed it works great. Lots of rain here and no leaks.
Clarence - 03/19/2020
- BVD0449-A01
by: Kevin L.05/15/2012
Although I am not happy about having to replace the original vent covers on my motorhome after only three years of service due to UV damage that made them brittle (they literally crumbled in place), the replacement covers I purchased from etrailer.com were very easy to install according to the instructions provided on the packaging. Until I know how the new covers will weather over time I am giving this prouduct a "Good" rating based solely on ease of installation. I am also very happy with the service and quick delivery I received from etrailer.com.
- BVD0449-A01
by: Deano04/12/2020
Great fit I’ve shopped locally for at propane gas line that has a quick disconnect on my RV. I wanted to eliminate the use of a external propane tank. Emily worked with me on my product needed located she shipped it out and we are happy we can grill outside the RV with our potable grill. Great Job Emily!...
- BVD0449-A01
by: Grant05/03/2019
Just a quick word about this vent cover. Mostly I had to figure out which one was right for the trailer by looking at the picture of the hinge because the rest of it had blown off. Wasn't that easy but these folks had the first decent pic that made me confident it was the right one. That was after going to the place we bought the trailer 7 years ago . All they sold was a couple generic ones that weren't even close. Trailers is just a side thing I guess, mostly they sell seed, ranch supplies. The Trailer is a 2012 Continental Cargo. These people got it shipped quick and it seemed like a fair price to me.
27
339
Show More Reviews
Ask the Experts about this Ventline RV Vents and Fans
- Replacement Cover for Trailer Roof Vent AS-13 M-VD0449We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part # BVD0449-A03 in Smoke or # BVD0449-A01 in White. The cover measures 14 inches x 14 inches and is designed for a continuous hinge. I have attached a couple short video reviews on these covers that you can check out as well.
view full answer... - How to Determine Correct Replacement Lid for Trailer VentI can tell you how to determine the correct replacement lid for your trailer vent, though a trailer's VIN doesn't have any information regarding the vent, and replacement parts are not something almost any trailer manufacturer has because they are widely pieced together. The best option - if you can't find the part number of the vent to try and match a replacement to that - is for you is to refer to the accompanying photo I added, you can see that there are four types of hinges and what...
view full answer...![Image 1 for]()
- Replacement Vent Cover For 16 Foot Wells Cargo TrailerIt looks like you have a standard 14-1/4 by 14-1/4 trailer roof vent but you would want to measure to be sure. The second step is to look at the hinge portion of your cover. It looks like you may have a metal continuous hinge but I have added examples for you to be sure. I recommend Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for a metal continuous hinge. I have added an installation video for your reference.
view full answer...![Image 1 for]()
![Image 2 for]()
![Image 3 for]()
- Pace American Model JT714TA2 Vent Lid ReplacementIs there any way you could get me a picture of the top of the lid? Your picture is hard to identify since several look like that from the bottom. But with a picture of the top I know we'd be able to find what you are in need of.
view full answer...![Image 1 for]()
- Pace American Model JT714TA2 Side Door Latch Replacement and Light SwitchI looked up pictures of your Pace American Model JT714TA2 trailer and it appears the trailer uses a standard side door latch commonly found on trailers. So since you lost your key the easiest option would be to replace what you have with the Global Link RV Door Latch Kit # 295-000019. For an easy interior lighting switch we have the On/Off Push Button Switch for RV Lighting # DG52452VP which easily installs and allows you to turn the lighting off and on with just the push of a button.
view full answer... - Which Dome Seal Fits Vent Cover for Ventline Old Style Rounded Dome Lid BC0554-01?The correct dome seal for the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 you mentioned is the Replacement Dome Seal for Ventline Ventadome Trailer Roof Vents # BVD0455-01. This will make sure you get a water tight seal. I included videos of the products mentioned for you to take a look at.
view full answer... - Replacement Dome Lid for Ventline Roof Vent With Part VD0434The part number you have found on the screen (VD0434) is for the actual screen not the vent model number per se. That said, this screen is for the Ventline Ventadome Trailer Roof Vents so if this is what you have then you can use the Replacement Dome for Ventline Ventadome Trailer Roof Vent part # BVD0449-A01. The model number for the vent assembly can be found under the screen.
view full answer... - Replacement Vent Cover For Ventline AS-13-M-V101I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is # BV0554-01 in white or # BV0554-03 in smoke. I've attached video reviews of each of these as well as an installation video to assist. Part # BVD0449-A01 you mentioned is not a fit for your application.
view full answer... - Finding a Replacement Trailer/RV Roof Vent Cover on a 2007 OutbackYou will need to go by the hinge design of your vent assembly to determine the proper replacement. I have included a picture that shows the different types. If you can tell me which matches or if you can send me a picture of the hinge on the vent assembly I can make some recommendations for you.
view full answer...![Image 1 for]()
- Vent Cover Recommendation for Ventline Roof Part # VD0433Based on the number you listed the cover you are looking for is the part # BVD0449-A01 for a white cover or the part # BVD0449-A03 for a smoked color.
view full answer... - Replacement Vent Cover for 2008 Kiefer Built Horse TrailerI wasn't able to find any information that says what kind of vent was originally on your 2008 Kiefer Built horse trailer, but I can show you how to find the correct replacement. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as...
view full answer...![Image 1 for]()
- Replacement Roof Vent Cover for Philips V2100 Trailer Roof VentVentline offers a wide assortment of trailer vent replacement parts for both their own Ventline-branded products as well as many others' OEM parts. We do not offer any Phillips-brand vent parts but there is a strong chance that you'll be able to find a Ventline item that will work for you. You can use the link provided to view our main page for trailer vent covers; these are offered in various materials and colors. The main factor to consider is the type of hinge on your vent. Our...
view full answer... - Does Interior Trim Panel or Garnish of Trailer Roof Vent Need Removing to Install Replacement CoverI believe you're speaking of the garnish or inside trim, which will need removing to install a replacement lid. I've linked you to a help article that shows how to replace a vent lid or cover. I've also linked to a couple of installation videos that will walk you through the whole process.
view full answer... - Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
view full answer...![Image 1 for]()
- Locating Replacement Bathroom Vent Cover on 2014 Puma 23FB TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
view full answer...![Image 1 for]()
- How to Determine Correct Vent Cover or Replacement Lid for Cargo TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
view full answer...![Image 1 for]()
- How to Find the Right Replacement Vent Lid for a Horton Hauler Enclosed TrailerIf your vent has a model number at all it would likely be on the inside on a sticker. The old cover may have the information molded into it. Otherwise you will need to go by the size and the hinge style. I have included a picture showing the various hinge styles to make it easier.
view full answer...![Image 1 for]()
- Replacement Lid for Ventline Trailer Roof VentWe carry replacement lids for trailer roof vents along with covers and other parts, and we offer complete vent units too. All of these item types can be seen on the linked page. If you need only a replacement lid simply click on that image at the top of the page. Almost all square trailer roof vents are the standard 14 x 14-inch size and we have lids in many colors for each of the four different types of vent hinge in common use. Please refer to the photo I linked for you that shows...
view full answer...![Image 1 for]()
- Vent Cover Replacement for Ventline Ventadome model V2094I'm happy to point you in the right direction. However, parts like replacement roof vent covers are not trailer specific, so you'll either need: a) The vent model number (found on the inside of the metal frame). OR b) The dimensions and style of hinge (see attached photo). For example, if you have a Ventline Ventadome model V2094, the correct replacement lid is # BVD0449-A01, which uses a continuous hinge and fits a standard 14-1/4 W x 14-1/4 L inch rough roof opening.
view full answer...![Image 1 for]()
![Image 2 for]()
- Replacement Roof Vent Lid for 2009 U.S. Cargo Utility TrailerThank you for the photo of your roof vent hinge on your 2009 U.S. Cargo utility trailer. Your photo indicates that you have an older style hinge on your roof vent. We do not have replacement lids in this style but we can offer you a replacement vent assembly. The linked page will show you all complete 14 x 14-inch vents, including ones with fans. You can just click on the type and color you prefer. You'll need an installation kit to install the new vent; since it appears you have...
view full answer...![Image 1 for]()
- Replacement Ventline vdo449a Roof Vent ClipI checked with Ventline and they longer provide the Replacement Spring Clip for Ventline Ventadome # VD0453-00vd0453-00 spring clip and we no longer sell them either. That said a full replacement lid like the Replacement Dome for Ventline Ventadome Trailer Roof Vent # BVD0449-A01 or a vent like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 are also options available instead.
view full answer... - Replacement Roof Vent Cover for 2000 Skamper Sport 23D Pop-Up Camper TrailerThank you for the photo of your trailer roof vent for which you need a new lid. I conferred with several of my associates regarding the photo of your trailer roof vent which requires a replacement lid. Interestingly, this hinge design seems about halfway between a 3-point type like # 69284 and a continuous type like # BV0554-01. After much back and forth we came to the determination that you need a 3-point. We have only one 3-point-hinge type lid # CAM40153. But we do have a...
view full answer...![Image 1 for]()
- Replacement Roof Vent Cover Lid for Pace American TrailerLooks like you need a continuous hinge roof vent lid like the part # BV0554-01 based on what I can see in your picture can compared to the install pictures we have of this cover.
view full answer...![Image 1 for]()
- MaxxAir Rain Cover Compatibility with Ventline # V-2094 For your Ventline Ventadome, you will want the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent # BVD0449-A01 or # BVD0449-A03 which is confirmed to fit your Ventline model. If you are looking for a rain cover compatible with this vent, I recommend the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066. This will give you the mounting hardware and cover to allow use of your vent in less ideal weather. Since you don't have the factory mounting locations,...
view full answer... - Replacement Roof Vent Lid for Atlas TrailerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown...
view full answer...![Image 1 for]()
- Are Roof Vent Covers All The Same Size and How to Choose ReplacementSo to answer your question about the vent size, they are not all 13-1/4" x 13-1/4" as the sizes can vary somewhat. The part 69284 you mentioned has been discontinued, but apart from that most replacement roof vent lids are 14" x 14" or very close in order to fit on top of the vent. The industry standard for roof vents is 14" x 14", and that is likely what you have, though if you aren't sure of the model of your vent, to determine the right replacement is to a look at the hinge and find...
view full answer...![Image 1 for]()
- Replacement Roof Vent Lid for Enclosed Cargo TrailerTo determine which cover you need, examine the existing vent cover (or what is left of it) for a manufacturer name or model number. Take a look at the replacement covers we offer (see provided link) paying close attention to the thumbnail photos showing the hinge configuration. You will need to choose the cover whose size and hinge configuration matches your existing vent. If you are unsure, please email me a photo of your existing vent, making sure to get the hinge in the photo. Having...
view full answer...![]()
Do you have a question about this RV Vents and Fan?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality rv vents and fans for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv vents and fan information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Written by:
Raymond P
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Mary E
Updated by:
Wilson B
Updated by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.