Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-5/8" x 1-1/4". Weatherproof, LED trailer light serves as a side marker light or a clearance light. Unique dragon's eye design with amber LEDs. Surface mount - hardware not included. 1-Wire design.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at and showing you how to install the Dragon's Eye LED Clearance or Side Marker Light.Now this is what the light's going to look like when it's turned on. As you can see, the two diodes put off more than enough light. I really like it because it's LED, which means you're not gonna have to worry about any brittle filaments breaking like your traditional style incandescent lights, and it's gonna use less power to put off a brighter light.Another reason I like this light is because how compact it is. It's going to measure only 2-5/8" long, 1-1/4" tall. From bolt hole to bolt hole, it's going to measure 1-15/16" and it's going to be 3/4" deep.The light is DOT compliant. It is a great upgrade from an incandescent light, because the LEDs last a lot longer.
It also has a weather proof housing to help resist any water damage.And this is what the back of the light looks like. As you can see, we have one wire coming out, this'll be our power wire. And we have a built in ground strap that will get grounded from our mounting hardware. Now this is a really neat feature, because it eliminates the need for another wire coming out of the back of the light.And I'll show you how easy it is to install this light. Now depending on your application, you may have to drill a few holes for your hardware, and one for your wire to pass through.
And it's a good idea to drill the center hole a little bit bigger, that way your wire doesn't get hung up on it. Now it'll do that because this center portion here is the same height as the outside part of the light, and if your hole happens to be small and off-center, when you run your wire through, it could pinch your wire like that. So we're gonna avoid that.Once you have that done, feed it through, and push your light flat up against your trailer's frame. Alright, now we're gonna secure the light using some Number 8 Self-Tapping Tek Screws. Let's get both of 'em started, and use our wrench to tighten 'em down.
And you wanna be careful not to over tighten these, 'cause you don't wanna crack the lens. So just run 'em down until they stop, and they're nice and snug.Alright now all we have to do is connect our trailer's power wire to the light's power wire. We're gonna do that using a Heat Shrink Butt Connector, which you can find on etrailer.com. We'll place it over the light power wire, crimp it down. And do the same thing to the trailer's power wire, and you can use a heat source to shrink our heat shrink.Now with everything connected, go ahead and test it to make sure everything works.
Once we do that, we can use some zip ties and secure our wiring up out of the way to help keep it protected. If you have more than one light, just go ahead and repeat that same process to get the rest of 'em installed.And that'll do it for our look at, and installation of the Dragon's Eye LED Clearance or Side Marker Light.
Average Customer Rating: 4.7 out of 5 stars (52 Customer Reviews)
2-5/8" x 1-1/4". Weatherproof, LED trailer light serves as a side marker light or a clearance light. Unique dragon's eye design with amber LEDs. Surface mount - hardware not included. 1-Wire design.Perfect replacement!
Perfect match to the ones on our trailer, thanks
Quick shipping, good products
The customer service at etrailer is above and beyond any other company! Issues are always addressed and resolved. I will always do business with them since they help with ordering if needed and are there should you need post sale assistance.
Great customer service arrived ahead of schedule. Finally a company with Good customer service. You've got My Business. However I'd like a catlog Thank You.
Easy to install and has been working gr eat!
Always great service and delivery !!!
Exact replacement for my toy hauler. Will buy more.
Easy to order and arrived quickly.
Steven B.
11/1/2023
Lights still look and work like new.
The nicest marker lights I've seen! Discrete and yet bright at the same time!
My purchase was easy to match my existing light, ordering was simple, and received it quickly. Great price too!
I have an Anvil enclosed trailer and these lights are the stock style markers the trailer came with. They were simple to install, worked as expected (nice and bright) and fairly priced. They have been on the trailer for 9 months and show no sign of product failure.
GREAT JOB. THANK YOU
Incredible light with 2 diodes. Used stainless phillips self-tapping #8 screws to mount the light. The negative terminal is hard contact to a side terminal. 6" positive 18 gauge lead cable. Order the snap on plastic chrome cover to finish the look.
A perfect fit for my trailer
GREAT KNOWLEDGE OF PRODUCT-QUICK RESPON SE
Very valued supplier with quality parts and excellent customer service!
Received good products in a timely mann er.
Still working like a champ
Llegó en buen estado gracias [it arrived in good condition thanks]
Great product and fast service.
Fast delivery, exactly what we need it.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Harold
2/19/2024
Well Its just fine but I never did get a response to or receive a catalog