bing tracking image
  1. Trailer Jack
  2. Ultra-Fab Products
  3. Car Hauler
  4. Enclosed Trailer
  5. Utility Trailer
  6. Electric Jack
Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs

Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs

Item # UF38-944040
Retail:$607.59
Our Price: $364.97
You Save: $242.62
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full trailer jack installation instructions. Great price Della Terra Travel Trailer trailer jack and expert service. East to West Della Terra Travel Trailer, 2022 trailer jack by Ultra-Fab Products are available from etrailer.com. For expert service call 1-800-940-8924 to order your Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs part number UF38-944040, or order online at etrailer.com.
  • All Info
  • Reviews (118)
  • Q & A (0)
  • Photos

Ultra-Fab Products Trailer Jack - UF38-944040

  • Car Hauler
  • Enclosed Trailer
  • Utility Trailer
  • Electric Jack
  • Bolt-On
  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jacks
  • 18 Inch Lift
  • With Round Foot
  • Ultra-Fab Products

This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. Extends 6" in 9.5 seconds with 1,000 lbs of tongue weight.


Features:

  • Electric jack lets you lift and lower your A-frame trailer quickly and easily
  • Efficient ball screw makes it fast and easy to position your trailer
    • Ball bearings roll along sturdy, threaded steel rod
  • Powered drive provides quiet operation and eliminates the need for hand cranking
  • Easy-to-access on/off and retract/extend buttons make for simple operation
    • Buttons on front panel will not break off like standard toggle switches
  • LED courtesy light on front of jack allows for simple nighttime setup
  • Durable powder coat finish resists corrosion
  • Emergency override allows manual operation in case of power failure
    • Included adapter allows you to easily use your drill to raise and lower the jack
    • Manual crank handle not included
  • Bolt-on installation


Specs:

  • Bracket height:
    • 10-1/2" Retracted - from mounting bracket to bottom of footpad
    • 28-1/2" Extended - from the bottom of the extended jack and extended footpad
  • Total travel: 22-1/2"
    • Travel: 18"
    • Drop leg: 4-1/2"
  • Drop leg: 4 adjustment holes 1-1/2" apart center to center
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 9.5 seconds
    • Retracts 6" in 8.6 seconds
  • Lift capacity: 4,000 lbs
  • Outer tube diameter: 2-1/4"
  • Footplate diameter: 6"
  • Motor attributes:
    • 12 Volt
    • 10" Travel in 18 seconds
  • 2-Year warranty
    • 10-Year warranty if registered within 90 days


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



38-944040 Ultra Fab Phoenix Power Trailer Tongue Jack - A-Frame - 18" Travel - 4,000 lbs

Installation Details UF38-944040 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs - UF38-944040

Average Customer Rating:  4.5 out of 5 stars   (118 Customer Reviews)

This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. Extends 6" in 9.5 seconds with 1,000 lbs of tongue weight.

by:

I installed this on a construction tool cargo trailer. This trailer is outfitted with solar and a battery bank so an electric jack was a no brainer since I already had plenty of power storage. I didn't want to install in the stock jack location so that I could fully open my truck's tailgate. I was able to find a bolt-on jack bracket from a different online store, which made for a easy installation without welding. The same electrician that installed the solar and batteries wired the jack into the elec system and he said it was slick. The trailer has several thousand pounds of tongue weight and this jack has no problem lifting it. The memory settings are handy. This saves quite a bit of time connecting and disconnecting. With the push of a button the trailer jack lifts or lowers automatically while I deal with the safety chains, break away cable, and 7 prong plug. Just as advertised it lifts very quickly even under load. It was installed about a year ago and it's still going strong. I give this a 5 star rating without hesitation. Strong, durable, and well made.



by:

I LOVE this jack.
I cant stand pushing
a jack button and waiting forever for the jack to run up or down, I wanted something faster. This is it!!
No issues lifting my loaded race trailer, smooth operation, no standing in the rain for 10 minutes waiting for it to run up off the ball of the truck. Best accessory I ever bought for my trailer.
Definitely recommend!

Andreen M.

4/21/2024

My jack actually stopped working about a month ago. It had plenty of power, batteries charged, truck hooked up, nothing mattered, all it did was beep when you pushed the button. I called UltraFab and explained the situation. The woman I spoke to said that there were a couple of years that some had control panel problems. She immediately got me another jack shipped and I received it 4 days later. What a great company with great customer service!! A lot of companies would say youre just sol but UltraFab stood behind their product 100 I will forever be an UltraFab customer!!



by:

I have had 6 trips with the Phoenix 4000 and it worked great for first 4 . Hooking up for 5th trip I pressed button to raise . Button lite up for a second then turned off. Trailer did not raise . I turned power off then back on hoping to reboot and it worked.
It failed again at camp . I used ratchet to operate. When I got home I found 30 amp fuse blown inside of camper . I replaced fuse . I also believe inline fuse provided was loose at spring so I replaced with30 amp blade style fuse . It has worked perfectly now and hoping it will continue.



by:

I like the Fast Jack and the memory function seems like it'll be great. It did get damaged during shipping but we're going to silicone it up and use it. Shipping packaging could be better.



by:

Just installed the jack and compared to the one provided on the travel trailer, it appears much more robust. I purchased this jack for the extended warranty and the ability to manually extend and retract the jack with a socket and drill. The top of the jack was cracked upon receipt despite the foam padding. Ultra Fab was eager to send a replacement top at no cost immediately. Love the customer service.



by:

Very happy with the performance of this trailer jack.The speed is so fast and it has held up very well.



by:

Easy install. Love the memory functions and speed of operation. Also, how can you beat a 10 year warranty?!?!?



by:

I have bought a few items from Etrailer and have found them to be one of the best company to do business with. When I have a question or a issue (which was my fault) they help me solve any problem I had.They have a very fast and very competent customer service department. I can't say enough good about them. Tony



by:

This Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs unit works great. It lifts my car hauler quickly, and with ease. Based on other reviews, I was unclear if the tailgate on my Chevy 2500 would fully open with this jack installed. I installed it with the controls facing to the drivers side to provide additional clearance. With weight on the trucks receiver, the tailgate just contacts the jack when opening, but will fully open. If the jack is extended, and the receiver / tongue is raised, it provides enough clearance to open fully without contact. I'm very happy with this purchase.



by:

I'm on my fourth warranty replacement right now, the latest one has been redesigned to solve the problem I kept having with their control pads. Hopefully nothing else breaks but I have very little faith in ultra fabs designs. Their warranty on the other hand is second to none, call them up and they will get you a new one in the mail right away. At the end, their jacks were only lasting a handful of travels before they died so at that point I could care less what bells and whistles it has as far as memory settings and a remote, I just need to not get me stuck; the jacks kept malfunctioning and would randomly fully extend and stop responding. Imagine my frustration when this happened while driving and my stupid jack started scraping the road I had stop in the middle of the highway with no way to get it back down.



by:

I Love the speed of its raising and lowering. I loved the memory button. Haven't used my trailer all winter and when I went to hook it up, I pressed memory #1 and it raised up to the position to back underneath it. How cool is that? To me, this is the number one best jack on the market.



by:

I have these jacks on my fish house so they have been used in -25F temps. The jacks work great and they are fast.

Richard

12/28/2023

Still working as should but one jack sounds a little rough on retract.

Etrailer Expert

Mike L.

12/28/2023

@Richard Has the jack ever been over extended or retracted? Doing so can damage the jack. The jack is covered by a 2-year warranty.


by:

worked great for 1 year, 4 months. I will be submitting warranty claim. the jack suddenly popped a fuse and stopped working. my electrician checked it and says it is an internal dead short in the motor. lucky me....

Etrailer Expert

Jenny N.

5/15/2023

This jack does have a two year warranty and I will send over the warranty return instructions to you.



by:

Keep scrolling!
This jack has been replaced
twice now within a year. Thankfully Phoenix does send a replacement but having a 16' enclosed trailer stuck to your truck gets old quick. Also, the option to manually turn the jack by hand does not work when the jack freezes up



by:

Easy to install, works very well. Mounting the unit sideways to provide more clearance for the tailgate makes the light point sideways. All fasteners come up from the below which eliminates the possibility for rust. Nice design...



by:

THIS JACK IS BY FAR THE FASTEST AND MOST USER FRIENDLY.I WOULD HIGHLY RECOMMEND THIS JACK.



by:

Easy install. Other than the speed of this jack the best feature is you can mount the front of the jack facing the drivers side so you now have room to lower your tailgate without it hitting the jack.



by:

Very smooth and quiet operation, and seems to be plenty powerful for my trailer. Easy install and no issues after one year. Very happy with this jack.



by:

This is the best jack I have had (and I seem to have gone thru quite a few). It was a quick and easy install for a replacement and I have found it is the fastest jack to raise or lower my hitch. It is also one of the quietest I have ever used. Great for early morning packing and not waking up all the neighbors. :) The jack seems a lot stronger than other jacks I have used and better built with less plastic on it than most. Would definitely replace any manufacture supplied jack on a new trailer with this one again on a heartbeat!

Lonny A.

9/13/2017

I have had a problem with the switch on this jack. It was the first generation of the jack. I spoke with Ultrafab and they replaced the whole jack with a new one without any issue to correct the issue. I am very impressed with the Jack and especially the great customer service! Cant be beat!



by:

This jack is amazing. Fast. Quiet. The memory is very useful. The extra mounting holes on the base plate allow you to spin the jack to place it so that the truck tail gate will not strike the head of it if you drop the tailgate. I highly recommend this jack.



by:

etrailer sent me a used electric jack that another customer returned because it was defective. I know it's defective because the the email between the customer and Greg S at customer service was inside the box. The box was obviously very damaged, taped in areas that were torn, had someone else's shipping label on it, and the jack was filthy. Byron H and Scott H (the two that gathered and packaged my shipment) should have to go remedial training on how to do their jobs. Every item I ordered was opened, there were multiple items just loosely thrown in with one heavy box bouncing around. Terrible experience with etrailer. Sucks when a company stops caring about quality and would rather just let customer service fix their issues. Way to ruin it for the customer!

Etrailer Expert

Jenny N.

11/15/2021

I will have our customer service team reach out to you.



by:

Installation was very easy. Just pulled off the old jack and installed the new Phoenix. Wired it up an WOW!! This thing is FAST!! My travel trailer is 36' long. This operates it up and down like it weighs nothing! My old jack quit working 2 months out of warranty and it NEVER operated half as fast as this one. If the durability is as good as the operation this may be the best tongue jack ever! Being able to double click the up or down button for automatic operation is a great idea! If any problems arise I will try to update this review.



by:

After only a few uses the jack quit working. First the memory settings kept getting "forgotten". I reprogramed them twice before they quite working altogether. I kept using it without the presets but later it would not go up and down. I had to use a wrench and the provided socket to to move the jack which was much harder than expected. While I was turning the jack it started running, ripped the wrench out of my hand, and the wrench handle put a hole in my propane tank cover. The manufacture replaced the jack at no charge but would not do anything about my propane cover. After using the 2nd jack awhile in now is making clicking noises as the tongue is lowering. It sounds like maybe there is a tooth missing on one of the gears. My tongue weight is around 1400 lbs so well below the rating yet the jack does not seem to be holding up well even though it is not use all that often.

Otherwise I do like the jack. It is fast and the memory presets are a nice convenience. I also like that the head is smaller than other similar units.



by:

One year anniversary of installing this on my Airstream Basecamp, works great and really makes life a lot easier compared to the hand crank that came with the trailer.



by:

The jack is very nice. We had an issue with the original; however, etrailer and the mfg immediately replaced it. As always great customer service!


25
118
Show More Reviews

See what our Experts say about this Ultra-Fab Products Trailer Jack

  • Troubleshooting Ram Jack Not Extending or Retracting With Power or By Hand
    It sounds like your 3,500 lb Electric Jack w/ Footplate # EJ-3520-BBX has a bad internal screw. Since you've tried to operate it both electronically with the buttons as well as mechanically with the manual override you've been able to rule everything else out (good job!). Unfortunately it doesn't look like this is a replaceable part so you'll have to replace the jack entirely and for that I recommend either part # EJ-3520-BBX for an exact replacement or the Ultra-Fab Phoenix # UF38-944040...
    view full answer...
  • Can The Phoenix Electric Trailer Jack Be Wired To The 7-Way Instead Of The Battery
    You could power the Phoenix Electric Trailer Jack # UF38-944040 by wiring it to the 12v accessory wire of the 7-way in your junction box, like part # 38656, instead of wiring it directly to the battery. There are pros and cons to this though. The pros being that the wiring is a bit more tucked away and less likely to corrode on terminal in the junction box versus sitting outside with the battery (if you don't have a cover). You'll also never have to worry about a dead battery since you'll...
    view full answer...
  • Is There a Replacement Motor for Tongue Jack on Forest River XLR Boost
    I do have some great full replacement options for you but the motors are not replaceable on trailer tongue jacks. There might be one or two out there which are but none of the dozens we carry ever have that option. Instead, I recommend the Phoenix Electric Trailer Jack part # UF38-944040 which is one of the fastest options on the market and it comes with a 10 year warranty. I have attached a video I did on this very same jack below.
    view full answer...
  • Electric jack Recommendation for 2018 Jayco Jay Flight 242BHSW
    The electric jack I would recommend for your 2018 Jayco Jay Flight 242BHSW is the Phoenix Electric Jack part # UF38-944040 as this is the fastest electric jack out there. Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 9.5 seconds Retracts 6" in 8.6 seconds Most electric jacks are pretty slow but this one is very quick. I attached a review video for this for you to check out as well.
    view full answer...
  • Recommended Electric Trailer Jack For A 2018 Jayco Whitehawk
    Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate # EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and what it lacks in looks it makes up for in dependability. The simple design of this jack also allows for easier replacement of damaged or worn components unlike a lot of other jacks that require complete replacement when something malfunctions. Option...
    view full answer...
  • Trailer Jack for 2019 Forest River Micro Lite
    The electric jack I strongly recommend for your 2019 Forest River Micro Lite 21FBRS is the Phoenix Electric Trailer Jack # UF38-944040 because of its unparalleled performance in regards to speed. This jack will give you 10" of travel in just 18 seconds, making it the sports car equivalent of electric trailer jacks; it has 22-1/2" of total travel and a 4,000 lb lift capacity, which is more than enough for your Forest River. This jack does get wired to a 12 volt power source, as you can see...
    view full answer...
    Image 1 for
  • Electric Trailer Jack Recommendation for Coachmen Travel Trailer
    If you were looking for a cost effective electric jack that would work great on your 1997 Coachman the Stromberg part # JET-2500 that you referenced would work really great. This is a really solid jack that will work great for a long time and it doesn't break the bank. If you wanted something nicer that raises and lowers incredibly quick we have the Phoenix jack part # UF38-944040 which raises and lowers completely in less than 10 seconds.
    view full answer...
  • Mounting Flange Diameter of Phoenix Electric Trailer Jack
    Hey Byron, thanks for writing in, and the mounting flange is 5.3" (or 5-5/16") on the Phoenix Electric Trailer Jack # UF38-944040. You made an awesome choice here with the Phoenix as it's as good as it gets for an A-frame jack. The thing cooks in regards to travel (at least relative to trailer jacks), extending 6" in 9-1/2 seconds. I also thought you might want the rest of the dimensions so I went ahead and got ahold of the manufacturer to get all the dimensions of the Phoenix # UF38-944040.
    view full answer...
  • Recommended Nice A-Frame Jack For Heavy Car Hauler
    Hi Aaron; so there isn't anything that can be used with a cordless impact gun, that's just not something that is attainable. But for a strong, fast, heavy-duty A-frame jack that can handle the weight you need? That we can do with the Phoenix jack: - Phoenix Electric Trailer Jack # UF38-944040 This has a 4,000 lb lift capacity which is more than enough for your 7,000 lb car hauler trailer to use in the manner you described. It also extends 6 inches in just under 10 seconds which I know...
    view full answer...
  • Electric Trailer Jack for Casita Liberty Deluxe Trailer with Weight Distribution Recommendation
    Any of the powered a-frame jacks we carry would have the capacity needed for your setup that includes 400 lb tongue weight from your Casita Liberty Deluxe and lifting the rear of your Suburban for connecting the spring bars of your weight distribution system. On the more economical end the etrailer part # EJ-3520-BBX would get the job done at a really great price and it has a 3,500 lb capacity. If you don't mind a higher price tag the Phoenix part # UF38-944040 would be a really great...
    view full answer...
  • Replacement Powered A-Frame Jack to Replace 3,500 lb Jack that Failed
    Trailer jacks do sometimes fail even when they are being used under their capacity so while it's a bummer that yours did I wouldn't say you did anything wrong and maybe just had some bad luck with yours. For a replacement I really like the Phoenix Electric Trailer Jack part # UF38-944040 which has a slightly higher capacity at 4k but what I really like about it is that it is incredibly fast. It can fully extend or retract in less than 10 seconds. It also has a reputation as being very...
    view full answer...
  • Recommended Heavier Duty Upgrade For FIC 3500 Electric A-Frame Trailer Jack
    Electric A-frame trailer jacks often have the same bolt pattern, yes. Just keep in mind that a higher-capacity jack doesn't necessarily mean more speed, it's all about the jack itself. For example, the 3,500 lb Ultra-Fab Electric A-Frame Jack # UF38-944017 extends 6" in 25.3 seconds (with 1,000 lbs of tongue weight), while the 4,000 lb Bulldog Trailer Jack # BD500200 extends 6" in 28.5 seconds (with 1,000 lbs of tongue weight). That said, since you mentioned wanting a heavier-duty jack,...
    view full answer...
  • Replacement A-Frame Jack for 2020 Grand Design Reflection 300RBTS
    For an A-Frame jack replacement on your 2020 Grand Design Reflection 300RBTS I recommend the Phoenix Electric Trailer Jack # UF38-944040. I'm not sure what your current jack capacity is but this has a lift capacity of 4,000 lbs, which is more than enough for your travel trailer. It has a 10-1/2" retracted bracket height and a 28-1/2" extended height with a total travel of 22-1/2". This also comes with a 10-year warranty if registered within 90 days that can't be beat.
    view full answer...
  • Does Phoenix Electric A-Frame Trailer Jack Have Auto Retract
    The Phoenix Electric Trailer Jack # UF38-944040 retracts with the simple push of a button, so if that is what you meant by "auto retract function" then yes, it certainly does. These buttons are also how it extends, and the accompanying photo shows exactly where these buttons are located on the front of the jack. The Phoenix has a 4,000 lb capacity, offers 22-1/2" of total travel and is an easy bolt-on installation. It is also possible you were referring to something like the Lippert...
    view full answer...
    Image 1 for
  • Best Solution For Gaining Tail Gate Clearance On A-Frame Trailer Tongue Jack
    Since the Ultra-Fab Electric A-Frame Jack # UF97FR has a triangular bolt pattern it would rotate the jack 120 degrees and may or may not work for your application. There are other jacks which have multiple mounting patterns on the flange like the Phoenix # UF38-944040 which will allow for 90 degree placement on the jack. A much simpler option I find is to use an extended Ball Mount # BH20 or a extended Drop Shank # EQ90-02-4600 if you have a weight distribution hitch. This means no mater...
    view full answer...
  • Electric A-Frame Jack Recommendation for 2016 Pacific Coachworks Econ E12RB
    The Stromberg jack part # JET-2500 is a solid choice that will get the job done. It's not the fastest jack on the market but it will save your Dad's shoulder. If you wanted something that works really quickly though the Phoenix part # UF38-944040 basically can fully extend and retract with weight on it in 9.5 seconds. The Stromberg might take a minute or two.
    view full answer...
  • Troubleshooting Ultra-Fab Electric Jack Has no Power When Lifting Trailer
    It sounds like you're saying it is hooked up to power but it doesn't have the ability to raise the trailer. This could be the batteries or a problem with the wiring. It is probably getting power, it just may not be enough to lift the trailer. I would start by checking the wire running to the jack using a circuit tester like # PTW2993. You could also double check the trailer batteries. If you find it has 12V power and still isn't working it may be that the motor is giving out. It would...
    view full answer...
  • How to Charge Battery Bank on R-Pod Using Tow Vehicle and Solar Panel Power
    It looks like you're needing the Redarc BCDC Battery Charger. This comes in a few different sizes but you'll need either the 25 Amp # 331-BCDC1225D or the 40 Amp # 331-BCDC1240D. These will charge the battery bank on your R-Pod via the tow vehicle but they also have a connection for a solar panel setup and will prioritize solar panel over the tow vehicle. They also have a smart charge system so they will read your battery bank and apply the best case scenario to get the battery bank topped...
    view full answer...
  • Stromberg Carlson Electric Trailer Jack Continues to Drop After Lowering
    It does indeed sound like the Stromberg Carlson Electric Trailer Jack part # SC63VR was damaged using the manual override feature without first engaging the switch. This would not be covered under warranty unfortunately so you will need to replace the jack. I recommend the Phoenix Electric Trailer Jack part # UF38-944040 which will be a nice upgrade. This jack offers some of the fastest speeds on the market and it has one of the best warranties available of ten years. I did a review video...
    view full answer...
  • Powered A-Frame Jack Recommendation for 5,600 lb Toy Hauler with Weight Distribution
    The higher the capacity of the jack that you go with the quicker it will raise and lower due to less straining but you could easily get by with a 3,500 lb capacity jack on a trailer with a 700 lb tongue weight. My favorite one to recommend is the Phoenix part # UF38-944040 which is by far the fastest jack out there as it extends in less than 10 seconds. This will make the process of jacking up and down to install your WD system much quicker and easier.
    view full answer...
  • Troubleshooting Phoenix Electric Trailer Jack for Beeping
    When we have seen this before with the Phoenix Electric Trailer Jack, # UF38-944040 it frequently is from an improper voltage reading. The unit is shutting itself off for protection. Please verify that your battery bank is fully charged and in good working order then check all the wiring connections for the jack ensuring you have a good ground.
    view full answer...
  • How to Remove Cover on Phoenix Electric Trailer Jack
    According to Ultra-Fab there should be two screws underneath the head toward the back of the # UF38-944040. Removing these two screws will allow you to lift the cover off. It sounds like a wire inside may have been pulled loose since you have power running up into the jack. If you are unable to repair it Ultra-Fab said it would be covered under the warranty. Assuming you registered the jack within 90 days, you should have a 10-year warranty to cover anything like this.
    view full answer...
  • Troubleshooting A Non-Working Ultra-Fab Phoenix Electric Trailer Jack
    If your Phoenix Electric Trailer Jack # UF38-944040 has power but isn't extending/retracting and the light isn't working then your in-line fuse has most likely blown. If you look at the attached video below around 9:30 minute mark Conner will show you the included fuse holder. You'll want to unscrew the cap on the fuse holder and check that the wire inside the fuse isn't blown apart. You can pick up replacement 30 amp slow blow fuses at your local hardware store.
    view full answer...
  • Are There Trailer Jack Options That Allow You to Fully Open a Truck Tailgate w/ a Travel Trailer On
    Your truck tailgate hitting the electric jack on your 2022 Keystone Springdale TT is a pretty common occurrence. Unfortunately, I am not able to determine what jack you have from your RV information. But, I have listed a couple potential options. I am unfamiliar with the taller post jacks you mentioned and did not find much on them. The first thing you could look at, is if you can rotate the jack to face the side. This typically provides a couple more inches of clearance. A jack like the...
    view full answer...


< Previous



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Amber S
Video by:
Amber S
Employee Thomas T
Video by:
Thomas T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Conner L
Installed by:
Conner L
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Mike S
Updated by:
Mike S
Employee Eric H
Updated by:
Eric H
Employee Kristen H
Written by:
Kristen H
Employee Michael H
Test Fit:
Michael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.