Mounting Flange Diameter of Phoenix Electric Trailer Jack

Updated 04/15/2024 | Published 04/08/2024

Question:

What is diameter of the mounting flange?

asked by: Byron

Expert Reply:

Hey Byron, thanks for writing in, and the mounting flange is 5.3" (or 5-5/16") on the Phoenix Electric Trailer Jack # UF38-944040.

You made an awesome choice here with the Phoenix as it's as good as it gets for an A-frame jack. The thing cooks in regards to travel (at least relative to trailer jacks), extending 6" in 9-1/2 seconds.

I also thought you might want the rest of the dimensions so I went ahead and got ahold of the manufacturer to get all the dimensions of the Phoenix # UF38-944040.

expert reply by: Kyle S

Dimensions of Phoenix Electric Trailer Jack
(click to enlarge)

Byron

4/15/2024

Thank you for getting back to me. I appreciate it. The dimensions from the mfgr are helpful. I could have used the bolt pattern of the mounting flange. I'm fabricating a mount for the jack, which is ordered but not yet received. Once the jack arrives, I can slide it into the holes in the mount, mark the bolts and then drill. Not as neat and tidy as if I'd used a drill press before the mounting plate was welded to the trailer tongue but it will get the job done. Again, thank you for the quick response.