bing tracking image
Customer Service My Orders
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class II
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2019 Volkswagen Atlas
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12065
35 Reviews | 26 Questions
In Stock
$270.48
Retail:$420.95
You Save: $150.47
 Trailer Hitch
Not Confirmed to Fit

2019 Volkswagen Atlas

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class ii 1-1/4 inch
curt trailer hitch class ii c12065
curt trailer hitch class ii c12065
curt trailer hitch class ii
curt trailer hitch for towing receiver - custom fit class ii 1-1/4 inch

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2004 toyota sienna trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch
2004 toyota sienna trailer hitch curt for towing c12065
2004 toyota sienna trailer hitch curt for towing on a vehicle
2004 toyota sienna trailer hitch curt class ii on a vehicle
2004 toyota sienna trailer hitch curt class ii c12065
2004 toyota sienna trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch
2004 toyota sienna trailer hitch curt for towing c12065
2004 toyota sienna trailer hitch curt for towing class ii receiver - custom fit 1-1/4 inch
2004 toyota sienna trailer hitch curt for towing class ii on a vehicle
2004 toyota sienna trailer hitch curt c12065
2004 toyota sienna trailer hitch curt class ii c12065
2004 toyota sienna trailer hitch curt class ii c12065
2004 toyota sienna trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch

Show All (13) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" customer photo
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Videos

Show All (10) Videos

Show Fewer Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12065 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (35)
  • Q & A (0)
  • Related Parts
  • Photos

CURT Trailer Hitch - C12065

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 3,500 lbs (GTW): Handles small campers, boats, and utility trailers safely
  • Holds up to 350 lbs (TW): Supports bike racks and cargo carriers for extra hauling options
  • Bolt-On Installation: Mounts with standard tools using included hardware—no welding needed
  • Durable Steel Build: Fully welded, square-tube design provides lasting strength for towing
  • Gloss Black Powder Coat: Protective base coat resists rust and wear for long-term use
Made in USA

Features to know about

Add Towing Power Without Overkill: Class II 1-1/4" Receiver for Light-Duty Hauling

When you just need to tow a small trailer, move a lightweight camper, or mount a bike rack, you don’t need a giant hitch. This Class II receiver gives you a 3,500 lb gross trailer weight rating and 350 lb tongue weight rating—perfect for light-duty jobs. It’s built from fully welded, square-tube steel for strength and stability so your load stays secure on the road.

Do More Yourself: Bolt-On Install with Included Hardware

You can install this hitch yourself with basic tools—no welding required. The bolt-on design lines up with existing attachment points and uses the included complete hardware kit. The fit is precise, so you can get it mounted in the driveway without complicated fabrication or drilling.

Keep It Looking Good: Durable Gloss Black Powder Coat Finish

The hitch is finished with a gloss black powder coat over a protective base layer to fight off rust and corrosion. That means it can handle wet roads and winter grime without flaking or fading. Even after years of towing or hauling bikes, it keeps its clean look instead of turning dull or rusty.

Specs

Dimensions

  • Receiver opening: 1-1/4" x 1-1/4"

Weight and Capacity

  • Rating: Class II
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs

Warranty

  • Limited lifetime warranty

12065 Curt Class 2 Trailer Hitch Receiver

Installation Details C12065 Installation instructions

This Product Fits The Following Vehicles






Customers Who Purchased This Trailer Hitch Also Bought...





Customer Satisfaction Score:

Ratings & Reviews

4.5

35 reviews
5 Stars
(24)
4 Stars
(9)
3 Stars
(0)
2 Stars
(0)
1 Star
(2)
Review Sort Icon
by:
2010 Toyota Sienna
Read all the reviews and decided on the 12065 for my 2006 Toyota Sienna. Arrived in just a couple of days and install took about 40 minutes. I took my cleaning brush from my .357 magnum gun cleaning kit and sprayed the bolt holes on my chassis with WD 40 and used the brush screwing it in and out of each hole then tried the supplied bolts, each one could be threaded in by hand "Great!". I backed my vehicle's back tires onto 2 pieces of 2 x 10 board just to give me a little more room, took 2 bottle jacks, lifted and slipped the hitch over the exhaust pipe and rested the hitch on the bottle jacks, raised each side, taking turns to keep it level raising it up into position, screwed in the bolts. I did not have to lower the exhaust pipe, just took a piece of board and jammed it between the pipe and hitch giving me enough room to get my socket wrench on. My van did not have the underbody trim and the bottom black lip molding did not need to be cut out as per instructions. I really like this hitch because it almost invisible other than the 1"1/4 in receiver showing. This product not only met my expectations but exceeded them!
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
Nice for what I need, fairly easy novice install, wiring a bit more challenging but done and working, all good so far, trip coming up for a test, we'll see
by:
I need a hitch to hold a bike rack for my minivan. I ordered this hitch because it's almost invisible, my previous hitch stuck out and frequently bottomed out when backing out of my driveway. One year later, it's been great. It's easy to reach to put on/off my bike rack, but is recessed enough to not stick out. Also, it hasn't rusted like previous hitches I had purchased.

Installation was easy, it took me about 2 1/2 hours from start to finish.
by:
2018 Toyota Sienna
The hitch bolted on easily and the etrailer's video made the installation very simple. I plan to use this for carrying bikes with a Yakima Hold up. The only negative for me is that the hitch is not flush with the rear bumper, so my bike rack is close to rear hatch (less than one foot when folded up and not carrying bikes). Consequently, when bikes are loaded, I cannot use the bike racks's ability to tilt down and away from the vehicle which would normally allow you to open the hatch. The bikes still block the hatch from being opened. The flip side is that, when not in use, the hitch blends in and does not detract from the van's appearance.
by:
2015 Toyota Sienna
Service from etrailer.com was top notch. I am a happy return customer.

In my opinion this hitch (C12065) is the best for a Toyota Sienna as ground clearance is an issue. Just installed one on my new '15. On my previous '09 Sienna I had the 2" Curt hitch C13105 which tended to scrap when going up steep driveways. This one sits significantly higher which is great and it also looks much better too.

For a Toyota Sienna this is the one to get.
by:
2010 Toyota Sienna
This is a nice hitch and it is as advertised for our 2010 Sienna XLE. fit like it should with no problem. Some trimming of undercarriage sheet metal was necessary, as expected.
by:
Toyota Sienna
Hitch installed easily and with no problems. Took two of us. Didn't need to remove exhaust pipe. Cut lower panel with hack saw without removing from car. Hitch was the lowest profile of any I researched. Good solution for low ground clearance Sienna.

Wiring kit also installed as expected. Routed power wire through electrical wiring bushing in firewall. Ran wire under door thresholds with other vehicle wires.
by:
Toyota Sienna
Curt Trailer Hitch Receiver Class 2 -11/4 fits very good i is first class product. I recommended it for Toyota Sienna.
by:
Toyota Sienna
Curt Trailer Hitch Receiver Class 2 -11/4 fits very good i is first class product. I recommended it for Toyota Sienna.
by:
2nd trailer hitch I've purchased from etrailer. Quick delivery. Instruction video was really helpful for guidance in installation.
by:
I am very satisfied with my hitch and lighting harness, and the mounting procedure was very workable as described.
It is preforming daily and provides increased utility of my 2004 Sienna.
by:
Toyota Sienna
just what I expected. Went on easy and does the job for hitching up the bike rack when needed. (Toyota Sienna).
by:
Fit and works as expected. The first hitch they delivered was bent. How I have no idea; but when I contacted etrailer they rectified things quickly and sent a knew one without any hassle. Highly recommend doing business with them!
by:
My hitch package came when they said, it was a easy install. The light package video was very helpful. Thanks. Jim.
by:
Fits properly for neat installation. Used it last spring to pull trailer from Texas to Minnesota.
by:
I've had this product installed on my vehicle for about a year. I used it to pull a wood splitter with no problems. It was reasonably priced and works great.
by:
2004 Toyota Sienna
arrived quickly, easy installation instructions
by:
fast shipping, parts fit
by:
2008 Toyota Sienna
hitch was perfect fit, probably the best made for my app.
elec kit directions were kinda vague; my auto background helped.
overall, excellent purchase...
by:
Went on my 12 Sienna like a champ. Pretty easy overall, use a tourqe wrench to ensure the bolts going to the frame are tightened to spec.
Steve A. profile picture

Steve A.

4/23/2021

Fantastic!!!

by:
I recently installed a curt trasiler hitch on my toyota sienna . I've installed a number of these before but this one took 3 hrs instead of 1 . I had to pry and widen the hitch to line up with the factory holes . This was very hard to do being an all welded assembly . The shipping box was undamaged so I'll have to give this product a poor rating .
Jenny N. profile picture
Etrailer Expert

Jenny N.

2/20/2023

It sounds like that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.

Helpful Links

faq-my-trailer-hitch-doesnt-fit.aspx

by:
2013 Toyota Sienna
Installation wasn't too bad; it took me about two hours, but I was doing it almost entirely by myself and didn't have a good way to hold up one end of the hitch while I was working on the other. I mounted my bike rack (primary purpose in this case) briefly and it seems fine. Haven't had opportunity to load it up and travel, yet.

I did have to trim the under-body panel. A tip for other DIYers: the image of the panel on the instructions is a top-down view, a perspective you probably won't have because taking the panel off without ruining any of the multitude of connectors is unlikely. Some mental gymnastics and you can probably translate to a bottom-up view in your head. The panel cut easily with a sharp utility knife.
by:
I got it in time, looks very good, feels good quality, I installed it in 15 minutes. I believe it's going to last. Buy this product with confidence.
by:
2013 Toyota Sienna
Item was easy to find on line. Description was clear and accurate and item was delivered in three days.
by:
2011 Toyota Sienna
Good solid tow bar and used the online instructional video for easy install.
25
35
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?
  • Replacement Hardware For A Curt Trailer Hitch On A 2015 Toyota Sienna
    Hey Richard, We can definitely get you a replacement hardware kit for your Curt trailer hitch. All of the Curt trailer hitches confirmed to fit your 2015 Toyota Sienna use the same hardware because they mount into the factory weldnuts. You'll just need to go to the # RHK product page and in the hitch item number box you can enter one of the following part numbers to get the hardware: # C13343 # C13105 # C12065
    view full answer...
  • What Size are the Weldnuts on a 2004 to 2012 Toyota Sienna for Trailer Hitch Installation
    If you look at the instructions for the Curt trailer hitch, # 12065, that I have linked, you will see that it uses M12 - 1.25 x 40 sized bolts. This means that the weldnuts in a 2004 to 2012 Toyota Sienna are the same size. On a vehicle that has seen at least one winter, the weldnuts can get corroded and impacted with grime, making them seem too small for the hitch hardware. If this happens to you, you will need to clean out the weldnuts using a spray lubricant and a wire brush, # DW00254....
    view full answer...
  • Which Trailer Hitch Has the Most Ground Clearance for a 2006 Toyota Sienna
    All of the trailer hitches for your 2006 Toyota Sienna are going to sit in the same area. You'll get slightly better ground clearance from a hitch with an 1-1/4" receiver and when the installed the Curt # C12065 and Draw-Tite # 36513 Class II hitches on the same model year Sienna the difference in height was 1/8" and that small of a difference could honestly be contributed to ground the measurement was taken on or even the amount of pressure in the tires at time. With all of that being...
    view full answer...
  • Recommended Trailer Hitch Receiver With Best Ground Clearance for 2017 Toyota Sienna
    For your 2017 Toyota Sienna, the best ground clearance will be the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76112 which will give you a ground clearance of about 9-1/2 Inches. If you need the smaller 1-1/4 inch hitch receiver, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12065 is your best clearance. This hitch receiver has a ground clearance of just over 9-1/4 inches to the bottom of the receiver.
    view full answer...
  • Recommended Hitch w/ the Best Ground Clearance on a 2011 Toyota Sienna XLE
    The Curt Trailer Hitch item # C12065 is going to give you better ground clearance than the Draw-Tite item # 36513 by 3/4". The Curt is 11-3/4" from the top of the receiver to the ground and the Draw-Tite is 11" from the top of the receiver to the ground. Neither one of these hitches do a good job of concealing the crossbar. If you are interested in a hitch that conceals the crossbar then I recommend going up to a 2" receiver and getting the etrailer Hitch item # e98853. This hitch is...
    view full answer...
  • Hitch and Weight Distribution Recommendation for 2006 Toyota Sienna for Towing Pop-Up Camper
    Your 2006 Toyota Sienna can be fitted with two sizes of hitch, a 1-1/4-inch Class II type like # C12065 or a 2-inch Class III type like # C13105. You must have a 2-inch Class III hitch in order to use a weight distribution (WD) hitch on your car. The sticker on your hitch will tell you if it is rated for use with WD systems. A WD system must be tuned to the actual loaded trailer tongue weight in order to work properly. You need to measure the fully loaded camper's tongue weight, just as...
    view full answer...
  • Recommended Ball Mount for a 2006 Toyota Sienna Ball With a Class II Trailer Hitch
    The recommended ball mount for your 2006 Toyota Sienna would have a 2-5/8 inch rise, like Curt ball mount # C45016. This would put the hitch ball at the most common trailer height, but to ensure it will work with your particular setup, I would recommend taking a couple simple measurements. First, measure from the ground to the top of your class II hitch opening. Then, with your trailer level, measure from the ground to the flat bottom of the trailer coupler. The difference between these...
    view full answer...
  • What is the Recommended Ball Mount for a 2005 Toyota Sienna with a 1-1/4 Inch Trailer Hitch
    For a Class I or II trailer hitch with a 1-1/4 inch trailer hitch, you must use the ball mount that is recommended by the trailer hitch manufacturer. The reason is that the hitch has been tested with a specific ball mount and it is deemed to be the safest and best option for that vehicle and hitch combination. The only 1-1/4 inch hitch we carry for your 2005 Toyota Sienna is # C12065. The correct ball mount for this hitch is # C45016, and it must be used in the rise position only. It has...
    view full answer...
  • Best Cargo Carrier For 1-1/4 Trailer Hitch on 2005 Toyota Sienna
    I do have a cargo carrier to fit your 1-1/4" hitch on your 2005 Toyota Sienna but there are no 1-1/4" carriers that can haul 500 lbs. If you have the Curt # C12065 the maximum tongue weight capacity is 350 lbs and the Draw-Tite # 36513 is 300 lbs. It is recommended to go with whichever is the lowest weight rating between your hitch and cargo carrier. The Reese Explore 20x47 Cargo Carrier # 63155 is my favorite 1-1/4" cargo carrier because of its size and capacity. It has a max weight...
    view full answer...
  • Troubleshooting 2004 Toyota Sienna With Weld Nuts For Hitch Install Not Holding Torque
    For your Curt Trailer Hitch Receiver- Class II - 1-1/4" # C12065 on the 2004 Toyota Sienna, the weld nuts being stripped out will require tapping the weld nuts and using larger bolts. The # RHK kit will give you the hardware that came with the hitch to fit the current weld nuts. You will need to get a tap locally and get Grade 8 bolts to fit that new thread size.
    view full answer...
  • Will Trailer Hitch For 2004 Toyota Sienna Fit 2015 Sienna
    We offer four trailer hitches that are confirmed to fit both the 2004 and 2015 Sienna. If you have a Curt, part # C13105, or Curt part # C12065, or Draw-Tite, part # 36513, these are confirmed to fit both vehicles. The Curt C12065 is a Class ll hitch and has a 1-1/4 inch receiver opening. C13105, and 36513 are Class lll hitches and have 2 inch receiver openings. If you have one of these hitches and plan on removing it from the 2004 and installing it on the 2015, you will need new installation...
    view full answer...
  • Recommended Trailer Hitch with the Highest Clearance for a 2013 Toyota Sienna
    The smaller Class II hitches like # 36513 will give you a little more clearance vs. Class III hitches. The Class II will have lower tongue weight and gross trailer weight capacities. A bike rack with a rise in the shank will provide more ground clearance. When we have installed trailer hitch # 36513 on Toyota Sienna vans the same generation as yours we measured approximately 11 inches from level ground to the top of the receiver opening. To the bottom of the receiver that would be approximately...
    view full answer...
  • Recommended Hitch for Carrying Bike Rack on 2015 Toyota Sienna
    Is your bike rack compatible with a 1-1/4 inch or a 2 inch receiver? We offer both for the 2015 Sienna. I'll typically recommend a 2 inch hitch, because it's the most popular size and therefore will have the best selection of hitch mounted accessories available for it. For a 2 inch hitch that uses a partially concealed design that places the hitch crossbar behind the bumper so it's not visible, I'd recommend the US made etrailer brand Class III hitch, part # e98853. If your bike rack is...
    view full answer...
  • Which Trailer Hitch Has Better Ground Clearance for a 2011 Toyota Sienna Curt or Draw Tite
    It's not by much but it looks like the Draw Tite Hitch part # 36513 tucks a little bit closer to the rear bumper than the Curt part # C12065. The difference is right around an inch. Another advantage the Draw Tite has is that it doesn't require the use of a stabilizer strap like the Curt does when carrying a non-supported load like a bike rack. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Trailer Hitch Recommended For Carrying Bike Rack on 2015 Toyota Sienna LE
    When the choice is available, I'll typically recommend going with a Class III hitch with the 2 inch receiver opening, as there are many more available choices for hitch mounted accessories. If your bike rack is compatible with a 2 inch receiver, I'd recommend a partially concealed design hitch like the Curt Class III, part # C13343. This hitch would have the crossbar concealed behind the bumper, with only the receiver tube and the safety chain loops being visible. If you'd prefer the...
    view full answer...
  • Recommended 1-1/4-Inch Class II Hitch for 2015 Toyota Sienna AWD
    We offer several 1-1/4-inch Class II trailer hitch receivers for your 2015 Toyota Sienna AWD that can be seen on the link provided. Among them the one I suggest for its higher 350-lb tongue weight (TW) rating is the Curt # C12065. The actual weights of these various hitches do vary slightly but their resulting appearance after installation will be very much the same. Please refer to the linked video showing installation in a 2014 Sienna. All of the required hitch installation hardware...
    view full answer...
  • Using Class II Receiver Hitch Instead of Class III on 2011 Toyota Sienna to Gain Ground Clearance
    Although different hitches for a given model year of vehicle can vary a bit, the orientation of the receiver will usually be the same. When installed, the Curt Class II hitch part # 12212 will measure approximately 11 inches from the top of the receiver tube to the ground. Due to the smaller receiver, you will gain around 1/2 an inch more clearance versus the Class III. I attached installation instructions for you to check out also. You might also consider the Roadmaster Roll Away Trailer...
    view full answer...
  • Mostly Hidden Hitch Option for 2012 Toyota Sienna
    For Class II hitches for your 2012 Toyota Seinna we only have options that have the cross tube visible like the Curt # C12065. For a more hidden option you'd want the etrailer part # e98853 which is a Class III hitch that instead has a 2 inch hitch opening size. This does not require the bumper to come off for install either. It does require lower panel (not fascia) trimming and that the underbody panels to be temporarily removed.
    view full answer...
  • What Size Tap Can Be Used to Clean Weld Nuts to Install Hitch on 2004 Toyota Sienna
    I checked with one of my tech contacts over at Curt and he says you're going to need an M12 x 1.25 tap in order to clean out the bolt holes on your 2004 Toyota Sienna; you can also use some PB Blaster and a wire brush to clean out the weld nuts. You will want to be careful when starting the process so as not to strip out the weld nuts when getting them started. For reference, the bolts used to install the Curt # C12065 are M12 x 1.25 Grade 8 bolts that are 40 cm long.
    view full answer...
  • Trailer Hitch with Best Ground Clearance for a 2013 Toyota Sienna
    For max ground clearance a 1-1/4 inch hitch will be the best option since the smaller hitch opening means better ground clearance. On a vehicle like yours there really isn't an option that is going to have great ground clearance, but we have found that the Curt part # C12065 would give you the best ground clearance at 11-3/4 inches from the top of the hitch opening to the ground. This is about 3/4 inches better than the Draw Tite. The recommended ball mount is part # C45016. For a 2 inch...
    view full answer...
  • Installation Instructions for the Curt Hitch C12065 on a 2008 Toyota Sienna
    I attached a link to the installation instructions for the Curt Hitch part # C12065 that you have installed on your 2008 Toyota Sienna that includes all of the torque figures for the installation hardware. I also attached an install video for this hitch for you to check out.
    view full answer...
  • Trailer Hitch Fits for 2017 Toyota Sienna
    Sometimes a trailer hitch will fit multiple model years of a vehicle but other times one model year's difference can mean it won't. Curt Class II hitch # C12065 fits various versions of the 2004 through 2016 Toyota Sienna. However this hitch is not a confirmed fit on the 2017 model year. For the 2017, the 1-1/4-inch Class II hitch that is confirmed to fit is Draw-Tite # 36513. Curt offers only a 2-inch Class III hitch for the 2017 Sienna, part # C13105. I confirmed this directly with...
    view full answer...
  • Will Anderson Alumistinger Ball Mount # AM3507 Fit CURT Hitch on 2013 Toyota Sienna
    We have 2 CURT hitch receivers that fit your 2013 Toyota Sienna. The CURT Trailer Hitch Receiver # C13105, a Class III, 2 inch receiver that uses the # 2753 ball mount and provides a 4 inch drop or 2-3/4 inch rise. I have provided a link to instructions on the proper installation of this item and a link to a video showing the installation of this product on a 2012 Toyota Sienna. We also carry the CURT Trailer Hitch Receiver # C12065, a Class II 1-1/4 inch receiver that comes with the CURT...
    view full answer...
  • Trailer Hitch Fits and Resulting Ground Clearance for 2007 Toyota Sienna
    The nature of the 2007 Toyota Sienna's design means it will sit lower than many vehicles, and this then means that an installed hitch receiver will do the same. All hitches for your car, shown on the linked page, install at the exact same mounting points and will rest just under the rear bumper cover. Any hitch, whether a 2-inch Class III type like # C13105 or a 1-1/4-inch Class II type like # C12065, will reduce your ground clearance to some degree. I linked a hitch install video for reference. I...
    view full answer...


< Previous
12
Next >



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Dan D
Edited by:
Dan D
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!
Call 1-800-940-8924