Which Trailer Hitch Has Better Ground Clearance for a 2011 Toyota Sienna Curt or Draw Tite

Question

Question:

For 2011 Toyota Sienna - TRAILER HITCH Comparing Curt #C12065 and DrawTite #36513 Which one fits the closest to the bumper. The one with the LEAST open vertical space between the top of the receiving hitch to the bottom of the plastic exterior rear bumper of the car. Thanks, Any question let me know. I await.

asked by: Ray R

0

Expert Reply:

It's not by much but it looks like the Draw Tite Hitch part # 36513 tucks a little bit closer to the rear bumper than the Curt part # C12065. The difference is right around an inch. Another advantage the Draw Tite has is that it doesn't require the use of a stabilizer strap like the Curt does when carrying a non-supported load like a bike rack.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 3

Hey Tanner! These hitches are all pretty similar so it can be hard to decide between them. If I were you I would choose the Curt #C77MJ over the other two. The Curt #C77MJ and etrailer #e84ZV actually share the same design, and both have the…

view full answer...

Answer 4

Hi Peter! The Tekonsha wiring harnesses are the most reliable on the market, so the T-One #118648 is a great choice for your 2018 Toyota Sienna XLE Limited AWD. The Draw-Tite #76112 will also fit your Sienna, but our etrailer #e98853 is a little less…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Steve, we have just what you are looking for with the Easy Grease idler hub part #AKIHUB-545-2-LF-2K. This matches the bolt pattern and bearings your hub has and also is pre-greased! How many kayaks do you fit on the trailer?

view full answer...

Answer 7

Hey Andy welcome back! The Swagman E-Spec Pro Bike Rack item #S45SR will work with your 2 Lectric XP 3.0 e-bikes and is rated for use behind 5th wheel trailers and travel trailers. However, it's not the best option if you have a 5th wheel…

view full answer...

Answer 8

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

view full answer...

Answer 9

I can absolutely help with choosing a trailer hitch for your 2020 Toyota Sienna that will give you the best ground clearance. There are quite a few hitch options available for your vehicle, but the models that will sit highest off the ground when…

view full answer...

Which Trailer Hitch Has Better Ground Clearance for a 2011 Toyota Sienna Curt or Draw Tite

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching