1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Drop - None
  6. Rise - 3 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Item # 36063
lowest price pledge
Retail:$54.89
Our Price: $26.33
You Save: 52%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs Drop - None,Rise - 3 Inch 36063
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs part number 36063 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1457)
  • Q & A (35)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 36063

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Drop - None
  • Rise - 3 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 11-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 3-18" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36063 Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Replaces 90005

Replaces 90007




California residents: click here



Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs - 36063

Average Customer Rating:  4.8 out of 5 stars   (1457 Customer Reviews)

Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

- 36063
by:

I ordered a few products at one time and, before ordering, had some questions about compatibility. My questions were answered quickly and accurately. Products arrived more quickly than expected and were in good shape (no damage). I found the product videos very helpful when shopping. My ATV isn't here yet so I can't comment on fitment.


Comments
Have had a chance to use this a handful of times. Fits my ATV perfectly and is strong. Useful for a number of pulling applications.
Steven D - 05/05/2021


- 36063
by:

Product: I was a little bit surprised that this drawbar has some play when installed into the hitch. I would expect it slide in and have no space for wiggling side to side. Packaging: I would give it 2 stars but don't want to affect the product itself. Package came destroyed, drawbar is scratched (or rather "one corner is sanded to bare metal"). This is how package looked when received. You guys selling heavy pieces, can you invest in packing a little bit more? p.s. The hitch I received a week early had the same problem - one side sticking out of the box, scratched.


Comments
The drawbar and the receiver tube on your hitch like any mass-produced product, has to be within a certain size tolerance. No 1-1/4 inch receiver tubes inside dimension will measure exactly 1-1/4 inches, it will always be a little bit larger. The shank of any accessory designed to fit a 1-1/4 inch receiver wont measure exactly 1-1/4 inches. If the receiver and shank were both exactly 1-1/4 inches, they would not fit together. Occasionally, youll get a hitch mounted accessory with a shank thats on the small side of tolerance used in a receiver thats on the large end of tolerance. When that happens, there will be more movement of the drawbar in the hitch. There are various anti-rattle devices available such as # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$41.97
that will tighten up the connection between the drawbar/hitch accessory and the receiver tube.
-- Etrailer Expert Mike L - 05/18/2018


- 36063
by:

Installation is self explanatory, in my case it puts the ball at the same height it was on my truck. I'm only using this for pulling a small utility trailer that I put my dirt bike in, but the construction (weld) felt solid enough for larger pulls like a small camper.


Comments
Ive pulled my dirt bike trailer all over the state with zero issues. No problems neither on or off road. Considering the lead foot I get sometimes, no signs of wear or abuse have shown, it has remained stable from day one. Thanks
Daniel - 02/18/2019



- 36063
by:

Good price and service. It pulls stuff with power and authority. When cars behind me see this drawbar, they honk their horns in awe and surprise. Families pull their children in tight as my drawbar thunders by.



- 36063
by:

The hitch was easy to install and looked as if it should have been there all along. I used it to pull my motorcycle trailer, and absolutely no problems. Alas, I sold the 2013 Beetle back to VW in January of this year over the "DieselGate" situation. I had gotten hold of a 2003 Beetle Diesel to replace it, and got a hitch from eTrailer for it. (The 2013 hitch would not work on the 2003.) Same story. Easy. And the installation videos eTrailer makes available lets you know just what and how everything needs to be done.


Comments
The entire installation on my 2003 Beetle TDI is still performing as it should. eTrailer knows towing, and always has helpful information.
NM_Bob - 05/03/2018



- 36063
by:

Purchased Trailer Hitch, Auto Trailer Light Kit, and new Trailer LED lights kit. All shipped Quickly, installed easily, work perfectly. 5 Stars for eTrailer



- 36063
by:

It looks to have been used or found on the side of a road very disappointed


Comments
I am sorry to hear about any inconvenience with your order and have sent your review and pictures to our customer service team for direct follow-up with you.
-- Etrailer Expert Laura E - 07/10/2017


- 36063
by:

Product is exactly as expected! Service is also exceptional, same as on past orders. I wasn't in a rush, but etrailer got the order out the same day, and because I'm within 1 day UPS ground shipping in Kansas City, the order arrived the next day. I really appreciate the great communication from etrailer, I received an email to let me know it was shipped the same day the order was received, and received a second email today to confirm that it had been delivered. Very helpful! I can't recommend etrailer highly enough!



- 36063
by:

I received the hitch on time and in great shape!



- 36063
by:

My Lincoln Town Car hitch requires a extra-long and rather rare Towing attachment. etrailer is the only one I could find on the internet that had one and at a good price. Workout perfectly.



- 36063
by:

This product is exactly what I expected and what I needed. This company did a fantastic job and got it to me very fast, BRAVO!



- 36063
by:

It came in good condition.



- 36063
by:

Excellent service great price and quality product. Would by from etrailer.com anytime. Thanks, Ralph



- 36063
by:

Everything I needed, mechanic installed it in about an hour.



- 36063
by:

The product came as advertised and worked fine. The price was also reasonable.



- 36063
by:

One year on, it is still in great shape. The paint is holding up fine in heavy use. No quality problems.



- 36063
by:

Product was as stated and good quality. Thank You etrailer.



- 36063
by:

Fit on the hitch as described.



- 36063
by:

Just what I needed



- 36063
by:

Mine did not look new, it had a lot of chips in it , and the finish was very dull.



- 36063
by:



- 36063
by:

Very quick delivery and exactly what I needed. Thanks!!!!!!



- 36063
by:

Perfect fit.



- 36063
by:

Easy to order part arrive quicker than expected very good quality



- 36063
by:

Excellent product, quick shipping service. I would use this company again without reservations.


28
1480
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch Ball Mount

  • Recommend Hitch and Wiring For 1997 Toyota Tacoma
    I do have an option for you but the Draw-Tite Trailer Hitch Receiver part # 36116 is designed to fit certain years of the Lincoln Town Cars and Mercury Grand Marquis so it will not fit the Toyota. The part # 36063 the sticker references is a ball mount that is recommended for use with the hitch determined by Draw-Tite. For a 1997 Toyota Tacoma, I recommend Curt Trailer Hitch Receiver part # 13013 which is a custom fit design for the Toyota Tacoma that will not require any drilling...
    view full answer...
    Image 1 for
  • Drawbar included with Hidden hitch, part # 90139
    The drawbar that is included with Hidden Hitch, part # 90139 (no longer available), is Class II Drawbar 3-1/8" Rise (Kit), part # 36063. It fits 1-1/4 inch, Class II hitch receivers.
    view full answer...
  • Ball Mount with at Least 3 Inches of Drop that is Longer Than 9-3/8 Inches Long for Old Rat Trike
    Ball mount # 36063 does have to be used in the rise position only. How about ball mount # 3592. It has a drop of 2-3/4 inches and measures 9-3/4 inches from the center of the hitch pin hole to the center of the ball hole. It is designed for Class I or II hitches. This is going to be the best option out of the ball mounts we carry.
    view full answer...
  • Recommended Ball Mount Compatible With 1998 Cadillac DeVille
    Based on the confirmed fit trailer hitch receivers we have for your 1998 Cadillac DeVille, I assume you have a 1-1/4 inch receiver opening. Because of how far back this sits from the bumper, I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs # 36063. With this ball mount you can use # 19258 for a 2 inch hitch ball or # 19257 for a 1-7/8 inch ball.
    view full answer...
  • Recommended Ball Mount for a 2010 Toyota RAV4 With Factory Towing Package
    For your 2010 Toyota RAV4 Factory Hitch, you'll want about a 3 inch rise. You can confirm this by measuring from the ground to the top of the trailer hitch, and measuring from the ground to the bottom of the coupler. Then, subtract the higher number from the lower number. It does sound like you've gotten this about right though. If yours is a 1-1/4 inch hitch, I recommend the Draw-Tite Drawbar, part # 36063. This will give you a correct, 3 inch rise with a 3/4 inch ball hole diameter....
    view full answer...
  • Do I Modify My Auto Level Housing to Install a Draw-Tite Hitch # 36309 on my 2000 Buick Le Sabre
    In order to install this Draw-Tite Receiver Hitch, part # 36309, you will need to remove the rearmost fastener which secures the load leveling control housing to the frame rail and discard it. You will then trim the load leveling control housing around where the previously removed fastener was. See the picture to the right for further clarification. Some other items you may need: Draw Bar # 36063 Ball # 19258 or 19256 Trailer Wiring # 119176KIT
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendations for a 2008 Buick Lucerne Base Model, Special Edition, or Super
    In order to determine if your 2008 Buick Lucerne is a standard model CXL or a special edition, there are a couple of things you can do. If the driver seat is a power memory seat that remembers your settings and your tires are size 245/50R18, then you have a special edition. But the definitive way to determine the trim level of your Lucerne is to contact a local dealer and have them run the VIN number of the car and they will be able to tell you for sure which one you have. The Curt Trailer...
    view full answer...
  • What is the Difference Between 2008 Buick Lucerne Special and Super Models and Regular Models
    The Super and Special are trim and packages that the 2008 Buick Lucerne could come with. The CXL Special Edition will have a chrome grille and chrome clad 17 inch wheels and a badge on the trunk that indicates it is a Special model. The Super can be identified by a rear spoiler. If you have a Special or Super model, hitch # 36502 will fit. For a different model 2008 Buick Lucerne the comparable Draw-Tite hitch is # 36309. I have included a link to the installation instructions and a...
    view full answer...
  • Available Trailer Hitch Receiver Sizes for 2000 Buick LaSabre
    All of the trailer hitches we carry that have been determined to fit the 2000 Buick LeSabre are Class II hitches and have a 1-1/4 inch hitch receiver. We do not have a hitch for the 2000 LeSabre that has a 2 inch hitch receiver. If you are looking to do some light towing, I recommend the Draw-Tite Class II Frame Receiver Hitch # 36309. The recommended ball mount for this trailer hitch is # 36063. You will also want a hitch ball, like a 2 inch hitch ball # 19258 or a 1-7/8 inch hitch...
    view full answer...
  • Draw-Tite Trailer Hitch # 36179 Installation Difficulty for a 1996 Ford Thunderbird
    You can certainly view the installation instructions for the Draw-Tite Trailer Hitch, # 36179. I have included a link to them for you to view. We rate the installation of this hitch as a 4 out of 10 for a novice installer. Difficulty is based on the estimated installation time and if there is any trimming or drilling required. Installation of this hitch on a 1996 Ford Thunderbird does not require any trimming or drilling and as long as you have the correct tools and a friend to lend...
    view full answer...
  • Trailer Hitch and Wiring for a 1988 Buick Estate Wagon
    First, if you have a 1988 Buick Century wagon then there are no trailer hitches that will fit it. But if you have the full size Buick Estate Wagon then trailer hitch # 36105 will fit. We haven't had the chance to install this hitch on a vehicle to take that measurement. But take a look at the diagram showing the hitch's position under the vehicle. It is recessed a good amount. The picture is also in the instructions I have linked. There is no welding required for installation. The hitch...
    view full answer...
    Image 1 for
  • Trailer Hitch for 1998 Cadillac DeVille to Allow Towing Small Utility Trailer
    We do offer one trailer hitch receiver for your 1998 Cadillac DeVille, part # 36267 from Draw-Tite. This is a 1-1/4-inch Class II hitch with 300-lb tongue weight and 3500-lb towing capacities. You will want to check your DeVille's owner's manual or speak to a local Cadillac dealership to confirm that the vehicle is rated to tow a trailer. It is possible that the hitch and car have different capacities, and when this is the case the lower-rated item determines the overall capacity for...
    view full answer...
  • Trailer Hitch for a 1993 Chevy Caprice Station Wagon
    The only trailer hitch that will fit a 1993 Chevy Caprice Wagon is the Draw-Tite Trailer Hitch, # 36105. I have included a link to the installation instructions for you to view. You would not want to modify a hitch made for a different vehicle because it would void the warranty and can compromise the structural integrity of the hitch making if unsafe for use. Hitches for the sedan have different mounting locations that the hitch for the wagon so you could not make it fit. If you plan...
    view full answer...
  • Will the Draw-Tite Class II Trailer Hitch Fit with Factory Dual-exhaust on a 1998 Mercury Sable
    I spoke with my contact at the manufacturer to make sure there were no issues with the factory dual exhaust on the 1998 Sable and found that you should have no trouble installing the hitch on your vehicle. You will need to temporarily lower the rear exhaust though. The installation instructions (see link) are clear and easy to follow. In addition to the hitch, you might also need the following to complete your towing set-up: Trailer Wiring Harness, part # 118333 Ball mount, part...
    view full answer...
  • How to Select a Hitch, Ball Mount and Trailer Wiring for a 2000 Buick LeSabre
    The appropriate choice of ball mount for use with your 2000 Buick LeSabre will depend on the particular trailer you are towing. You want to choose a ball mount that has the necessary rise (or drop) to match the heights of your tow vehicle and trailer. Safe towing requires that your trailer frame be level with the ground when hitched. Please refer to the included article concerning how to select a ball mount. I have also included a link to our product page for 1-1/4 inch Class II ball mounts....
    view full answer...
  • Is Drilling Involved when Installing Trailer Hitch # 36116 on a 1983 to 2010 Ford Crown Victoria
    For the 1983 to 2010 Ford Crown Victoria, Sedan and Wagon, you will need to drill 4 holes in the frame in order to install Draw-Tite Trailer Hitch, # 36116. I have included a link to the installation details. Step 4 in the instructions explains the required drilling. I have also included a link to a video showing installation on a similar vehicle, a 1992 Lincoln Town Car. The main difference on the Town Car and other vehicles compatible with this hitch is that on the Town Car there are...
    view full answer...
  • Using a 36078 Class II Drop Drawbar as a Rise Instead of a Drop
    The drawbar you mentioned is not intended to be used in the rise position and would only create a 3-1/2 inch rise. We do carry a 5 inch and a 3-1/8 inch rise drawbar (see links below) that will fit the Class II hitch. These drawbars all have a tongue weight capacity of 300 lbs and a towing capacity of 3500 lbs. Keep in mind that if you need a significantly higher or lower drawbar to tow (you are not able to use the manufacturer's recommended drawbar for the hitch), you will void the manufacturer's...
    view full answer...
  • Trailer Hitch Fit for 2000 Pontiac Bonneville
    The Curt # C13900 multi-fit hitch is a fit for full sized trucks and SUV's as well as some compact trucks and vans, and therefore wouldn't be a good fit for your 2000 Pontiac Bonneville. I'd recommend going with a custom fit hitch like part # C12044 which is a fit for all 2000 Pontiac Bonneville models except for the SLE. If you have a SLE model, use the Draw-Tite # 36309 hitch. If you'll be using the hitch for light duty towing, you'll also need a ball mount like # 36063. For a trailer...
    view full answer...
  • Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
    We do have a hitch available for the 1994 Buick Roadmaster Estate Wagon. You can use Draw-Tite trailer hitch, # 36105. Draw-Tite and Hidden Hitch are sister companies. I have included a link to the installation instructions for you to view. The Class III hitches for this vehicle are all obsolete. This hitch is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight. If the empty weight of the 1972 Airstream is at or near 3,500 pounds, you are likely to be over capacity...
    view full answer...
  • Replacement Installation Hardware for Draw-Tite # 36105 on 1985 Chevy Caprice Station Wagon
    We can certainly help you with that! You'll need the replacement hardware kit, part # RHK. Follow the link I've provided. When you're on the product page, type the part number # 36105 and the manufacturer Draw-Tite into the proper fields. Hitch installation hardware is a one-time use item only. If you'll be using the hitch for towing, you'll want to check your owner's manual to determine the towing capacity. You'll need the following to complete your towing system: 4 pole trailer...
    view full answer...
    Image 1 for
  • Hitch, Wiring and Bike & Kayak Carriers for 2002 Lincoln Continental
    We offer a 1-1/4-inch Class II hitch for your 2002 Lincoln Continental, part # 36252 from Draw-Tite. Towing also requires a wiring harness # 119179KIT, ball mount # 36063 and a hitch ball such as the 1-7/8-inch # 19257 or 2-inch # 19258 (depending on the size of the trailer's coupler). This hitch has a maximum towing capacity of 3500-lbs, which is the most a loaded trailer can weigh; and a maximum tongue weight rating of 300-lbs, which is the maximum downward force on the hitch, such...
    view full answer...
  • Hitch Recommendation for a 1989 Chevrolet Caprice Estate Wagon
    The Draw-Tite Hitch # 41105 that you referenced is discontinued, but was listed to fit a 1977 to 1990 Chevy Caprice Estate wagon. The current hitch for your 1989 Chevy Caprice Estate Wagon would be the Curt Class II 1-1/4 Inch Hitch, part # C12009. I attached installation instructions for you to check out. If you plan on doing some towing you may be interested in the following products to complete your towing setup: Trailer Wiring # 18252 (installation video attached) Class II...
    view full answer...
  • Can Appearance Panel be Trimmed and Reinstalled After Hitch Installation on 2003 Lincoln Town Car
    A lot of vehicles have those body or appearance panels. On the 2003 Lincoln Town Car it is not structural meaning that it isn't there to help hold the bumper or fascia up. It is basically helping to protect the metal parts above it from the elements. You might be able to reinstall the panel but it would require some extensive trimming and there aren't specific instructions that explain how to do so. Leaving it off is the way I would go. I have linked a video and the instructions to the...
    view full answer...
  • What Vehicles Does Trailer Hitch # 36116 and Drawbar # 36063 Fit
    The Draw-Tite Trailer Hitch, # 36116, (installation instructions linked below) will fit the following vehicles: 1983 to 1991 Mercury Colony Park Wagon 1992 to 2011 Ford Crown Victoria 1983 to 2011 Mercury Grand Marquis 1983 to 1991 Mercury Grand Marquis Wagon 1983 to 1991 Ford LTD Country Squire Wagon 1983 to 1991 Ford LTD Crown Victoria 1983 to 1991 Ford LTD Crown Victoria Wagon 1979 to 1982 Ford LTD Wagon 2003 to 2004 Mercury Marauder 1980 to 1983 Lincoln Mark VI 1979 to...
    view full answer...
  • Ball Mount Recommendation for Draw Tite Hitch for a 1996 Lincoln Town Car
    The hitch part # 36116 is a Class II hitch that has the part # 36063 as the recommended ball mount which has a 3-1/8 inch rise. If there was a Class II hitch compatible ball mount that had a 3-1/4 inch rise available you could use it, but we do not carry one. That being said, the difference between the two sizes would not be hardly noticeable so the 3-1/8 should work just fine. For a 2 inch ball you would need part # 19258, or for a 1-7/8 inch ball part # 19257.
    view full answer...
  • Can a Trailer Hitch Be Installed on a 1997 Mercury Sable by a Mechanic
    I would recommend the Draw-Tite Class II 1-1/4 Inch Hitch, part # 36252, for your 1997 Mercury Sable. This hitch has a maximum gross trailer weight capacity of 3,500 lbs and a tongue weight capacity of 300 lbs. You will need the recommended ball mount, part # 36063. You will also need a hitch ball like the Tow Ready 2 Inch Hitch Ball, part # 19258, and the Tow Ready T-One Wiring Harness, part # 118333. I am including a link to the installation instructions on the wiring harness. Anybody...
    view full answer...
  • Does Draw Tite Trailer Hitch 41116 Fit 1999 Mercury Grand Marquis
    The Draw Tite hitch part # 41116 is a confirmed fit for your 1996 Mercury Grand Marquis. For a ball mount you'd need the part # 36063, for a 1-7/8 inch hitch ball part # 19257, for 2 inch ball part # 19258, then for trailer wiring # 119179KIT.
    view full answer...
  • Hitch, Ball Mount and Wiring Recommendation For 1997 Lincoln Continental
    I do have an option for your 1997 Lincoln Continental but the Curt Trailer Hitch Receiver part # C12130 is a fit for 1981 - 2011 Lincoln Town Cars not Continentals. I recommend Draw-Tite Class II Frame Receiver Hitch part # 36252 for the 1997 Lincoln Continental. I have attached an installation video for your reference. There is not a custom fit wiring harness available for the Lincoln Continental so you would need Curt Powered Tail Light Converter part # C59236 which would need...
    view full answer...
  • Hitch Recommendation for a 1998 Oldsmobile 88
    The Draw-Tite Trailer Hitch Receiver # 36211 that you referenced is confirmed to fit your 1998 Oldsmobile 88. This hitch has capacities of 3,500 total trailer weight plus 300 lbs tongue weight, your trailer will need to weight less than this. Also, you need to check the owners manual of your vehicle as well to determine the capacities listed for your vehicle and be sure not to exceed the lower of the two ratings. To complete your towing setup you may also be interested in the following...
    view full answer...
  • Recommended Equipment for Towing a Small Trailer with a Chrysler LHS
    We offer a Class II hitch, part number 36170, available for your vehicle. The hitch is rated to tow 3,500 lbs and has a tongue weight capacity of 300 lbs. I would recommend checking the gross weight of the trailer, with it fully loaded to find your tongue weight. If your weight is under 300 lbs, then this hitch will accommodate your trailer application. You will also need the ballmount, part # 36063 and the 2 inch Ball, part # 19258, as well as a pin and clip, part # PC2 or a hitch lock,...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.