Recommend Hitch and Wiring For 1997 Toyota Tacoma

Updated 02/03/2020 | Published 02/02/2020

Products Featured in This Question

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

(2329)

$29.55

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(467)

$57.01

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(429)

$216.75

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(16)

$237.39

Question:

Will a hitch with the part number C12130 work on this truck ? It says designed to use with 36063 and 36064 97 Tacoma receiver hitch

asked by: Chris W

Expert Reply:

I do have an option for you but the Curt Trailer Hitch Receiver part # C12130 is designed to fit certain years of the Lincoln Town Cars and Mercury Grand Marquis so it will not fit the Toyota. The part # 36063 the sticker references is a ball mount that is recommended for use with the hitch determined by Draw-Tite.

For a 1997 Toyota Tacoma, I recommend Curt Trailer Hitch Receiver part # 13013 which is a custom fit design for the Toyota Tacoma that will not require any drilling to install. It matches up with the frame holes and bolts on. I have attached a video for your reference.

If you plan on doing some towing and need wiring for the Tacoma, Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector I recommend part # 118379 which will easily plug in behind the tail lights and give you a 4-way connector to plug your trailer into.

The ball mount would be determined by the amount of rise or drop you may need. I have attached a helpful article to figure the amount of rise or drop you need in a ball mount to tow level. I have also attached the selection of class III ball mounts available.