Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
(630 reviews)
Price: $38.61
In Stock
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Item # C45147
Our Price: $38.61
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (630)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45147
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Drop - 1 Inch
- Rise - 0 Inch
- 2 Inch Ball
- One Ball
- 3500 lbs GTW
- Class II
- CURT
- Steel Shank - Gloss Black
- Steel Ball
This convenient starter kit puts you on the towing fast track. Includes a 9-3/4" long powder coated ball mount with a 3/4" rise and a 1-1/4" drop; a pre-torqued 2" hitch ball; and a pin and clip.
Features:
- Starter kit contains the basic components needed for towing
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball
- Hitch ball provides connection point for your trailer's coupler
- Pre-torqued to factory specifications
- Pin and clip included - hitch lock sold separately
- Sturdy steel construction with rust-resistant finishes
- Black powder coat finish on ball mount
- Chrome-plated hitch ball
- Zinc finish on pin and clip
- Ball mount Assembled in the USA
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receiver
- Compatible with Curt Class I and Class II hitches
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
- Ball diameter: 2"
- Ball mount length: 9-3/4" from center of hitch pin hole to center of ball hole
- Rise: 3/4" from top of inside of hitch opening
- Drop: 1-1/4" from top of inside of hitch opening
- Warranty:
- Lifetime for ball mount
- 1-Year limited for hitch ball and pin and clip
45147 Curt Towing Starter Kit with 1-1/4 Inch Drop Ball Mount
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs - C45147
Average Customer Rating: 4.8 out of 5 stars (630 Customer Reviews)
This convenient starter kit puts you on the towing fast track. Includes a 9-3/4" long powder coated ball mount with a 3/4" rise and a 1-1/4" drop; a pre-torqued 2" hitch ball; and a pin and clip.by: Kenneth 08/11/2023
Excellent product. Good professional advise given so that I bought the right product to fit my existing hitch. Courteous, professional service. High quality, good value product. Fast shipping at reasonable cost. Highly recommended. If if need other products this is the place
by: Preteesh09/07/2020
Worked perfectly.
Super easy installation and it carried a U-haul 5x8 trailer 1000 miles with almost full capacity on tow-limits.
A little disappointed that the connecting rod doesn't fit perfectly into the receiver hitch. So, when there is no weight on the ball mount, it is wobbly and makes an annoying metal-to-metal clinking noise whenever you go over a ditch. You can easily correct it with a piece of cardboard stuffing for cushioning or just take it off when not it use.
Great piece of equipment, works perfectly! Super happy with the purchase.
by: B Cash06/23/2017
Everything arrived pretty quick and the install wasn't too difficult for 1 person (would've helped to have an extra set of hands). Took a couple tries to line everything up and realize that certain brackets needed to be unbolted before the hitch would align (tow hook on passenger side, and a couple near the rear driver's side exhaust hanger).
Minimal trimming required for the underside of the rear bumper plastic on the driver's side to make room on an 05 wrx wagon. Also needed at least 1 extra long exhaust hanger (kartboy) for the rear to make everything level with my 3" turbo back APS exhaust.
Haven't gotten a chance to tow with it yet, but it feels solid.
by: Michael04/22/2022
Great service, very helpful and friendly. If I need anything else in that line I will certainly use them
Comments
Been no trouble, it was easy to fit.
Michael - 04/23/2023by: Ron10/03/2022
My hitch ball fits like a glove into the receiver I installed this summer on my 2003 Suburu Baja. The ordering experience was easy and inspiring. Why can't all websites be so intelligent? I haven't used the hitch yet, but it's solid as a rock so I have no doubts all will be well.
by: Christopher08/29/2022
Pin broke with smallest UHaul trailer (unloaded) on back, dropping the hitch and trailer in the road. Fixed it with a better pin and hitch works fine now.
by: Taylor 09/13/2022
Easy to slide in and out of the hitch receiver, and it doesn't even rattle around and create noise when I'm towing.
by: Michael 07/24/2023
Excellent quality
by: Corey11/02/2022
The hitch install was easy, the electrical was a bit more tedious, but all is working well.
by: Robert 07/20/2023
Works good
by: Jason 04/29/2023
Good deal for this high quality combo.
by: Timmy 06/12/2023
Love it ! Great product for the price
by: MJ10/13/2017
Very heavy this product is. I was very surprised when I picked up the box it came in and felt the weight, which makes me glad I bought a bag to carry it in. The last hitch I ever got, from another plac, because I needed it in a pinch for my last car during a move, wasn't even close to being as heavy and it was about the same size and had the same weight capacity. The metal on that one also didn't seem right either, didn't have the smooth coating this one does. I am quite confident this ball mount from Curt, who has been in this business for decades, will easily take the weight of my trailer, which I use for things like mulch and stone, and then some.
Of course I don't ever plan to over load it, but if something ever happens that requires me to make fast lane changes, I am confident the ball mount won't give out on me. I will still use good safety chains though, I'd be foolish not to. If it's one thing I learned i life, anything can happen no matter how much you prepare ahead of time.
Comments
So far its worked well for my trailer, making mulch and plant runs much easier
MJ - 10/15/2018by: Roman 05/22/2023
Hitch looks great. Staff was very helpf ul
by: William 08/21/2022
Best price on small shank ball mount.
by: Michael 06/01/2023
you guy rock !
by: John03/23/2023
Good fit. Works well.
by: Dwain 03/31/2023
Excellent customer service and great quality products
by: Greg 03/12/2023
Absolutely what I expected. Installed in less than four minutes.
by: Jack J.04/27/2018
Received my Curt Towing starter kit for 1-1/4” hitches within four days. Made from quality material and craftsmanship. Looks and works great.
Comments
After a year using my Curt Towing kit I’m extremely pleased. Great, durable quality product. Thanks for fast efficient service.
Jack J - 04/27/2019by: George 03/21/2020
Quality product, well made, but design could be improved. The square bar that slides into the receiver on the car/truck is too long, resulting in the hitch ball being about a foot behind the bumper, at least it is on 2004 Ford Explorer. It becomes a trip, knee, or hinge hazard if not removed after towing.
by: David 10/03/2022
Product was exactly as advertised.
by: Mike 12/07/2022
Great service,
Thank you
by: Pam H09/28/2022
Works good!
by: Juan 09/13/2022
Perfect fit
25
630
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Is There a Ball Mount for a 1-1/4 Inch Hitch With 1 Inch of RiseThe good news is that the additional 1/4" of rise you are trying to obtain is likely not going to be necessary when towing a trailer. The vehicle should sag a bit once you attach the trailer so more than likely, the ball mount you have now will work just fine for you. I would not worry about the additional 1/4" or so when towing a trailer as it will not have any negative effect. The bad news is that we do not offer a high rise hitch ball that will fit the Curt Towing Starter Kit for...
view full answer... - Availability of 1-1/4 inch Stainless Steel Ball Mount with 2 inch Hitch BallWe do carry 1-1/4 inch ball mounts with a 2 inch diameter hitch ball already installed on it in steel, but it is not stainless steel. The steel ball mounts do come with a black powder coat finish though that protects it against rust and corrosion. When deciding the correct ball mount for your application you will want to look at the Rise and Drop that it has to offer and choose one that has the appropriate Rise or Drop for your application. For example the Curt # C45147 has a 1-1/4 inch...
view full answer... - Availability of Multipurpose Ball Mount for a 1-1/4 inch Trailer Hitch ReceiverWhen you get to the small 1-1/4 inch trailer hitch receivers there tends to be more restrictions on what they can accomplish due to their lighter weight capacities. Unfortunately there are no multi-purpose, or special ball mounts that can be used with a 1-1/4 inch receiver. You will only be able to use the regular ball mounts. Keep in mind that when choosing the correct ball mount for towing you will want to take your trailer and tow vehicle to a level area and measure from the ground...
view full answer... - How to Choose Correct Ball Mount for Towing with a 2009 Audi A6The correct ball mount for your 2009 Audi A6 really depends on the hitch that's installed and the height of your trailer coupler when the trailer is leveled out. For example, when we installed the Draw-Tite Sportframe Trailer Hitch Receiver # 24836 on a 2008 Audi A6 we found the receiver height (ground to inside top of receiver) was 10". So if the bottom of your trailer coupler is 11" then you need the Curt Towing Starter Kit # C45147 which has a 3/4" rise and comes with a 2" hitch ball. Attached...
view full answer... - How To Extend A 1 1/4" Hitch On A 2021 Subaru ForesterIn order to reduce the risk of your hitch ball coming in contact with the rear bumper on you 2021 Subaru Forester, you first need to take a measurement from the receiver pin hole to the outside of your bumper. This will determine exactly how long of a ball mount you will need, and if you will need a hitch extender or not. I recommend looking into the Curt Towing Starter Kit # C45147. This hitch kit comes with a 2" ball and fits 1- 1/4" receiver. It has a length of 9 3/4" from the center...
view full answer... - What are the Towing Capabilities of a 2016 Nissan Altima SRFrom my research on your 2016 Nissan Altima, it is not recommended to tow a trailer or vehicle dolly. The trailer hitch receivers made for your vehicle like the Draw-Tite Sportframe Trailer Hitch Receiver # 24796 you referenced are light duty Class I trailer hitch receivers designed for carrying accessories such as a cargo carrier or bike rack. If you do decide to tow with your vehicle you will need a custom vehicle wiring harness like the Tekonsha T-One Vehicle Wiring Harness with 4-Pole...
view full answer... - Trailer Hitch Recommendation For A 2022 Kia NiroWhen it comes to installing a trailer hitch on your 2022 Kia Niro The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 inch # 36600 will work. The hitch has a gross towing weight up to 3,500 pounds and has a tongue weight up to 350 pounds. Your Kia Niro has a towing capacity of 2,866 pounds, so do not go over the vehicle's towing capacity. It has a bolt-on installation with no welding required. The hitch has a concealed cross tube which will have a sleeker look under your...
view full answer... - Is Underbody Trim Panel Reinstalled on 2023 Mazda 3 For Draw-Tite Hitch InstallationYes, to install the Draw-Tite Sportframe Trailer Hitch Receiver # 24984 on your 2023 Mazda 3 you will need to remove that panel and it won't be put back into place. Hitch instructions only mention this when the hitch either prevents the panel fitting back into place or there is excessive trimming that needs to be done on the panel for it to fit back in place so it's easier to just remove it and leave it off. If you'll be using the hitch for towing I recommend installing the T-One Wiring...
view full answer... - Recommended Hitch and Wiring Harness for 2012 Mazda 5We have just what you're looking for. I recommend using the Curt # C11127 because of the heavier powder coating on the Curt hitches compared to others. This is a Class I hitch with a 1-1/4" receiver that is a confirmed fit on your 2012 Mazda 5. For a wiring harness I recommend using the Tekonsha T-One Wiring Harness # 118520, which will tee into the plugs for your vehicle lights and provide you with a 4 way plug for trailer lighting. You will also need a ball mount similar to the Curt...
view full answer... - Draw-Tite Sportframe Trailer Hitch Receiver for 2009 Volkswagen Jetta TDI SedanI have a solution for you but EcoHitch does not make a hitch receiver for any 2009 Volkswagen Jetta model. I checked with Ecohitch they did not start making hitch receivers for the Jetta SportWagen model's until 2010 and the Jetta sedans until 2015. I recommend the Curt Trailer Hitch item # C11474. This hitch receiver is a confirmed fit for the TDI models. It has a towing capacity of 2,000 lbs and maximum tongue weight of 200 lbs. This is a class 1 hitch with a 1-1/4" x 1-1/4" receiver...
view full answer...
- Trailer Hitch, 2 inch Ball, Ball Mount and Trailer Wiring for 2007 Chevy MalibuSounds like you are looking for a trailer hitch for your 2007 Chevy Impala and a ball mount that has a 2 inch ball on it. For that we have the Curt # C12272. Then for a ball mount you'd want the # C45147. For trailer wiring you'd also want the # 118439 and you'd be set.
view full answer... - Correct Trailer Hitch Fit for a 2006 Scion xBThe only available trailer hitch we offer for a 2006 Scion xB is the Curt Trailer Hitch Receiver part # C11487 which is a direct bolt-on fit with no drilling required. This trailer hitch has a class I, 1-1/4" receiver which can be used for towing (if applicable) or hitch mounted accessories like bike racks and cargo carriers. If you will be towing however you'll also need the T-One Vehicle Wiring Harness part # 118414 and Curt Towing Starter Kit part # C45147. Unfortunately, there are...
view full answer... - Availability Of A Class 3 Hitch For A 2002 Buick CenturyI do have an option for you, but we do not carry a class 3 hitch for a 2002 Buick Century. The only hitch available is a class 2 hitch like the # C12239 which has a 1-1/4" square receiver and a 3,500 lb towing capacity. You can absolutely still use this hitch for a small trailer. You will simply need a ball mount to go with the 1-1/4" hitch. For that I recommend the Curt starter kit # C45147 which comes with a draw bar, pin and clip and a 2" trailer ball. We also offer the 4 flat wiring...
view full answer... - Recommended Trailer Hitch for a 2011 Scion xBThe trailer hitch that I recommend using for your 2011 Scion xB is the Curt # C12490. This is a Class II trailer hitch with a 1-1/4" receiver. It has a 350 lb tongue weight rating and a 3,500 lb gross trailer weight rating. But your vehicle may not be rated for this much. You will need to confirm the weight rating of your Scion in your owner's manual. You will also need wiring, like the recommended T-Connector # C56035, and a ball mount kit like part # C45147. Check out the linked ball...
view full answer...
- Can Dirt Bike Carrier be Used on a 2014 Toyota Corolla LESince dirt bike carriers are designed to carry heavier loads all of them have 2" shanks. All of the trailer hitches available for your 2014 Toyota Corolla have a 1-1/4" receiver and so the only way you'll be able to transport your '95 Honda CR125 with your Corolla is to use a small trailer. It is worth noting though that the online owner's manual for your vehicle states that Toyota doesn't recommend towing a trailer. If you don't have any other vehicles to accomplish this with and you...
view full answer... - 1993 Toyota Previa Correct Trailer Hitch FitmentThe only trailer hitch available for your 1993 Toyota Previa is the Curt Class II Trailer Hitch # C12304 which has the 1-1/4" receiver. Since this is a Class II it's a bit stronger than most other 1-1/4" hitches. To complete your towing setup you need the Curt Wiring Kit # C56175 and a ball mount setup like the Curt Kit # C45147. Attached is a review video for you to check out.
view full answer... - Trailer Hitch Receiver Fit on 2001 BMW 325 ConvertibleThere is a single trailer hitch receiver that fits your 2001 BMW 325 convertible, so it's what you'll need to purchase, and that's a hitch from Curt. The correct fit is the following part number: - Curt Trailer Hitch Receiver # C11178
view full answer... - Hitch and Wiring Recommendation for a 2017 Nissan MicraThe Curt Trailer Hitch Receiver # C11453 will fit your 2017 Nissan Micra and the price on our website is US dollars. The hitch doesn't come with wiring but for that we have the Curt Upgraded Wiring Kit # C59496 which is circuit protected to keep your OEM wiring on your vehicle safe. If you plan on doing some towing then you can also pick up the Curt Towing Starter Kit # C45147 which comes with everything else you need for your application. The pricing for all parts can be found on their...
view full answer... - Trailer Hitch Confirmed to Fit a 2023 Subaru Impreza 5-Door WagonYes, there is a hitch that is confirmed to fit your 2023 Subaru Impreza 5-door Wagon. - Curt Trailer Hitch Receiver # C11465 This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 1-1/4" hitch receiver that will allow you to use hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing, you can round out a tow package by adding the Curt T-Connector Vehicle Wiring Harness # C56367 and the Curt Towing...
view full answer... - Trailer Hitch Availability for a 2007 Toyota Camry SEWe do have the Draw-Tite Trailer Hitch # 36416 that is compatible with your 2007 Toyota Camry SE. This is a Class II trailer hitch with a 1-1/4" receiver and it has a 3,500 lb gross trailer weight rating as well as a 300 lb tongue weight rating. When I looked up an online copy of your owner's manual it stated on page 327 that the max amount of trailer weight it can tow is 1,000 lbs and then it also stated that the max tongue weight of your Camry is 100 lbs. Even though the trailer hitch...
view full answer... - Is There a 1-1/4" Ball Mount with a 1" Diameter Hitch Ball Shank DiameterI may have a solution for you, but unfortunately the Curt # C45147 has a 3/4" hole for the hitch ball shank and I'm unable to locate any of the ball mounts we have available for a 1-1/4" hitch receiver that will allow for a larger than 3/4" shank diameter. With that said if you're towing with a 2021 Subaru Outback, those would typically have a 2" hitch receiver and have ball mounts available with holes for hitch balls with 1" shank diameters; you could use something like the TowSmart...
view full answer... - 2 inch Ball Mount and Tekonsha Wiring Harness for 2021 Honda HR-VI would be happy to help you find a ball mount for your 2021 Honda HR-V. I recommend the Curt Towing Starter Kit item # C45147. This kit includes a 9-3/4" long powder coated ball mount with a 3/4" rise and a 1-1/4" drop; a pre-torqued 2" hitch ball; and a pin and clip. If you need a 7/8" ball I recommend the Draw-Tite Drawbar for 1-1/4" Hitches item # 36051 and the 1-7/8" Hitch Ball item # 19256. I recommend adding the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
view full answer... - Trailer Hitch Fit for a 2022 Nissan VersaFrom my understanding it looks like the fourth generation Nissan Versa started in 2019 so the Draw-Tite Sportframe Trailer Hitch Receiver # 24887 should fit your 2022 Nissan Versa just fine but it does look like another user had to relocate the emission box forward by about 1" so you'll want to keep an eye out for that. Attached is a link to the installation instructions for you to check out and get a feel for what all this entails prior to purchasing. Since you'll be using this for towing...
view full answer... - Recommended Equipment for Towing a Trailer with a 1993 Buick RoadmasterThe only trailer hitch receiver that is available for your 1993 Buick Roadmaster Sedan is the Curt Trailer Hitch Receiver # C12009. It is a Class II hitch with a 1-1/4" receiver as you mentioned. It has a Gross Trailer Weight (GTW) of 3,500 lbs and a Tongue Weight (TW) of 350 lbs. If your Roadmaster and this trailer hitch are rated high enough for your trailer then you will just need Trailer Wiring # HM11141185 and a compatible ball mount and hitch ball. The Curt Towing Starter Kit # C45147...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-245-6423
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.